1. Bubuka
The Laserliner MultiWet-Finder Plus is a versatile diagnostic tool designed for non-destructive measurement of material moisture and ambient conditions. It provides quick and reliable readings for various building materials, along with air temperature, relative humidity, and dew point temperature. This manual provides essential information for the safe and efficient operation of your device.
Gambar 1: The Laserliner MultiWet-Finder Plus device. This image shows the front view of the device, highlighting its large digital display, control buttons, and the spherical sensor at the top.
2. Parentah Kasalametan
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.
- Jauhkeun alat ieu tina kalembaban sareng sinar panonpoé langsung.
- Do not open the device. Repairs should only be performed by authorized personnel.
- Use only specified batteries. Ensure correct polarity during installation.
- Hindarkeun tabrakan anu kuat atanapi alatna murag.
- Ulah dianggo alat ieu dina atmosfir anu gampang ngabeledug atanapi caket bahan anu gampang kaduruk.
- Buang batré sareng alatna numutkeun peraturan lokal.
3. Produk Langkungview
3.1 Komponén Alat
The MultiWet-Finder Plus features a robust design with intuitive controls and a clear display.
- Spherical Sensor: For non-destructive material moisture measurement.
- Layar LCD: Shows measurement values, modes, and indicators.
- Tombol MODE: To switch between measurement modes (Index, CM%, MASS%).
- Tombol REF: To set a reference value.
- MAX/SET Button: Ka view maximum/minimum values or confirm settings.
- Tombol PILARIAN: To activate the measurement.
- Temperature/Humidity Sensors: Located on the side for ambient condition measurements.
Gambar 2: Samping view of the device showing the integrated sensors for air temperature and relative humidity. The image also indicates the measurement ranges for these sensors: air temperature from -10°C to 60°C, relative humidity from 20% to 90% RH, and dew point temperature from -20°C to 60°C.
3.2 Indikator tampilan
The LCD display provides comprehensive information:
- Suhu (°C): Ambient air temperature.
- Relative Humidity (% RH): Ambient air humidity.
- Dew Point Temperature (°C): Calculated dew point.
- Moisture Index: A relative value indicating moisture content.
- CM% / MASS%: Specific moisture content for selected materials.
- DRY/WET Bar Graph: Visual indication of moisture level (green for dry, red for wet).
Gambar 3: The device's display showing readings in "INDEX MODE". This view includes air temperature, relative humidity, dew point, and a large numerical index value, along with the DRY/WET bar graph.
Gambar 4: The device's display showing readings in "CM%" or "MASS%" mode. This view provides specific moisture content percentages, alongside the ambient condition readings.
4. Setélan
4.1 Pamasangan batré
The MultiWet-Finder Plus requires standard AAA batteries for operation.
- Teang tempat panutup kompartemen batre dina tonggong alat.
- Open the cover by sliding or unscrewing it (refer to the diagram if available).
- Pasangkeun jumlah batré AAA anu diperyogikeun, pastikeun polaritasna leres (+/-).
- Tutup panutup kompartemen batré aman.
Gambar 5: The MultiWet-Finder Plus shown alongside its packaging, which indicates the use of AAA batteries. This image implies the battery type required for the device.
5. Parentah Operasi
5.1 Powering on / Pareum
Pencét jeung tahan tombol MODÉ tombol pikeun ngahurungkeun atanapi mareuman alat.
5.2 Milih Modeu Pangukuran
Pencét sakeudeung MODÉ button to cycle through the available measurement modes:
- INDEX Mode: Provides a relative moisture index, useful for quick comparisons and identifying moisture patterns.
- CM% / MASS% Mode: Displays specific moisture content as a percentage for selected material types. Refer to the device's internal material tables for accurate readings.
5.3 Taking a Material Moisture Measurement
- Select the desired measurement mode using the MODÉ kancing.
- Place the spherical sensor directly onto the surface of the material to be measured. Ensure full contact.
- Pencét éta PANGGILAN tombol pikeun ngamimitian pangukuran.
- Read the moisture value on the display. The device measures moisture up to a depth of approximately 40 mm.
Gambar 6: Illustration demonstrating the non-destructive measurement capability of the MultiWet-Finder Plus. The image shows the spherical sensor penetrating a material surface, indicating a measurement depth of up to 40 mm.
Gambar 7: Close-up of the device's display, highlighting the DRY/WET bar graph and the control buttons. The bar graph visually represents the moisture level, transitioning from green (dry) to red (wet).
5.4 Ambient Condition Measurement
The device continuously measures air temperature, relative humidity, and calculates the dew point temperature. These values are displayed on the upper part of the LCD screen.
5.5 Fungsi Réferénsi (REF)
The REF button allows you to set a reference value. This is useful for comparing current measurements against a known dry or acceptable moisture level in a specific material.
- Take a measurement on a known dry area of the material.
- Pencét jeung tahan tombol REF button to set this value as the reference.
- Subsequent measurements will show the deviation from this reference.
5.6 Max/Min Function (MAX SET)
Pencét éta MAX/SET tombol pikeun view the maximum or minimum measured values during a session. This helps in identifying the highest or lowest moisture points.
5.7 Digital Connection (App)
The MultiWet-Finder Plus supports digital connection to a smartphone application for data logging and analysis. Refer to the app's instructions for pairing and usage.
Gambar 8: The MultiWet-Finder Plus wirelessly connected to a smartphone displaying the "DIGITAL CONNECTION" feature. This image illustrates the device's capability to transmit data to a mobile application for further analysis and recording.
Gambar 9: The MultiWet-Finder Plus being used in a bathroom setting, indicating its application in detecting moisture in damp environments. The image shows the device pointed towards a wall, with a water droplet icon suggesting moisture detection.
6. Pangropéa
- beberesih: Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Panyimpenan: Store the device in a dry, cool place, away from direct sunlight. Remove batteries if storing for extended periods to prevent leakage.
- Kalibrasi: The device is factory calibrated. If you suspect inaccuracies, contact Laserliner support for recalibration services.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | Batré paéh atanapi teu leres diselapkeun. | Ganti batré ku nu anyar, mastikeun polaritasna bener. |
| Inaccurate moisture readings. | Poor contact with material, incorrect mode selected, or material outside measurement range. | Ensure full contact with the spherical sensor. Select the appropriate material mode. Consult specifications for measurement range. |
| Tampilan kosong atanapi kedip-kedip. | Low battery power or internal error. | Ganti batré. Lamun masalah persists, kontak rojongan customer. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | 082.091A |
| Dimensi produk | 5.51 x 5.51 x 8.66 inci |
| Beurat | 1.32 pon |
| Produsén | laserliner |
| Bahan | Stainless Steel (sensor ball, device body is likely plastic) |
| Measurement Depth | Approx. 40 mm (non-destructive) |
| Rentang Suhu hawa | -10°C nepi ka 60°C |
| Relatip Kalembaban Rentang | 20% nepi ka 90% RH |
| Kisaran Suhu Titik Embun | -20°C nepi ka 60°C |
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please contact Laserliner customer service or visit their official websitus. Simpen resi pameseran anjeun salaku bukti pameseran.
Pabrikan: laserliner
Websitus: www.laserliner.com (Kelample link, link sabenerna bisa rupa-rupa)
