Buku Panduan Pangguna Stop Kontak Timer Digital anu Tiasa Diprogram di Jero Ruangan Tiffcofio MH-269A

Bubuka

This manual provides detailed instructions for the setup, operation, and maintenance of your Tiffcofio MH-269A Indoor Digital Programmable Timer Outlet. Please read this manual thoroughly before using the device to ensure proper function and safety.

Émbaran Kasalametan

• Kanggo dianggo di jero rohangan hungkul. Ulah kakeunaan kalembaban atanapi suhu anu ekstrim.
• Pastikeun timer dipasang pageuh kana stop kontak anu di-ground.
• Do not exceed the maximum electrical rating of the device.
• Unplug the timer from the power source before cleaning.
• Do not disassemble or attempt to repair the device. Contact customer support for assistance.

Fitur produk

• Bisa Diprogram 7 Dinten: Sesuaikeun jadwal pikeun unggal dinten dina saminggu.
• 8 ON/OFF Programs: Set up to 8 distinct ON/OFF cycles.
• Stopkontak Ganda anu Digroundkeun: Control two devices simultaneously.
• Built-in Battery Backup: Nahan setélan salila kakuatan outages (requires LR1130 battery).
• Manual Override: Easily switch between ON, OFF, and AUTO modes.
• Mode libur: Randomly turns lights ON/OFF to simulate occupancy.

Gambar: Leuwihview of the Tiffcofio Digital Timer Outlet, highlighting its key features such as dual grounded outlets, energy saving capability, manual override function, and 8 ON/OFF program settings.

Eusi pakét

• Tiffcofio MH-269A Digital Programmable Timer Outlet (2 units)
• Manual pamaké

Idéntifikasi komponén

Gambar: Hareupeun view of the Tiffcofio Digital Timer Outlet, displaying the LCD screen and control buttons for setting time and programs.

1. Layar LCD: Némbongkeun waktos, dinten, sareng status program ayeuna.
2. Tombol MINGGU: Selects the day(s) of the week.
3. Tombol JAM: Adjusts the hour.
4. Tombol MIN: Adjusts the minute.
5. Tombol Waktos: Asup kana mode setelan waktos.
6. ON/OFF AUTO Button: Cycles through ON, OFF, and AUTO modes.
7. Tombol PROG: Enters program setting mode.
8. Tombol RESET: Clears all settings and resets the timer.
9. Outlet grounded: Two outlets for connecting devices.
10. Kompartemen batré: Houses the LR1130 backup battery.

Disetél

1. Initial Setup and Battery Installation

Before first use, or after a prolonged period of disuse, install or check the backup battery. The timer uses an LR1130 button cell battery to retain settings during power outages.

Gambar: Tukangeun view of the timer outlet with the battery compartment open, showing where to insert the LR1130 backup battery.

1. Panggihan kompartemen batré dina tonggong timer.
2. Buka panutup kompartemen.
3. Insert one LR1130 button cell battery, ensuring correct polarity (+/-).
4. Tutup panutup kompartemen.

2. Resetting the Timer

Pencét éta RESET button with a small pointed object (e.g., a pen tip) to clear all previous settings and ensure a fresh start. The display will show "0:00" and all indicators will be off.

3. Setting Current Time and Day

1. Pencét éta WAKTU button once. The hour digits will flash.
2. Ngagunakeun éta JAM tombol pikeun ngeset jam ayeuna.
3. Ngagunakeun éta MIN tombol pikeun nyetél menit ayeuna.
4. Pencét éta MINGGU button to select the current day of the week.
5. Pencét éta WAKTU tombol deui pikeun ngonfirmasi tur kaluar mode setelan waktos.

Parentah Operasi

1. Ngaprogram Siklus ON/OFF

The timer allows for up to 8 distinct ON/OFF programs. Each program can be set for specific days or combinations of days.

Image: The timer outlet connected to a coffee maker, illustrating its use for scheduling. A table lists various day combinations for programming, such as 'Monday Only', 'Weekdays', and 'Every Day'.

1. Pencét éta PROG button once. The display will show "1 ON" and the hour digits will flash.
2. Ngagunakeun éta JAM jeung MIN tombol pikeun nyetel waktos ON anu dipikahoyong pikeun Program 1.
3. Pencét éta MINGGU button repeatedly to cycle through the 11 available day combinations (e.g., MO, TU, WE, TH, FR, SA, SU, MO-FR, SA-SU, MO-SA, MO-SU). Select your desired day(s).
4. Pencét éta PROG button again. The display will show "1 OFF" and the hour digits will flash.
5. Ngagunakeun éta JAM jeung MIN tombol pikeun nyetel waktos OFF anu dipikahoyong pikeun Program 1.
6. Repeat steps 3-5 for any additional programs (up to 8).
7. Saatos netepkeun sadaya program anu dipikahoyong, pencét tombol WAKTU button to exit program setting mode.

2. Manual Override (ON/OFF AUTO)

The ON/OFF AUTO button allows you to manually control the timer's output.

• Pencét sakali kanggo ON: The timer will stay ON continuously, overriding all programs.
• Pencét deui pikeun Pareum: The timer will stay OFF continuously, overriding all programs.
• Pencét katilu kalina pikeun OTOMATIS: The timer will operate according to the programmed ON/OFF cycles. This is the standard operating mode for scheduled automation.

3. Vacation Mode (Random ON/OFF)

To activate vacation mode, which randomly turns devices ON and OFF to simulate occupancy:

1. Pastikeun timer aya dina OTOMATIS modus.
2. Pencét jeung tahan tombol MINGGU button for 3 seconds. The display will show "RND" or a similar indicator.
3. Pikeun nganonaktipkeun, pencét jeung tahan tombol MINGGU tombol pikeun 3 detik deui.

Pangropéa

• beberesih: Unplug the timer before cleaning. Wipe with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Ngagantian batré: If the display goes blank or settings are lost frequently during power outages, replace the LR1130 backup battery.
• Panyimpenan: Simpen timer di tempat anu tiis sareng garing nalika henteu dianggo.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

Tiffcofio products are designed for reliability and performance. For warranty information or technical support, please contact our customer service team. Our professional and reliable after-sales service will assist you within 6 hours.

Contact Information: Refer to your product packaging or the official Tiffcofio websitus pikeun detil kontak panganyarna.