1. Bubuka
Thank you for choosing the JABLOTRON™ Nanny Monitor BM-02. This device is designed to monitor your baby's breathing movements and provide an early warning in case of irregularities. It is a certified medical device, offering peace of mind for parents. This manual provides essential information for the safe and effective use of your Nanny Monitor BM-02.

Gambar 1: The product packaging for the JABLOTRON Nanny Monitor BM-02, highlighting its certification as a medical device, early warning capabilities, and ease of operation.
2. Émbaran Kasalametan penting
- Baca sagala parentah: Before using the Nanny Monitor BM-02, carefully read and understand all instructions in this manual.
- Not a medical device for diagnosis: This monitor is a breathing movement detector and is not intended to diagnose, treat, or cure any medical condition or disease. It is an aid for parents and caregivers.
- Professional medical advice: Always consult with a healthcare professional for any concerns regarding your baby's health.
- Penempatan anu leres: Ensure the sensor mat is placed correctly under the mattress and the main unit is securely attached to the crib, out of reach of the child.
- Kabel: Keep all cables and cords away from the baby's reach to prevent strangulation hazards.
- Sumber kakuatan: Paké ngan adaptor kakuatan disadiakeun kalawan alat.
- Kaayaan lingkungan: Ulah ngalaan alat ka suhu ekstrim, sinar panonpoé langsung, atawa Uap kaleuleuwihan.
- beberesih: Clean the device only as instructed in the maintenance section.
- pangawasan: The Nanny Monitor BM-02 is an aid and does not replace direct adult supervision of the child.
3. Eusi Paket
Mangga parios eusi pakét pikeun mastikeun yén sadaya barang aya sareng henteu ruksak:
- JABLOTRON Nanny Monitor BM-02 Main Unit
- Sensor Mat (1x)
- Adaptor kakuatan
- Manual pamaké
- Decorative Stickers (optional, for personalization)
- Antibacterial Tissues (for cleaning)

Gambar 2: Hiji overhead view of all items included in the JABLOTRON Nanny Monitor BM-02 package, including the main unit, sensor mat, power adapter, and documentation.
4. Setup Guide
Follow these steps to set up your Nanny Monitor BM-02:
- Pilih Lokasi: Select a stable and flat surface for the crib or bed where the baby will sleep.
- Place Sensor Mat: Carefully place the sensor mat directly on the solid base of the crib, under the mattress. Ensure the mat is flat and centered where the baby will lie.
- Connect Main Unit: Connect the cable from the sensor mat to the main Nanny Monitor BM-02 unit. Ensure the connection is secure.
- Position Main Unit: Attach the main unit to the side of the crib using the integrated hanger, ensuring it is firmly secured and out of the baby's reach. Alternatively, place it on a stable surface near the crib.
- Daya Hurung: Plug the power adapter into the main unit and then into a wall outlet. The device will perform a self-test, indicated by flashing lights.
- Tés awal: After powering on, place your hand on the mattress above the sensor mat and gently tap or press to simulate breathing movements. The green indicator light should illuminate, confirming detection.

Gambar 3: The sensor mat of the JABLOTRON Nanny Monitor BM-02 correctly positioned underneath a baby's crib mattress.

Gambar 4: The JABLOTRON Nanny Monitor BM-02 main unit securely attached to the side of a baby crib.
5. Parentah Operasi
The Nanny Monitor BM-02 is designed for simple operation. Once set up, it continuously monitors your baby's breathing movements.
Lampu Indikator:
- Green Light (Smiling Face): Indicates normal breathing movements are detected. This light will flash with each detected movement.
- Orange Light (Neutral Face): May indicate a weak signal or a need to check the sensor mat placement. Refer to troubleshooting if this persists.
- Red Light (Sad Face) & Audible Alarm: Activates if no breathing movement is detected for 20 seconds. This is a critical warning.
- Battery Indicator (Bottom Icon): Illuminates or flashes to indicate low battery power. Replace batteries promptly if applicable, or ensure power adapter is connected.

Gambar 5: The JABLOTRON Nanny Monitor BM-02 main monitoring unit, showing the indicator lights.
Tanggapan Alarm:
If the red light and audible alarm activate:
- Immediately check on your baby.
- If the baby is unresponsive, follow your pediatrician's instructions for emergency situations.
- If the baby is fine, check the sensor mat placement and ensure no external vibrations are interfering with the monitor.
6. Pangropéa
beberesih:
- Sok pegatkeun sambungan adaptor kakuatan sateuacan beberesih.
- Wipe the main unit and sensor mat with a soft, damp cloth. You may use the provided antibacterial tissues.
- Ulah make cleaners abrasive, pangleyur, atawa bahan kimia kasar.
- Pastikeun alatna garing pisan sateuacan disambungkeun deui ka listrik.
Ngagantian batré:
The Nanny Monitor BM-02 uses alkaline batteries (if not solely powered by adapter). When the battery indicator illuminates or flashes, replace the batteries immediately to ensure continuous operation. Refer to the battery compartment for specific battery type and replacement instructions.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alarm sering disada tanpa alesan anu jelas. |
|
|
| Green light not flashing, or orange light is on. |
|
|
| Taya kakuatan. |
|
|
8. Spésifikasi Téknis
| Fitur | Rincian |
|---|---|
| merek | JABLOTRON |
| Modél | BM-02 |
| Bahan | Mat sénsor |
| Warna | 1 Sensor Mat (White) |
| Alat nu cocog | Smartphone (Note: This might refer to app compatibility if available, or general device interaction. Based on product description, it's a standalone monitor.) |
| Dimensi produk | 53,5L x 31,5l x 6,5H cm |
| Item Beurat | 1,75 kg |
| Tipe sénsor | Sénsor tekanan |
| Katerangan batré | Alkali |
9. Garansi jeung Rojongan
For warranty information and technical support, please refer to the official JABLOTRON websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen bukti pameseran anjeun pikeun klaim garansi.
JABLOTRON Official Websitus: www.jablotron.com (Please verify the exact support URL on the product packaging or official documentation).





