GeekTale K13 Fingerprint Smart Door Knob

Bubuka

This manual provides detailed instructions for the installation, setup, and operation of your GeekTale K13 Fingerprint Smart Door Knob. This smart lock offers multiple access methods including fingerprint, Bluetooth app control, and traditional keys, enhancing security and convenience for your home or office.

Image: The GeekTale K13 Smart Door Knob illustrating its three primary unlock methods: fingerprint recognition, Bluetooth app control, and traditional physical key access.

Naon Kaasup

Please verify that all components are present in your package before beginning installation:

• 1 x Exterior Knob
• 1 x Interior Knob
• 1 x Single Latch
• 1 x Strike Parts (Strike Plate)
• 4 x Sekrup A
• 2 x Screws B
• 2 x konci
• 1 x Manual Pamaké
• 1 x Kartu Garansi

Image: An exploded diagram detailing all parts included in the GeekTale K13 Smart Door Knob package, such as the exterior knob, interior knob, latch, strike plate, screws, and keys.

Guide instalasi

Follow these steps carefully to install your GeekTale K13 Smart Door Knob. A screwdriver is required for installation.

1. Nyiapkeun lawang: Ensure all previous locks are removed from the door.
2. Pasang Latch: Insert the single latch into the edge of the door. Secure it with 2 x Screw A. Ensure the latch is firmly in place.
3. Position Exterior Knob: Separate the door knob assembly. Take the Exterior Knob and place it through the door and latch on the exterior side. Feed the small wire and connector through the opening on top of the latch cavity.
4. Connect Interior Knob: Take the Interior Knob and feed its wire through to the internal side of the door. Join the two wires by pushing the connectors together.
5. Align and Secure Knobs: Line up both the interior and exterior knobs through the door cavity and push them together.
6. Fasten Knobs: Remove the end cap on the Interior Knob. Line up both the interior and exterior knobs and screw them together using the 2 x Screw B provided. Replace the end cap.
7. Selapkeun Batré: Insert 4 x AAA alkaline batteries into the Interior Knob as specified by the + and - symbols. Replace the end cap on the Interior Knob.

App Setup & Fingerprint Enrollment

To unlock the full potential of your smart door knob, download and set up the Geek Smart App.

App Download & Activation:

1. Unduh Aplikasi: Scan the QR code provided in the product packaging or search for "GeekSmart" in the Google Play Store (Android) or iPhone App Store (iOS).
2. Ngadaptar & Login: Register and log in using your E-mail address.
3. Tambahkeun Alat: Tap the "Add Device" button in the app interface. Select the K01 model from the list of hot products.
4. Connect Lock: The app will display nearby door locks. Select your lock to complete the pairing process.

Nambahkeun sidik:

1. In the app, click on "Member Management".
2. Click on "Me" (or the user you wish to add a fingerprint for).
3. Follow the on-screen instructions to place your finger on the fingerprint recognition area of the knob. You will need to repeat this procedure multiple times (typically 6 times) to ensure a complete scan for enhanced security.
4. Once completed, you can name the fingerprint for easy identification. Fingerprints can be deleted at a later date if needed.

Image: The GeekTale K13 Smart Door Knob highlighting its rapid fingerprint recognition, capable of unlocking in 0.3 seconds and storing up to 20 unique fingerprints.

Modeu Operasi

The GeekTale K13 Smart Door Knob features three distinct operating modes, which can be easily switched using a button on the interior knob:

• Modeu Konci Otomatis: Turn the button to the middle position. The door will automatically lock after 5 seconds.
• Mode Passage: Turn the button to the left. The door remains unlocked, allowing free entry and exit.
• Modeu Kaamanan: Turn the button to the right. Only the administrator's fingerprint, app control, or physical keys can unlock the door.

Image: A visual guide demonstrating how to switch between Auto Lock, Passage, and Security modes by rotating the button on the interior side of the GeekTale K13 Smart Door Knob.

Émbaran batré

Your GeekTale K13 Smart Door Knob is powered by 4 x AAA alkaline batteries, providing long-lasting performance.

• Jenis Batré: 4 x AAA Alkaline Batteries (not included).
• Kahirupan batré: Up to 8 months on a single charge (based on typical usage).
• Ngecas: The lock features a built-in 450mAh rechargeable battery. It takes approximately 3 hours for a full charge via the Type-C charging port. Please fully charge the lock before first use. Make sure to use a USB-A to Type-C cord to charge (cord is not included).
• Waspada Batré Lemah: The lock will provide an alert when battery levels are low, prompting you to replace or recharge the batteries.

Image: The interior side of the GeekTale K13 Smart Door Knob, illustrating the Type-C charging port and indicating the 450mAh rechargeable battery with a 3-hour full charge time.

Spésifikasi produk

Pamérésan masalah

If you encounter any issues with your GeekTale K13 Smart Door Knob, please refer to the following common solutions:

• Sidik ramo Teu Dipikawanoh: Ensure your finger is clean and dry. Try re-enrolling your fingerprint in the app. Ensure the fingerprint sensor is clean.
• Masalah Konektipitas Aplikasi: Make sure Bluetooth is enabled on your smartphone and the lock is within range. Restart the app or your phone.
• Konci Teu Ngabales: Check the battery level. Replace or recharge batteries if low. Use the physical key for emergency access.
• Incorrect Mode: Verify the operating mode switch on the interior knob is set correctly (Auto Lock, Passage, or Security).
• Konci Fisik Teu Gawé: Ensure you are using the correct key and inserting it fully.

For further assistance, please consult the detailed troubleshooting section in the full user manual or contact customer support.

Garansi & Rojongan

Your GeekTale K13 Smart Door Knob comes with a manufacturer's warranty. Please refer to the included warranty card for details on coverage and how to register your product.

For technical support, product inquiries, or warranty claims, please use the contact information provided on your warranty card or scan the QR codes for direct access to support resources and additional helpful videos.

Image: A GeekTale warranty card displaying QR codes for easy access to product support and registration.