1. Produk Langkungview
The Ferm AX-Power 20V Quick Charger (Model CDA1175) is designed for rapid and efficient charging of Ferm AX-Power 20V Li-ion batteries. This charger is compatible with 1.5 Ah, 2.0 Ah, and 4.0 Ah AX-Power battery packs, ensuring your tools are ready for use with minimal downtime.
fitur konci ngawengku:
- Suitable for rechargeable Li-ion batteries.
- Compatible with Ferm AX-Power 20V tools.
- Fast charging: approximately 40 minutes for a 2.0 Ah battery.
- Fast charging: approximately 1 hour for a 4.0 Ah battery.
- Integrated LED indicator for charging status.
- Masukan voltage: 100-240 V, 50-60 Hz.
Gambar 1: Hareupeun view of the Ferm AX-Power 20V Quick Charger, showing the battery slot and LED indicators.
2. Parentah Kasalametan
Baca sakabeh warnings kaamanan jeung parentah taliti saméméh ngagunakeun carjer. Gagalna nuturkeun peringatan sareng petunjuk tiasa nyababkeun shock listrik, seuneu, sareng/atawa tatu anu serius.
Kasalametan Umum
- Pamakéan jero rohangan wungkul: This charger is designed for indoor use. Do not expose it to rain or wet conditions.
- Kasalametan listrik: Pastikeun voltage matches the charger's specifications (100-240V, 50-60Hz). Do not use damaged cords or plugs.
- Hindarkeun Overheating: Do not cover the charger during operation. Ensure adequate ventilation.
- Barudak sareng Panyusun: Keep children and untrained persons away from the charger and charging area.
- Pamariksaan: Before each use, inspect the charger, cable, and plug for any damage. Do not use a damaged charger.
- Cabut colokan lamun teu dipake: Salawasna cabut carjer tina stop kontak lamun teu dipake atawa saméméh beberesih.
Battery Specific Safety
- Batré anu cocog: Only charge Ferm AX-Power 20V Li-ion batteries with this charger. Charging other battery types may cause personal injury and damage.
- Kaayaan batré: Do not attempt to charge non-rechargeable batteries or visibly damaged batteries.
- Suhu: Charge batteries within the recommended temperature range (typically 0°C to 40°C).
- pembuangan: Dispose of batteries and chargers responsibly according to local regulations. Do not dispose of batteries in fire.
3. Eusi Paket
Punten parios eusi bungkusan saatos nampi pikeun mastikeun yén sadaya barang aya sareng henteu rusak:
- 1 x Ferm AX-Power 20V Quick Charger (Model CDA1175)
- 1 x Kabel Daya
- 1 x Manual Instruksi (Dokumén ieu)
Image 2: Product packaging, indicating the quick charger and its compatibility.
4. Setélan
Follow these steps to set up your Ferm AX-Power 20V Quick Charger:
- Ngabongkar: Taliti cabut carjer sareng sadaya asesoris tina bungkusan.
- panempatan: Place the charger on a stable, flat, and dry surface. Ensure it is away from direct sunlight, heat sources, and moisture.
- Sambungkeun Kakuatan: Insert the power cable into the charger's input port, then plug the other end into a suitable 100-240V, 50-60Hz electrical outlet.
Image 3: The Ferm AX-Power 20V Quick Charger connected to its power cord.
5. Parentah Operasi
Ngecas Batré
- Pastikeun carjer disambungkeun leres ka sumber kakuatan.
- Align the Ferm AX-Power 20V Li-ion battery with the charger slot and slide it in until it clicks securely into place.
- Observe the LED indicator on the charger:
- LED Beureum: Nunjukkeun yén batréna ayeuna nuju dicas.
- LED Héjo: Nunjukkeun yen batréna geus dicas pinuh.
- Once the green LED illuminates, the battery is fully charged. Disconnect the battery from the charger by pressing the release button (if present) and sliding it out.
- Unplug the charger from the power outlet when charging is complete or if the charger will not be used for an extended period.
Image 4: The Ferm AX-Power 20V Quick Charger with the battery slot ready for battery insertion.
Perkiraan Waktu Ngecas
- For a 2.0 Ah AX-Power 20V Li-ion battery: Approximately 40 minutes.
- For a 4.0 Ah AX-Power 20V Li-ion battery: Approximately 1 hour.
Actual charging times may vary based on battery condition, ambient temperature, and power supply.
6. Pangropéa
Proper maintenance ensures the longevity and safe operation of your charger:
- beberesih: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or immerse the charger in water.
- Panyimpenan: Store the charger in a clean, dry place, away from direct sunlight and extreme temperatures.
- Perawatan kabel: Do not wrap the power cable tightly around the charger. Avoid kinking or damaging the cable.
7. Cara ngungkulan
Upami anjeun mendakan masalah sareng carjer anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger not powering on / No LED indication | No power supply; Damaged power cable/plug; Faulty outlet. | Check power connection; Try a different outlet; Inspect cable for damage. |
| Battery not charging (Red LED not on) | Battery not properly inserted; Battery is faulty; Battery is not compatible. | Ensure battery is fully seated; Test with a different compatible battery; Verify battery type. |
| Charger or battery gets excessively hot | Poor ventilation; Damaged battery/charger. | Ensure charger is in a well-ventilated area; Discontinue use and contact support if overheating persists. |
If the problem persists after attempting these solutions, please contact Ferm customer support.
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Ferm |
| Nomer modél | CDA1175 |
| Masukan Voltage | 100-240 V |
| Frékuénsi Input | 50-60 Hz |
| Kaluaran Ayeuna | 2 A |
| Tipe Batré cocog | 20V Li-ion AX-Power Batteries |
| Waktu Ngecas (2.0 Ah) | Kira-kira. 40 menit |
| Waktu Ngecas (4.0 Ah) | Kira-kira. 1 jam |
9. Garansi jeung Rojongan
This Ferm AX-Power 20V Quick Charger typically comes with a garansi 2 taun from the date of purchase. Please refer to your purchase receipt or warranty card for specific terms and conditions.
For technical support, warranty claims, or spare parts information, please contact Ferm customer service through their official website or the contact details provided with your product documentation. Keep your proof of purchase for warranty validation.
