1. Bubuka
The PAC LPHCH42 Integration T-Harness is designed to simplify the installation of aftermarket audio components in select 2021 non-amplified Chrysler vehicles equipped with the UConnect 5 system. This T-harness provides a plug-and-play solution, allowing for the addition of an amplifier or other audio accessories without cutting or splicing into the factory wiring. It ensures a clean and reversible installation, preserving the integrity of the vehicle's original electrical system.
2. Émbaran Kasalametan
- Salawasna pegatkeun sambungan batré kandaraan sateuacan ngamimitian pamasangan listrik pikeun nyegah korsleting sareng karusakan.
- Pastikeun sadaya sambungan aman sareng diisolasi kalayan leres pikeun nyingkahan bahaya listrik.
- Consult a professional automotive audio installer if you are unsure about any part of the installation process.
- Do not modify the T-harness or any vehicle wiring unless explicitly instructed.
- Verify vehicle compatibility before installation. This harness is specifically for 2021 non-amplified Chrysler vehicles with UConnect 5.
3. Eusi Paket
Verify that all items are present before proceeding with the installation:
- PAC LPHCH42 Integration T-Harness
- Impedance Converter (integrated)
- Pituduh Instalasi (dokumén ieu)
4. Setup jeung Instalasi
The PAC LPHCH42 T-Harness is designed for straightforward plug-and-play installation. Follow these steps carefully:
- Nyiapkeun Kendaraan: Ensure the vehicle is turned off and the negative terminal of the battery is disconnected.
- Aksés Radio Pabrik: Carefully remove the trim panels and fasteners necessary to gain access to the back of the factory radio unit. Refer to your vehicle's service manual for specific instructions on radio removal.
- Cabut Kabel Pabrik: Locate the main wiring harness connected to the back of the factory radio. Disconnect this harness.
- Connect the T-Harness: Connect the male end of the PAC LPHCH42 T-Harness to the factory radio. Connect the female end of the PAC LPHCH42 T-Harness to the vehicle's factory wiring harness that was just disconnected from the radio. The T-harness will now be inline with the factory radio wiring.
- Connect Aftermarket Components: The T-harness provides RCA outputs from the integrated impedance converter for connecting to an aftermarket amplifier. Connect your amplifier's input cables to these RCA outputs. Ensure proper left/right channel connections.
- Wiring Aman: Route and secure all wiring to prevent pinching or interference with moving parts.
- Sambungkeun deui Batré: Sambungkeun deui terminal batré négatip kandaraan urang.
- Sistem tés: Turn on the vehicle and test the functionality of the factory radio and any newly installed aftermarket audio components. Adjust amppangaturan gain lifier sakumaha diperlukeun.
Gambar 1: The PAC LPHCH42 Integration T-Harness, featuring two green multi-pin connectors and an integrated clear impedance converter module. This harness facilitates connecting aftermarket audio equipment to a factory radio without cutting wires.
Klip 1: This video demonstrates the plug-and-play functionality of a car radio system adapter harness, similar to the LPHCH42. It shows how the adapter connects inline with the factory wiring, providing RCA outputs for additional audio components like an amplifier, without requiring wire cutting or splicing.
5. Parentah Operasi
Once installed, the PAC LPHCH42 T-Harness operates passively, providing a low-level audio signal from the factory radio to your aftermarket amplifier via the RCA outputs. The integrated impedance converter ensures proper signal matching for optimal audio quality.
- Sinyal Audio: The harness taps into the speaker-level outputs of the factory radio and converts them to a low-level RCA signal.
- AmpKontrol liifier: Your aftermarket amplifier will receive its audio input from the RCA connections provided by the T-harness. Power and remote turn-on for the amplifier must be wired separately according to the ampparentah lifier urang.
- Kontrol volume: The factory radio's volume control will continue to adjust the overall system volume, including the ampsinyal dipikagaduh.
6. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Modél | LPHCH42 |
| Kasaluyuan | 2021 Non-Amplified Chrysler with UConnect 5 |
| Bahan | Copper wiring |
| Item Beurat | 0.35 Pon (kira-kira 5.6 ons) |
| Tipe Panyambung | 12-pin |
| Ukuran Paket | 8.5 x 8.25 x 1 inci |
7. Cara ngungkulan
- Henteu aya Kaluaran Audio:
- Check all connections to ensure they are secure and fully seated.
- Pariksa éta amplifier is powered on and receiving a remote turn-on signal.
- Konfirmasi dina amplifier's gain settings are not set too low.
- Ensure the factory radio is functioning correctly.
- Audio distort:
- Saluyukeun amplifier's gain settings to prevent clipping.
- Check for proper grounding of the amppangagung.
- Pastikeun teu aya kabel anu pinched atanapi ruksak.
- Audio Intermittent:
- Pariksa sadaya sambungan naha aya anu leupas atanapi korosi.
- Verify the vehicle's battery connections are secure.
8. Pangropéa
The PAC LPHCH42 T-Harness requires minimal maintenance. Periodically inspect all connections to ensure they remain secure and free from corrosion. Keep the harness free from excessive moisture and extreme temperatures to ensure long-term reliability.
9. Garansi jeung Rojongan
For specific warranty information and technical support regarding your PAC LPHCH42 Integration T-Harness, please refer to the manufacturer's official websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen bukti pameseran anjeun pikeun klaim garansi.
