1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the AKO AKO-15692 Three-Phase PROPlus Basic Electronic Control Panel with Defrost 10200W. Please read this manual thoroughly before installation and operation.
Gambar 1: Hareupeun view of the AKO AKO-15692 control panel. This image displays the front of the AKO AKO-15692 control panel. On the left, a digital display shows '-19.4' with 'ECO' and defrost indicators. Below the display are navigation buttons (up, down, set, escape, power, question mark, light). The right side features a transparent hinged cover, revealing internal circuit breakers and a rotary switch.
2. Émbaran Kasalametan
Salawasna perhatikeun tindakan pencegahan kaamanan ieu pikeun nyegah tatu sareng karusakan kana alat:
- Pamasangan sareng pangropéa kedah dilakukeun ku tanaga anu mumpuni wungkul.
- Disconnect power before performing any work on the control panel.
- Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.
- Do not expose the unit to moisture or extreme temperatures outside its operating range.
- Pastikeun sadaya sambungan aman sareng leres sateuacan nganggo daya.
3. Produk Langkungview
The AKO-15692 is a three-phase electronic control panel designed for refrigeration systems requiring defrost management. It integrates control, protection, and monitoring functions for optimal performance and energy efficiency.
Fitur konci:
- Three-phase power compatibility (up to 10200W).
- Integrated defrost control.
- Digital display for temperature and status.
- User-friendly control interface.
- Robust enclosure for industrial environments.
4. Setup jeung Instalasi
4.1 Ngabongkar bungkusan
Carefully unpack the control panel and inspect it for any signs of damage. Retain the packaging materials for future transport or storage.
4.2 Pamasangan
The unit is designed for screw-mounted installation. Choose a dry, well-ventilated location away from direct heat sources or excessive vibration. Ensure sufficient space for wiring and ventilation.
- Mark the mounting points on the wall using the panel's dimensions.
- Bor liang luyu jeung selapkeun colokan témbok lamun perlu.
- Secure the control panel to the wall using suitable screws.
4.3 Sambungan Listrik
All electrical connections must comply with local and national electrical codes. Refer to the wiring diagram provided inside the panel cover for specific connections.
- Sasayogian tanaga: Connect the three-phase power supply to the designated terminals.
- Kompresor: Connect the compressor load to the appropriate output terminals.
- Defrost Heaters: Connect defrost heaters to their dedicated output terminals.
- Sénsor: Connect temperature sensors to the specified input terminals.
- Grounding: Ensure all grounding connections are properly made.
Warning: Incorrect wiring can lead to severe damage or electrical shock. Consult a qualified electrician if unsure.
5. Parentah Operasi
5.1 Powering on / Pareum
Pencét éta ⏻ (Power) button to turn the unit on or off. The digital display will illuminate upon power-on.
5.2 Pintonan sareng Napigasi
The digital display shows the current temperature or system status. Use the following buttons for navigation and settings:
- SET: Enter/confirm settings.
- ▲ (Luhur): Increase values or navigate up.
- ▼ (Ka handap): Decrease values or navigate down.
- ESC: Exit menu or cancel operation.
- ?: Access help or information.
- ☀︎ (Light): Control internal light (if applicable) or display brightness.
5.3 Nyetel Suhu
- Pencét éta SET button. The current setpoint will flash.
- Ngagunakeun éta ▲ or ▼ tombol pikeun nyaluyukeun suhu nu dipikahoyong.
- Pencét SET again to confirm the new setpoint.
5.4 Siklus Defrost
The unit features automatic defrost control. Parameters such as defrost interval and duration can be configured through the settings menu. Consult the detailed programming section in the full manual for advanced configurations.
6. Pangropéa
Regular maintenance ensures optimal performance and longevity of the control panel.
6.1 beberesih
- Pegatkeun sambungan kakuatan saméméh beberesih.
- Ngusap luar ku hipu, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Pastikeun teu aya Uap anu asup kana komponén internal.
6.2 Pamariksaan
périodik mariksa di handap:
- Wiring: Pariksa kabel leupas atawa ruksak.
- Terminal: Pastikeun sadaya sambungan terminal pageuh.
- Kandang: Look for any signs of physical damage or corrosion.
- Ventilasi: Pastikeun liang ventilasina bersih sareng teu aya halangan.
7. Cara ngungkulan
Bagian ieu ngabahas masalah umum. Pikeun masalah anu langkung rumit, hubungi dukungan téknis.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Panel teu tiasa dihurungkeun. | No power supply; Blown fuse/tripped breaker. | Check main power supply; Inspect fuses/breakers and reset if necessary. |
| Maca suhu anu salah. | Faulty sensor; Sensor incorrectly placed. | Check sensor connections; Verify sensor placement; Replace sensor if faulty. |
| Defrost not initiating. | Incorrect defrost settings; Defrost heater fault. | Review defrost parameters in settings; Check defrost heater and wiring. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modél | AKO-15692 |
| merek | AKO |
| Peunteun kakuatan | 10200W |
| Fase | tilu-fase |
| Tipe Pamasangan | Dipasang-pasang |
| Fungsi Defrost | terpadu |
9. Garansi jeung Rojongan
9.1 Émbaran jaminan
AKO products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AKO websitus pikeun istilah jeung kaayaan lengkep.
9.2 Rojongan Téknis
For technical assistance, spare parts, or service inquiries, please contact AKO customer support. Have your model number (AKO-15692) and purchase date ready when contacting support.
Contact information (e.g., phone, email, website) can typically be found on the product packaging or the official AKO websitus.
