1. Bubuka
Thank you for choosing the Rebel POWER-1000 Pure Sine Wave UPS Inverter. This device is designed to provide stable and safe emergency power for various applications, including central heating furnaces, heat pumps, refrigerators, and other RTV/AGD systems. It features a pure sine wave output, ensuring compatibility with sensitive electronic and inductive loads, and offers three operating modes: emergency power supply (UPS), rectifier (charger), and inverter.
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your POWER-1000 inverter. Please read it thoroughly before use and retain it for future reference.
2. Parentah Kasalametan
Salawasna merhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:
- Kasalametan listrik: Ensure the device is connected to a properly grounded power outlet. Do not open the casing; teu aya bagian anu tiasa diservis ku pangguna di jerona. Serahkan sadaya perawatan ka tanaga anu mumpuni.
- Sambungan batré: Connect the battery with correct polarity (red to positive, black to negative). Incorrect connection can cause severe damage to the inverter and battery. Use a 12V DC battery with a capacity between 50-200 Ah (55 Ah suggested).
- Ventilasi: Ensure adequate ventilation around the unit. Do not block the fan or ventilation openings. Overheating can lead to device malfunction or damage.
- Lingkungan: Operate the device within the specified temperature range of 0 - 40°C and humidity of 10 - 90%. Avoid direct sunlight, moisture, dust, and corrosive environments.
- Perlindungan Overload: Do not exceed the rated power of 700 W. The device is equipped with overload protection, but continuous overloading can shorten its lifespan.
- Kontak cair: Keep the device away from liquids. In case of accidental liquid contact, immediately disconnect power and consult a service technician.
- Barudak jeung Pets: Jauhkeun alat tina jangkauan barudak sareng piaraan.
3. Komponén produk
Familiarize yourself with the main components of your Rebel POWER-1000 UPS Inverter:
Gambar 3.1: Panel hareup
This image displays the front of the Rebel POWER-1000 inverter, featuring the LED display which shows operational status, battery charge, and load level. Below the display is the main ON/OFF switch.
Gambar 3.2: Panel Tukang di Luhurview
This image shows the rear panel of the inverter. Visible components include the cooling fan, circuit breaker, two output sockets, battery connection terminals (red and black cables), and the AC input socket.
Figure 3.3: Rear Panel Connections Detail
A ngadeukeutan view of the rear panel, highlighting the 'OUTPUT' sockets for connecting appliances, the 'BATTERY +12V' terminals for external battery connection, the 'AC INPUT 230V' for mains power, and the 'CIRCUIT BREAKER' for protection.
Komponén konci:
- Témbong LED: Provides real-time information on operating status, battery charge level, and load level.
- Main ON/OFF Switch: Controls the power to the inverter.
- Sockets kaluaran AC: Two 230V AC sockets for connecting your devices.
- Battery Terminals (12V DC): Connect to an external 12V DC battery. Ensure correct polarity.
- Input AC (230V): Connects the inverter to the mains power supply for charging the battery and providing power in UPS mode.
- Kipas pendingin: Dissipates heat generated during operation.
- Pamutus Sirkuit: Provides protection against overcurrent.
4. Setélan
Follow these steps to set up your Rebel POWER-1000 UPS Inverter:
- Ngabongkar bungkusan: Carefully remove the inverter from its packaging. Inspect for any signs of damage.
- panempatan: Place the inverter on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient space around the unit for airflow.
- Sambungan batré:
- Pastikeun inverter dina kaayaan OFF.
- Nyambungkeun beureum kabel batré ka positip (+) terminal of your 12V DC battery.
- Nyambungkeun hideung kabel batré ka négatip (-) terminal of your 12V DC battery.
- Tighten all connections securely to prevent arcing.
- Sambungan AC: Plug the inverter's AC input cable into a standard 230V AC wall outlet.
- Sambungan Alat: Plug the devices you wish to power into the 230V AC output sockets on the rear of the inverter. Ensure the total power consumption of connected devices does not exceed 700 W.
5. Parentah Operasi
The Rebel POWER-1000 operates in three main modes:
- UPS Mode (Emergency Power Supply): When connected to mains power, the inverter charges the external battery and simultaneously supplies power to connected devices. In case of a power outage, it automatically switches to battery power within <4 ms, providing uninterrupted power.
- Rectifier Mode (Battery Charger): When connected to mains power without any load, the inverter functions as a battery charger, replenishing the external battery.
- Modeu Inverter: When not connected to mains power, the inverter converts 12V DC battery power into 230V AC pure sine wave power for your connected devices.
Ngamimitian Inverter:
- Ensure all connections (battery, AC input, loads) are secure.
- Press the main ON/OFF switch on the front panel. The LED display will illuminate, indicating the current operating status, battery charge, and load level.
- The inverter will automatically select the appropriate operating mode based on the presence of mains power and connected loads.
Émbaran tampilan LED:
The clear LED display provides crucial information:
- Masukan Voltage: Shows the incoming AC voltage tina listrik utama.
- Kaluaran Voltage: Displays the 230V AC output voltage.
- Batré Voltage: Nunjukkeun vol ayeunatage tina batré 12V anu disambungkeun.
- Tingkat beban: Némbongkeun persentage of the inverter's capacity being used by connected devices.
- Status Operasi: Icons or indicators for mains power, battery power, charging, and fault conditions.
6. Pangropéa
Regular maintenance ensures optimal performance and longevity of your inverter:
- beberesih: Periodically clean the exterior of the inverter with a soft, dry cloth. Ensure the cooling fan and ventilation openings are free from dust and debris. Do not use liquid cleaners.
- Pamariksaan batré: Regularly check battery terminals for corrosion and ensure connections are tight. If using a lead-acid battery, check electrolyte levels if applicable and top up with distilled water as needed (refer to battery manufacturer's instructions).
- Ventilasi: Always ensure the inverter has adequate ventilation. Do not place objects on top of the unit or block its air vents.
- Panyimpenan: If storing the inverter for an extended period, disconnect it from both mains power and the battery. Store in a cool, dry place. For optimal battery health, fully charge the battery before storage and recharge it every 3-6 months.
7. Cara ngungkulan
If you encounter issues with your Rebel POWER-1000, refer to the following table:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Inverter henteu hurung | No battery connected or battery discharged; Main switch off; Blown circuit breaker. | Connect a charged battery; Turn on the main switch; Check and reset the circuit breaker on the rear panel. |
| Taya kaluaran AC | Overload; Short circuit; Battery low; Inverter fault. | Reduce connected load; Check for short circuits in connected devices; Recharge or replace battery; If problem persists, contact support. |
| Batré teu ngecas | AC input not connected; AC input voltage too low/high; Battery fault. | Ensure AC input cable is securely plugged in; Check mains voltage; Test battery or replace if faulty. |
| Peringatan kaleuwihan beban dina tampilan | Total power of connected devices exceeds 700 W. | Disconnect some devices to reduce the load below 700 W. |
| Unit is unusually hot | Blocked ventilation; Excessive load; High ambient temperature. | Ensure vents are clear; Reduce load; Move unit to a cooler environment. |
If the problem persists after attempting these solutions, please contact Rebel customer support or your retailer.
8. Spésifikasi
Technical specifications for the Rebel POWER-1000 UPS Inverter (Model RB-4003):
| Fitur | Spésifikasi |
|---|---|
| Dipeunteun Power | 700 W (1000 VA) |
| Jenis Batré | 12 V DC |
| Vol Batré Maxtage | 15 V DC |
| Masukan Voltage Rentang | 190 - 260 V AC |
| Frékuénsi Input | 45 - 60 Hz |
| Kaluaran Voltage (AC) | 230 V AC +/-5% (Inverter: 230 V AC +/-3%) |
| Frékuénsi Kaluaran | 50/60 Hz +/-0.5 Hz |
| Bentuk gelombang kaluaran | Galura murni |
| Efisiensi Kaluaran | >= 85% (DC to AC) |
| Batré Ngecas Ayeuna | Max. 10 A |
| Disarankeun Kapasitas Batré | 50-200 Ah (suggested: 55 Ah) |
| Diperkirakeun Waktos Ngecas | 4-14 hours (dependent on battery capacity) |
| Ngalihkeun Waktos | =<4 ms |
| Protéksi | Overload, Short Circuit, Over/Under Voltage |
| Suhu Operasi | 0 - 40°C |
| Kalembaban Operasi | 10 - 90% |
| Ukuran (L x W x H) | 336 x 143 x 178 mm |
| Beurat | 4.3 kg |
9. Garansi jeung Rojongan
The Rebel POWER-1000 UPS Inverter is manufactured by Rebel. For warranty information, please refer to the warranty card included with your product or consult the retailer from whom you purchased the device. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact your local Rebel distributor or the point of purchase. Ensure you have your product model (RB-4003) and serial number (if applicable) ready when contacting support.
