ERICKHILL Infrared Thermometer Gun User Manual

1. Bubuka

The ERICKHILL Infrared Thermometer Gun is a non-contact temperature measurement device designed for various applications, including cooking, BBQ, HVAC, engine diagnostics, and pool temperature monitoring. It provides rapid and accurate temperature readings from -58°F to 1112°F (-50°C to 600°C) with a ±1.5% accuracy. Featuring adjustable emissivity and a 12:1 distance-to-spot ratio, this thermometer allows for precise measurements from a safe distance. Its user-friendly design includes a clear backlit LCD, laser targeting, and automatic shut-off for power saving.

Figure 1.1: ERICKHILL Infrared Thermometer Gun and included AAA batteries.

2. Émbaran Kasalametan

WARNING: This device is NOT intended for measuring human or animal body temperature. It is designed for industrial and household surface temperature measurements only.

Figure 2.1: The thermometer is not for human temperature measurement.

• Do not point the laser directly into eyes or at reflective surfaces.
• Jauhkeun alat ti barudak.
• Do not use the device in explosive gas, vapor, or dust environments.
• Hindarkeun ngalaan alat ka suhu atanapi kalembaban anu ekstrim.

3. Produk Langkungview

3.1 Eusi pakét

• 1 x ERICKHILL Infrared Thermometer
• 1 x Manual Pamaké
• 2 x Batré AAA

3.2 Komponén Alat

Figure 3.1: LCD Display and Component Overview.

• Pemicu Pangukuran: Press to activate and take readings.
• Layar LCD: Némbongkeun bacaan suhu, indikator modeu, sareng status batré.
• Pointer laser: Helps pinpoint the measurement target.
• Tombol °C/°F: Toggles between Celsius and Fahrenheit units.
• Tombol MODE: Used to adjust emissivity.
• Tombol Naék / Turun: Adjust emissivity value in MODE.

4. Setélan

4.1 Pamasangan batré

The ERICKHILL Infrared Thermometer requires two AAA batteries (included). To install or replace batteries:

1. Tangtukeun lokasi kompartemen batré dina gagang alat.
2. Buka panutup kompartemen batré.
3. Pasangkeun dua batré AAA, pastikeun polaritasna bener (+/-).
4. Tutup panutup kompartemen batré aman.

Gambar 4.1: Pamasangan batré.

5. Parentah Operasi

5.1 Pangukuran Dasar

Pikeun nyandak bacaan suhu:

1. Tunjukkeun térmométer ka permukaan anu dituju.
2. Press and hold the measurement trigger. The laser pointer will activate (if enabled) to indicate the measurement spot.
3. The temperature reading will appear on the LCD display within 0.5 seconds.
4. Release the trigger to hold the reading on the display. The device will automatically shut off after 12 seconds of inactivity.

Figure 5.1: Fast response and data hold features.

5.2 Émisivitas Anu Bisa Disaluyukeun

Emissivity is the ability of a material to emit thermal energy. Different materials have different emissivity values. Adjusting the emissivity setting (EMS) on the thermometer ensures more accurate readings for various surfaces. The default value is 0.95, suitable for most organic materials and painted surfaces. You can adjust it from 0.1 to 1.0.

1. With the device on, press the 'MODE' button. The 'EMS' indicator will appear on the display.
2. Use the Up/Down buttons to adjust the emissivity value.
3. Press the 'MODE' button again to confirm the setting or wait for the device to return to measurement mode automatically.

Figure 5.2: Emissivity Table for common materials.

5.3 Ngalihkeun Unit (°C/°F)

Pikeun ngaganti antara Celsius (°C) sareng Fahrenheit (°F):

• Press the '°C/°F' button located below the display. The unit will change instantly.

Figure 5.3: °C/°F unit switch button.

5.4 Backlight and Laser Control

The device features a backlight for visibility in low-light conditions and a laser pointer for precise targeting.

• To toggle the backlight, press the button with the light bulb icon.
• To toggle the laser pointer, press the button with the laser icon.

Figure 5.4: Backlight and Laser control buttons.

5.5 Otomatis Pareum

To conserve battery life, the thermometer will automatically shut down after 12 seconds of inactivity.

6. Aplikasi

The ERICKHILL Infrared Thermometer Gun is suitable for a wide range of non-contact temperature measurement tasks, including but not limited to:

• Masak sareng Panggang: Checking temperatures of ovens, grills, griddles, pizza stones, and cooking surfaces.
• HVAC: Monitoring air conditioning vents, heating systems, and insulation efficiency.
• otomotif: Measuring engine components, tires, and brake temperatures.
• Home Maintenance: Identifying hot or cold spots in walls, windows, and pipes.
• Pool and Spa: Checking water temperatures.
• Pamakéan industri: Monitoring machinery, electrical panels, and manufacturing processes.

Figure 6.1: Wide range of applications for the thermometer.

7. Pangropéa

To ensure the longevity and accuracy of your ERICKHILL Infrared Thermometer:

• beberesih: Lap alat nepi ka bersih ku kaén nu lemes,amp lawon. Ulah make cleaners abrasive atawa neuleumkeun alat dina cai.
• Panyimpenan: Store the device in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
• Perawatan lensa: The infrared lens is the most delicate part. Clean it gently with a soft cloth or cotton swab and rubbing alcohol if necessary.

8. Cara ngungkulan

• Alat teu hurung:
  • Pariksa naha batréna dipasang leres kalayan polaritasna anu leres.
  • Ganti ku batré AAA anyar.
• Bacaan teu akurat:
  • Ensure the emissivity setting is appropriate for the material being measured (refer to Section 5.2).
  • Check that the lens is clean and free from dust or debris.
  • Ensure the distance-to-spot ratio is respected; avoid measuring objects too close or too far.
  • Avoid measuring through transparent surfaces like glass, as they can lead to inaccurate readings.
• Laser teu jalan:
  • Ensure the laser function is enabled (refer to Section 5.4).
  • Pariksa tingkat batré.

9. Spésifikasi

10. Garansi jeung Rojongan

ERICKHILL provides a 3-year warranty and lifetime technical support for each product. If you have any questions or require assistance with your ERICKHILL Infrared Thermometer Gun, please do not hesitate to contact ERICKHILL customer service.