Buku Panduan Pangguna HyperX Audio Mixer (Modél 73C12AA)

Bubuka

The HyperX Audio Mixer is designed for creators requiring precise control over their audio sources. It facilitates mixing up to three audio inputs: an XLR microphone, a 3.5mm microphone, and a stereo 3.5mm line input. This compact USB 3-track mixer offers intuitive controls for seamless audio management during recording or streaming. It supports 24-bit/96kHz recording, ensuring professional-quality sound.

Eusi pakét

• HyperX Audio Mixer
• Kabel XLR
• USB-C ka USB-A Cable
• Kabel 3.5 mm

Produk Leuwihview

Panel hareup

The front panel features three faders for adjusting input levels, two volume knobs for line and headphone outputs, and individual mute buttons for each channel. A 48V phantom power button and clip/signal indicators are also present.

Hareupeun view of the HyperX Audio Mixer, showing faders, knobs, and indicators.

Palabuhan Panel Rear

The rear panel provides connectivity options including a USB-C port for computer connection, a 3.5mm headphone output, a 3.5mm stereo line input, a 3.5mm microphone input, and an XLR microphone input.

Close-up of the rear panel ports: USB-C, 3.5mm headphone, 3.5mm line, 3.5mm mic, and XLR mic.

Disetél

1. Nyambung ka Komputer: Use the provided USB-C to USB-A cable to connect the HyperX Audio Mixer to your computer. The device is plug-and-play, requiring no additional software installation for basic functionality.


Close-up of the USB-C connection between the HyperX Audio Mixer and a laptop, illustrating plug-and-play setup.

2. Connect Microphones:
   • For XLR microphones (e.g., HyperX ProCast), connect using the provided XLR cable to the XLR input port. If your XLR microphone requires phantom power, press the 48V button on the mixer.
   • For 3.5mm microphones, connect to the dedicated 3.5mm microphone input port.


HyperX Audio Mixer connected to an XLR microphone on a boom arm, demonstrating compatibility.

3. Connect Line Input: Connect external audio sources (e.g., smartphone, gaming console) to the 3.5mm stereo line input using a 3.5mm cable.
4. Sambungkeun headphone: Plug your headphones into the 3.5mm headphone output for audio monitoring.

Tukangeun view of the HyperX Audio Mixer, highlighting the 3.5mm Line Input, 3.5mm Microphone Input, and XLR Microphone Input ports.

Parentah Operasi

Daya Hurung/Pareuman

The HyperX Audio Mixer powers on automatically when connected to a computer via USB. Disconnect the USB cable to power off the device.

Nyaluyukeun Tingkat Input

Use the three dedicated faders on the front panel to adjust the input levels for your XLR microphone, 3.5mm microphone, and line input. Monitor the signal and clip indicators to prevent audio distortion.

Ngawas Audio

Adjust your headphone volume using the dedicated knob on the front panel. This allows you to monitor your mixed audio in real-time.

Volume kaluaran

The line output volume knob controls the overall output level sent to your computer or other recording devices.

Mute Functions

Each input channel has a dedicated mute button. Press the button to mute or unmute the corresponding audio source.

Daya Phantom (48V)

If using an XLR condenser microphone that requires external power, press the 48V button to activate phantom power. Ensure your microphone supports 48V phantom power before enabling this feature.

Hands adjusting the faders and knobs on the HyperX Audio Mixer, demonstrating intuitive controls.

Pangropéa

beberesih

To clean the HyperX Audio Mixer, use a soft, dry cloth. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the device.

Panyimpenan

Nalika henteu dianggo, simpen mixer di tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

Pamérésan masalah

• Henteu aya Kaluaran Audio:
  • Pastikeun sadaya kabel parantos disambungkeun kalayan pageuh.
  • Check the fader and volume knob positions; ensure they are not at minimum or muted.
  • Confirm the HyperX Audio Mixer is selected as the default audio input/output device in your computer's sound settings.
• Mikropon Teu Gawé:
  • For XLR microphones, ensure 48V phantom power is enabled if required by your microphone.
  • Check the microphone's connection and ensure its fader is raised.
  • Test with another microphone if possible to rule out microphone issues.
• Audio distort:
  • Reduce the input fader levels to prevent clipping, indicated by the red 'Clip' light.
  • Ensure the microphone is not too close to the sound source, causing overload.
• Alat Teu Kawanoh ku Komputer:
  • Try connecting the mixer to a different USB port on your computer.
  • Balikan deui komputer anjeun.
  • Pastikeun kabel USB teu ruksak.

spésifikasi

Garansi sareng Rojongan

For detailed warranty information, technical assistance, or customer support, please visit the official HyperX website or contact HyperX customer service directly. Keep your proof of purchase for warranty claims.