Produk Leuwihview
The Artika Vester LED Vanity Light (model VAN-VE-CR) is a modern, chrome-finished lighting fixture designed for indoor damp locations, such as bathrooms. It features integrated LED technology, offering 1900 lumens of bright, 3000K warm white light with a long lifespan of 50,000 hours. This fixture is dimmable and controlled via a remote.
Gambar: Hareupeun view of the Artika Vester LED Vanity Light, showcasing its chrome finish and linear design.
Setup sareng Instalasi
This section provides general guidelines for installing the Artika Vester LED Vanity Light. Professional installation is recommended. Always ensure the power supply is turned off at the circuit breaker before beginning any electrical work.
Parabot anu diperyogikeun (Teu Kalebet):
- Obeng (Phillips sareng Flathead)
- Kawat Strippers
- Pita listrik
- Kacamata Kasalametan
- Voltage Panguji
Léngkah-léngkah pamasangan:
- Pareuman Daya: Locate the circuit breaker controlling the light fixture's power supply and switch it to the OFF position. Verify power is off using a voltage panguji.
- Hapus Perlengkapan Lama: Carefully remove any existing light fixture from the wall. Disconnect all wires and remove the mounting bracket.
- Pasang Bracket Pasang: Attach the new mounting bracket (supplied with the Vester light) to the electrical junction box on the wall using the provided screws. Ensure it is securely fastened.
- Sambungan Kawat: Connect the electrical wires from the fixture to the corresponding wires from the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Pasang Perlengkapan: Carefully align the Vester LED Vanity Light with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Mulangkeun Daya: Sakali fixture geus aman dipasang, balikkeun kakuatan dina breaker circuit.
No specific installation videos are available for this product. Please refer to the written instructions and consult a qualified electrician if you are unsure about any steps.
Parentah Operasi
The Artika Vester LED Vanity Light is designed for simple operation using its included remote control.
Fungsi Remote Control:
- Tombol Daya: Pencét pikeun ngahurungkeun atanapi mareuman lampu.
- Tombol dimming: Use the '+' and '-' buttons to increase or decrease the brightness level of the light. The Vester light is fully dimmable.
Ensure the remote control has working batteries and is pointed towards the light fixture for optimal response. The light operates at a fixed color temperature of 3000K (warm white).
Pangropéa
The Artika Vester LED Vanity Light requires minimal maintenance due to its durable construction and long-lasting integrated LED components.
beberesih:
- Always turn off the power to the fixture at the circuit breaker before cleaning.
- Make lemes, garing, atawa rada damp cloth to wipe the exterior surfaces of the fixture.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Do not spray cleaning solutions directly onto the fixture.
Komponen LED:
The LED light source in this fixture is integrated and not user-replaceable. With an average lifespan of 50,000 hours, regular replacement is not anticipated.
Pamérésan masalah
If you encounter issues with your Artika Vester LED Vanity Light, refer to the following common troubleshooting steps:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Taya kakuatan pikeun fixture nu. | Check the circuit breaker and wall switch. Ensure power is ON. |
| Sambungan kawat leupas. | Turn off power at the breaker. Inspect wire connections inside the junction box and re-secure if loose. | |
| Batré kadali jauh maot. | Ganti batré dina kadali jauh. | |
| Lampu kedip-kedip atanapi redup teu disangka-sangka. | switch dimmer sauyunan. | Ensure you are using an LED-compatible dimmer switch. Consult a qualified electrician. |
| Sambungan kawat leupas. | Turn off power at the breaker. Inspect wire connections and re-secure. | |
| Kadali jauh teu ngabales. | Batré jarak jauh pareum atanapi lemah. | Ganti batré kadali jauh. |
| Obstruction between remote and fixture. | Ensure a clear line of sight between the remote and the light fixture. |
Upami léngkah-léngkah ieu henteu ngabéréskeun masalah, mangga ngahubungi dukungan palanggan.
spésifikasi
| merek | Artika |
| Nomer modél | VAN-VE-CR |
| Dimensi produk | 27" L x 4.4" W x 4.4" H |
| Wattage | 21 Watt |
| Voltage | 120 volt |
| Caang | 1900 Lumén |
| Suhu Warna (CCT) | 3000K (Bodas haneut) |
| Indéks Rendering Warna (CRI) | 80 |
| Rata Kahirupan | 50,000 Jam |
| Bahan | Paduan Steel, Plastik |
| Tipe Pamasangan | Tembok Gunung |
| Métode kontrol | Kadali jauh |
| Peunteun lokasi | Damp Location (Indoor) |
| UPC | 846979036677 |
Émbaran jaminan
Specific warranty details for the Artika Vester LED Vanity Light (VAN-VE-CR) are typically provided with the product packaging or available on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For detailed information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the Artika websitus.
Ngarojong
For further assistance, technical support, or to inquire about replacement parts, please contact Artika customer service. You can typically find contact information on the manufacturer's websitus atanapi dina bungkusan produk.
You may also visit the official Artika store on Amazon for product information and updates: Artika Store on Amazon
