Erbauer EJS18-Li 18V Cordless Brushless Jigsaw Pamaké Manual

Produk Leuwihview

The Erbauer EJS18-Li is an 18V cordless brushless jigsaw designed for efficient and precise cutting. This powerful tool operates without a battery, allowing users to integrate it with their existing Erbauer 18V battery system. Its brushless motor technology ensures extended motor life, increased efficiency, and more power compared to brushed motors. It is suitable for various cutting tasks in wood, metal, and plastic, offering versatility for DIY enthusiasts and professionals.

Gambar 1: Hareupeun view of the Erbauer EJS18-Li 18V Cordless Brushless Jigsaw. The tool features a blue and black housing, a comfortable handle, and a robust base plate. The Erbauer logo is visible on the side.

Émbaran Kasalametan penting

Salawasna perhatikeun tindakan pencegahan kaamanan dasar nalika nganggo alat listrik pikeun ngirangan résiko kahuruan, sengatan listrik, sareng tatu pribadi. Baca sadaya pitunjuk sateuacan ngoperasikeun alat ieu.

• Wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves.
• Pastikeun wewengkon gawé téh well-cahayana sarta jelas tina halangan.
• Tetep barudak jeung bystanders jauh bari ngoperasikeun alat.
• Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Salawasna pegatkeun sambungan batré sateuacan ngadamel pangaluyuan, ngagentos asesoris, atanapi nyimpen alat.
• Anggo sabeulah anu leres pikeun bahan anu dipotong.
• Secure the workpiece before cutting to prevent movement.
• Maintain a firm grip on the tool and be aware of kickback.
• Nyimpen alat dina tempat anu garing sareng aman tina jangkauan barudak.

Disetél

1. Pamasangan batré

This jigsaw is supplied as a bare tool and requires an Erbauer 18V battery pack (sold separately). To install the battery, align the battery pack with the receptacle on the tool's base and slide it in until it clicks securely into place. Ensure the battery is fully charged before use.

2. Pamasangan sabeulah

1. Pastikeun pak batré dipiceun tina alat.
2. Manggihan sabeulah clamp uas dina hareupeun alat.
3. Nyorong sabeulah clamp lever forward to open the clamp.
4. Selapkeun gagang bilah gergaji ukir sapinuhna kana wadah bilah kalayan huntuna nyanghareup ka hareup.
5. Leupaskeun sabeulah clamp tuas pikeun ngamankeun sabeulah. Gently narik sabeulah pikeun mastikeun eta pageuh seated.

3. Adjusting the Base Plate (Bevel Angle)

The base plate can be adjusted for bevel cuts. Loosen the base plate locking screw, tilt the base plate to the desired angle (e.g., 0°, 15°, 30°, 45°), and then securely tighten the locking screw. Always ensure the base plate is firmly locked before cutting.

Operasi

1. Powering on / Pareum

To start the jigsaw, press the trigger switch. The tool will begin to operate. To stop the tool, release the trigger switch. Some models may feature a lock-on button for continuous operation; press the trigger, then the lock-on button, and release the trigger. To turn off, press the trigger again.

2. Kontrol Laju

The jigsaw features variable speed control, typically adjusted via a dial or by the pressure applied to the trigger. Select a lower speed for cutting harder materials or for more precise cuts, and a higher speed for softer materials or faster cutting.

3. Orbital Action

The orbital action setting allows the blade to move in an elliptical motion, providing faster cutting in softer materials like wood. Adjust the orbital action lever to the desired setting (usually 0 for no orbital action, and higher numbers for increased orbital action). Use setting 0 for metal and fine cuts.

4. Téhnik motong

• Potongan lempeng: Guide the jigsaw along a marked line, keeping the base plate flat against the workpiece. Apply steady, even pressure.
• Potongan melengkung: Use a narrower blade for tighter curves. Guide the tool slowly, allowing the blade to follow the curve without forcing it.
• Potongan terjun: For cuts starting in the middle of a workpiece, tilt the tool forward so the front edge of the base plate rests on the material. Start the tool, then slowly pivot it down until the blade cuts through the material.

Pangropéa

Regular maintenance ensures the longevity and optimal performance of your jigsaw. Always disconnect the battery before performing any maintenance.

• beberesih: Sanggeus unggal dipaké, bersihkeun alat ku lemes, damp cloth. Remove any dust or debris from the ventilation openings to prevent overheating. Do not use harsh chemicals or abrasive cleaners.
• Gantian sabeulah: Replace dull or damaged blades promptly. Refer to the "Blade Installation" section for proper replacement procedure.
• Lubrication: This tool features a brushless motor and sealed bearings, requiring no internal lubrication.
• Panyimpenan: Store the jigsaw in a dry, secure location, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery pack.
• Pamariksaan: Periodically inspect the power cord (if applicable, though this is cordless), switches, and housing for any signs of damage. If damage is found, have the tool serviced by a qualified technician.

Pamérésan masalah

Tingali tabel di handap pikeun masalah umum sareng solusi poténsialna.

If the problem persists after attempting these solutions, please contact Erbauer customer support or a qualified service technician.

spésifikasi

Garansi sareng Rojongan

This Erbauer EJS18-Li Jigsaw is covered by the manufacturer's original warranty. Specific warranty terms and duration may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Erbauer websitus pikeun inpo wincik.

For technical assistance, spare parts, or warranty claims, please contact Erbauer customer support through their official channels. Keep your proof of purchase for warranty validation.

While the product description mentions "original manufacturer's warranty," specific details such as duration or coverage are not provided in this manual. Please consult the product packaging or manufacturer's websitus kanggo inpormasi garansi anu lengkep.