1. Bubuka
This manual provides detailed instructions for the proper use, setup, and maintenance of the Hantek 6254BE Digital Automotive PC Oscilloscope. This device is designed for automotive diagnostics and general electronic measurements, offering high performance and versatility when connected to a personal computer.
2. Émbaran Kasalametan
Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan ngoperasikeun alat ieu pikeun nyegah cilaka atanapi karusakan. Simpen manual ieu kanggo rujukan ka hareup.
- Always connect the oscilloscope to a computer via the provided USB cable.
- Ensure all connections are secure before applying power or making measurements.
- Ulah ngalaan alat ka beueus, suhu ekstrim, atawa sinar panonpoé langsung.
- Ulah nganggo alat ieu dina lingkungan anu aya gangguan éléktromagnétik anu kuat.
- Only use accessories and probes supplied or approved by Hantek.
- Rujuk ngalayanan ka tanaga anu mumpuni wungkul.
3. Eusi Paket
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your vendor immediately.
Gambar 3.1: Hantek 6254BE Digital Oscilloscope and included accessories. This image displays the main oscilloscope unit, various test leads, probes, USB cable, and a software CD.
- Hantek 6254BE Digital Oscilloscope Unit
- Kabel USB
- Test Probes (Quantity and type may vary by package)
- Alligator Clip Leads
- Software CD (or download link)
- Manual pangguna (dokumén ieu)
4. Produk Langkungview
The Hantek 6254BE is a 4-channel PC-based digital oscilloscope designed for a wide range of applications, particularly in automotive diagnostics. It features a 250MHz bandwidth, 1GSa/s real-time sampling rate, and high input sensitivity.
4.1. Fitur konci
- Saluran: 4
- Bandwidth: 250MHz
- Waktu nyata Sampling Laju: 1GSa/s
- Sensitipitas Input: 2mV-10V/DIV
- Pangukuran otomatis: Over 20 types, including PASS/FAIL check.
- Konektipitas: USB 2.0 (Plug and Play)
- Kasaluyuan Sistim: Supports Windows 7, 8, 10, 11.
4.2. Tata perenah
Gambar 4.1: Panel payun sareng tukang views of the Hantek 6254BE. The front panel shows the four BNC input channels (CH1, CH2, CH3, CH4). The rear panel includes the USB connection port and a 5V power input, though the USB XITM interface is noted as non-functional.
- CH1-CH4 BNC Inputs: Connect test probes and leads here.
- Port USB: Connects to your PC for data transfer and power.
- Input Daya 5V: Optional external power supply connection (if required by specific applications or PC USB power limitations).
- ventilasi: Located on the sides and bottom for heat dissipation, ensuring stable performance.
Gambar 4.2: Dimensions of the Hantek 6254BE (175mm x 105mm x 25mm) and an illustration of its ventilation system. The vents are crucial for maintaining optimal operating temperature and device longevity.
5. Parentah Setup
Follow these steps to set up your Hantek 6254BE oscilloscope.
5.1. Sarat Sistim
- Operating System: Windows 7, Windows 8, Windows 10, or Windows 11.
- USB 2.0 port atawa saluhureuna.
- Sufficient free disk space for software installation.
5.2. Pamasangan parangkat lunak
- Insert the provided software CD into your computer's CD-ROM drive. If no CD drive is available, download the latest software and drivers from the official Hantek websitus.
- Run the installer executable (e.g., "setup.exe") and follow the on-screen prompts.
- During installation, ensure that all necessary drivers for the Hantek 6254BE are selected and installed.
- Restart your computer if prompted after installation is complete.
5.3. Connecting the Oscilloscope
- Connect one end of the USB cable to the USB port on the rear panel of the Hantek 6254BE.
- Sambungkeun tungtung kabel USB anu sanésna kana port USB 2.0 anu sayogi dina komputer anjeun.
- The operating system should automatically detect the device and install any remaining drivers.
- Launch the Hantek oscilloscope software from your desktop or Start Menu.
Gambar 5.1: The Hantek 6254BE connected to a tablet PC, demonstrating its compatibility with various Windows-based devices. Multiple units can be connected to a single computer for expanded channel capabilities.
Gambar 5.2: The Hantek 6254BE connected to a laptop, displaying the oscilloscope software interface. This setup illustrates the typical operating environment for the device.
6. Parentah Operasi
This section outlines the basic operation of the Hantek 6254BE using the PC software.
6.1. Antarbeungeut Parangkat Lunakview
Upon launching the software, you will see the main waveform display area, control panels for each channel, trigger settings, time base controls, and measurement functions. Familiarize yourself with the layout.
6.2. Connecting Probes and Making Measurements
- Select the appropriate probe for your measurement. For general purpose, use the provided passive probes. For automotive applications, specialized probes (e.g., ignition probes, current clamps) may be required.
- Connect the probe to one of the BNC input channels (CH1-CH4) on the oscilloscope.
- Attach the probe tip to the test point and the ground clip to a suitable ground reference in the circuit under test.
- In the software, enable the corresponding channel and adjust the vertical scale (Volts/Div) and horizontal scale (Time/Div) to view the waveform clearly.
- Adjust trigger settings (Type, Source, Level) to stabilize the waveform.
6.3. Automotive Measurement Functions
The Hantek 6254BE is equipped with extensive automotive diagnostic capabilities, including over 80 types of pre-configured measurements.
Gambar 6.1: The Hantek 6254BE in use for automotive diagnostics, connected to an engine. The software displays various waveforms, indicating its capability for ignition analysis, sensor testing, and bus diagnosis.
- Ignition Action: Analyze ignition patterns.
- Sensor Diagnosis: Test various automotive sensors (e.g., O2, MAP, Crankshaft Position).
- Bus Diagnosis: Monitor CAN bus, LIN bus, etc.
- Charging Circuits: Evaluate battery and alternator performance.
- Starter Circuits: Diagnose starter motor issues.
Access these functions through the dedicated automotive menu within the software. Each function typically provides guided setup and analysis tools.
6.4. Automatic Measurement and Analysis
The software offers more than 20 types of automatic measurements (e.g., Vpp, Vmax, Vmin, Freq, Period, Rise Time, Fall Time). These can be displayed directly on the screen for quick analysis.
- PASS/FAIL Check: Configure limits for specific waveform parameters. The system will automatically indicate if a waveform passes or fails these criteria.
- Dynamic Cursor Tracking: Use cursors to precisely measure voltage and time differences on the waveform.
- Waveform Record and Replay: Capture and save long waveform sequences for later review jeung analisis.
7. Pangropéa
Proper maintenance ensures the longevity and accuracy of your Hantek 6254BE oscilloscope.
- beberesih: Anggo kaén anu lemes sareng garing pikeun ngabersihan alat. Ulah make cleaners abrasive atawa pangleyur.
- Panyimpenan: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures.
- Perawatan Probe: Handle probes carefully. Avoid bending or stressing the cables. Calibrate probes regularly if the software provides this option.
- Apdet parangkat lunak: Periodically check the Hantek website for software and driver updates to ensure optimal performance and access to new features.
8. Cara ngungkulan
This section addresses common issues you might encounter with your Hantek 6254BE.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu dipikawanoh ku PC. |
|
|
| Teu aya bentuk gelombang anu ditampilkeun. |
|
|
| Bentuk gelombang anu teu stabil atanapi bising. |
|
|
9. Spésifikasi
Detailed technical specifications for the Hantek 6254BE Digital Automotive PC Oscilloscope.
| Parameter | Nilai |
|---|---|
| Modél | 6254BE |
| Saluran | 4 |
| Bandwidth | 250 MHz |
| Waktu nyata Sampling Laju | 1 GSa/s |
| Sensitipitas Input | 2mV/DIV - 10V/DIV |
| Resolusi nangtung | 8 bit |
| Masukan Gandeng | DC, AC, GND |
| Input impedansi | 1MΩ 25pF |
| Max Input Voltage | 40V (Probe X1) |
| Waktos Range Base | 2ns/div - 1000s/div |
| Modeu pemicu | Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under time, UART, LIN, CAN, SPI, IIC |
| Automatic Measurements | Over 20 types (Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Delay A→B↑, Delay A→B↓, Phase A→B↑, Phase A→B↓) |
| Panganteur | USB 2.0 |
| Rojongan System Operasi | Windows 7, Windows 8, Windows 10, Windows 11 |
| Ukuran (L x W x H) | 175mm x 105mm x 25mm (kira-kira 6.9" x 4" x 1") |
| Beurat | Kira-kira. 1.35 kg (2.98 lbs) |
10. Garansi jeung Rojongan
Hantek provides a limited warranty for this product against defects in materials and workmanship. The warranty period typically starts from the date of purchase. Please refer to the warranty card included with your product or visit the official Hantek websitus pikeun istilah jeung kaayaan jaminan lengkep.
For technical support, software updates, or service inquiries, please contact Hantek customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your product model (6254BE) and serial number ready.
Pabrikan: Hantek
Websitus: www.hantek.com