LODADRA RGB Ceiling Fan Remote Control Instruction Manual

1. Bubuka

This manual provides comprehensive instructions for the safe and effective operation of your LODADRA RGB Ceiling Fan Remote Control. Please read this manual thoroughly before using the product and retain it for future reference. This remote control is designed to operate compatible RGB ceiling fans, managing fan speeds, light functions, and color settings.

2. Émbaran Kasalametan

• Jauhkeun kadali jauh tina cai sareng kalembaban anu luhur.
• Do not expose the remote to direct sunlight or extreme temperatures.
• Do not attempt to disassemble or repair the remote control. This may void the warranty and cause damage.
• Buang batré anu dipaké sacara tanggung jawab nurutkeun peraturan lokal.
• Ensure the remote control is compatible with your specific ceiling fan model before use.

3. Eusi Paket

• 1 x LODADRA RGB Ceiling Fan Remote Control

4. Setélan

4.1 Pamasangan batré

1. Teangan tempat panutup kompartemen batré dina tonggong kadali jauh.
2. Geser panutupna muka.
3. Pasangkeun dua (2) batré AAA, pastikeun polaritasna (+ sareng -) leres.
4. Tutup panutup kompartemen batré aman.

4.2 Nyapasangkeun kadali jauh

This remote control is typically pre-paired with compatible LODADRA RGB ceiling fans. If the remote does not respond to your fan, follow these steps to pair it:

1. Ensure the ceiling fan's main power supply is turned OFF at the wall switch or circuit breaker.
2. Turn the main power supply to the ceiling fan ON.
3. Within 30 seconds of turning on the power, press and hold the 'ALL' button on the remote control for 3-5 seconds.
4. The fan light should blink or the fan should briefly activate, indicating successful pairing.
5. If pairing fails, repeat the steps. Ensure the remote is within range of the fan.

5. Parentah Operasi

Familiarize yourself with the buttons on your remote control. Refer to the image below for button identification and their corresponding functions.

Image 1: LODADRA RGB Ceiling Fan Remote Control. This image displays the white remote control with clearly labeled buttons for fan operation, light control, and timer settings.

5.1 General Power Control

• ALL (Power Button): Press to turn both the fan and light ON or OFF simultaneously.
• ON OFF (Light Button): Press to turn the fan light ON or OFF independently.

5.2 Fan Speed and Direction Control

• FAN ON/OFF (Center Button): Pencét pikeun ngahurungkeun kipas ON atawa OFF.
• Kancing Laju (1-6): Pilih laju kipas anu dipikahoyong tina 1 (panghandapna) dugi ka 6 (pangluhurna).
• Fan Mode/Direction (Wavy Lines Icon): Press to cycle through different fan modes or reverse fan direction (if supported by the fan).

5.3 Control Lampu

• Brightness Control (Sun Icon with Up/Down Arrows): Press the up arrow to increase light brightness, and the down arrow to decrease it.
• Color Temperature Control (K Icon with Up/Down Arrows): Press the up arrow to increase color temperature (cooler white), and the down arrow to decrease it (warmer white).
• RGB Color Control (RGB Icon with Up/Down Arrows): Press the up or down arrow to cycle through various RGB color options or adjust RGB intensity.
• RGB Cycle (RGB Icon with Arrows): Press to activate an automatic RGB color cycling mode.

5.4 Fungsi Timer

• 1H (1 Hour Timer): Press to set the fan and/or light to turn off automatically after 1 hour.
• 4H (4 Hour Timer): Press to set the fan and/or light to turn off automatically after 4 hours.

6. Pangropéa

6.1 beberesih

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.

6.2 Ngagantian batré

If the remote control's range decreases or it becomes unresponsive, replace the batteries. Follow the battery installation steps in Section 4.1.

7. Cara ngungkulan

• Jauh teu ngabales:
  • Check battery polarity and ensure batteries are not depleted. Replace if necessary.
  • Ensure the remote is within effective range of the ceiling fan.
  • Re-pair the remote control with the fan (refer to Section 4.2).
  • Verify the ceiling fan has power.
• Fan or light not turning on:
  • Confirm the main power switch for the fan is ON.
  • Pastikeun jarak jauh dipasangkeun leres.
• Inconsistent light or fan behavior:
  • Interference from other electronic devices might be present. Try operating the remote from a different position.
  • Pasangkeun deui remote-na.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the documentation provided with your LODADRA RGB Ceiling Fan or contact LODADRA customer service directly. Keep your purchase receipt as proof of purchase.