Bubuka
The Schiit Midgard is a versatile headphone ampliifier jeung praamp designed to deliver high-fidelity audio. It features a Halo topology mixed-mode feedback system, providing robust power output for a wide range of headphones. This manual provides essential information for setting up, operating, and maintaining your Midgard unit.
Figure 1: Schiit Midgard Headphone Ampliifier jeung Praamp. This image displays the overall design of the unit, showcasing its matte black finish and compact form factor.
Disetél
1. Ngabongkar jeung Eusi
Carefully remove the Midgard unit from its packaging. Ensure all components are present:
- Schiit Midgard Headphone Ampliifier jeung Praamp
- Kabel Daya
- Manual pangguna (dokumén ieu)
2. Panel hareup Leuwihview
Figure 2: Front Panel. This image highlights the front panel of the Midgard, showing the volume knob, gain switches, and headphone output jacks.
- Saklar Gain: Two switches for adjusting the gain level.
- Jilid Kenop: Controls the output volume for headphones and preamp kaluaran.
- 1/4" TRS Headphone Output: Soket headphone standar.
- 4-pin XLR Headphone Output: Balanced headphone jack for compatible headphones.
3. Sambungan Panel Rear
Figure 3: Rear Panel Connections. This image illustrates the rear panel of the Midgard, detailing the various input and output ports, including balanced XLR and single-ended RCA connections, and the power input.
- Balanced Inputs (XLR): Connect audio sources with balanced XLR outputs.
- Single-Ended Inputs (RCA): Connect audio sources with single-ended RCA outputs.
- Saimbang Praamp Outputs (XLR): Nyambung ka kakuatan amplifiers or active speakers with balanced XLR inputs.
- Single-Ended Preamp Kaluaran (RCA): Nyambung ka kakuatan amplifiers or active speakers with single-ended RCA inputs.
- Input Daya AC: Connect the provided power cable. The unit operates on 115VAC only and is designed for use in the United States, Canada, and Mexico.
4. Connecting Your System
- Ensure the Midgard unit is powered off and unplugged.
- Connect your audio source (e.g., DAC, streamer) to the desired input on the rear panel (Balanced XLR or Single-Ended RCA).
- If using headphones, connect them to either the 1/4" TRS or 4-pin XLR output on the front panel.
- Lamun ngagunakeun preamp function, connect the Balanced XLR or Single-Ended RCA preamp outputs to your power amplifier atawa speaker aktif.
- Connect the power cable to the AC Power Input on the rear panel, then plug it into a 115VAC wall outlet.
Parentah Operasi
1. Powering on / Pareum
To power on the Midgard, ensure all connections are secure, then flip the power switch located on the rear panel. To power off, flip the switch back to the off position.
2. Nyaluyukeun Volume
Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume. Start with the volume at its lowest setting before playing audio to prevent sudden loud sounds.
3. Selecting Gain Level
The Midgard features two gain levels. Use the gain switches on the front panel to select the appropriate gain for your headphones. Lower gain is suitable for sensitive headphones, while higher gain provides more power for less sensitive or high-impedance headphones.
4. Using as a Headphone Amppangagung
Connect your headphones to either the 1/4" TRS or 4-pin XLR output. The Midgard delivers nearly 5W into 32 ohms, providing ample power for most headphones. Ensure your headphones are compatible with the selected output type.
5. Using as a Preamp
The Midgard can also function as a preamp. Connect its balanced or single-ended preamp outputs kana hiji kakuatan amplifier or active speakers. The volume knob controls the output level for both headphones and preamp outputs simultaneously.
Pangropéa
To ensure the longevity and optimal performance of your Schiit Midgard, follow these maintenance guidelines:
- beberesih: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
- Ventilasi: Ensure the unit has adequate ventilation. Do not block the ventilation holes on the top or sides of the chassis.
- Lingkungan: Operate the Midgard in a clean, dry environment, away from direct sunlight, excessive heat, moisture, or dust.
- kakuatan: Always unplug the unit from the power outlet before cleaning or if it will be unused for an extended period.
Pamérésan masalah
If you encounter issues with your Schiit Midgard, refer to the following common troubleshooting steps:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No sound from headphones/preamp kaluaran. |
|
|
| Kualitas sora anu distorsi atanapi goréng. |
|
|
| Unit teu hurung. |
|
|
If the problem persists after trying these steps, please contact Schiit Audio customer support for further assistance.
spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | Midgard |
| Ukuran (L x W x H) | 9 x 6 x 1.5 inci |
| Item Beurat | 3 pon |
| Power Output (into 32 ohms) | Nearly 5W (4.8W specified) |
| Réspon Frékuénsi | 20Hz-20Khz, +/-0.01dB |
| Impedansi | 2 ohm |
| Headphone Jack | 6.35 mm Jack (1/4" TRS), 4-pin XLR |
| Antarmuka Alat Input | Balanced XLR, Single-Ended RCA |
| Output Device Interface | Saimbang XLR Praamp, Single-Ended RCA Preamp |
| Kasaluyuan kakuatan | 115VAC only (USA, Canada, Mexico) |
| Bahan | logam |
| Fitur husus | Halo Topology, Dual Gain Levels, Made in Texas, USA |
Garansi sareng Rojongan
The Schiit Midgard Headphone Ampliifier jeung Praamp comes with a standard manufacturer's warranty. For specific warranty terms, duration, and to register your product, please refer to the official Schiit Audio websitus atanapi ngahubungan rojongan customer maranéhanana langsung.
For technical support, service, or any questions not covered in this manual, please visit the Toko Audio Schiit di Amazon or the official Schiit Audio websitus.
