1. Bubuka
The Total Rotary Hammer TH1153256 is engineered for demanding drilling and demolition tasks. Its robust design and powerful motor make it suitable for various applications in concrete, steel, and wood. This manual provides essential information for safe operation, proper setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
The SDS plus chuck system facilitates quick and secure bit changes without the need for additional tools. The package includes a selection of three drill bits and two chisels, along with an additional set of carbon brushes to extend the tool's operational life. The unit is supplied in a durable BMC (Blow Molded Case) for convenient storage and transport.
2. Parentah Kasalametan
Always adhere to fundamental safety precautions when operating power tools to minimize the risk of electric shock, fire, and serious injury. Retain these instructions for future reference.
- Kasalametan Area Gawé: Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Hindarkeun kontak awak sareng permukaan bumi atanapi bumi, sapertos pipa, radiator, rentang, sareng kulkas.
- Kasalametan Pribadi: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts.
- Pamakéan sareng Perawatan Alat: Ulah maksakeun pakakas listrik. Anggo pakakas anu pas pikeun aplikasi anjeun. Cabut colokan tina sumber listrik sateuacan ngalakukeun pangaluyuan, ngaganti asesoris, atanapi nyimpen pakakas listrik.
- Pangropéa: Ngajaga alat listrik. Pariksa misalignment atanapi mengikat bagian anu ngalir, ngarusak bagian, sareng kaayaan naon waé anu tiasa mangaruhan operasi alat listrik.
3. Produk Langkungview
Familiarize yourself with the components of your Total Rotary Hammer TH1153256 before operation.
Figure 1: Total Rotary Hammer TH1153256, auxiliary handle, and carrying case. The tool features a blue and black body with red accents, indicating a robust design.
Komponén konci:
- SDS Plus Chuck: For quick and secure insertion of drill bits and chisels.
- Saklar Pamilih Mode: Ngidinan pilihan antara pangeboran, pangeboran palu, sareng modeu chiseling.
- Saklar pemicu: Aktipkeun alat.
- Tombol konci: For continuous operation (use with caution).
- Gagang bantu: Nyadiakeun Pakem tambahan sarta kontrol salila operasi.
- Depth Gauge: Pikeun kontrol jero pangeboran tepat.
- Bukaan ventilasi: Ensure proper motor cooling.
4. Setélan
4.1 Ngagantelkeun gagang bantu
- Leupaskeun gagang bantu ku cara ngabengkokkeun lawan jarum jam.
- Geser gagangna kana laras alat ka posisi anu dipikahoyong.
- Kencangkeun gagangna ku cara dipulas saarah jarum jam nepi ka aman.
4.2 Installing/Removing SDS Plus Bits
- Pastikeun alat dicabut tina sumber listrik.
- Ngabersihan shank tina bit bor atawa pahat.
- Insert the bit into the SDS plus chuck, pushing and twisting until it clicks into place. Pull on the bit to ensure it is securely locked.
- Pikeun nyabut, tarik deui leungeun baju cuk tur tarik bit kaluar.
4.3 Nyetel Depth Gauge
- Selapkeun gauge jero kana liang dina cecekelan bantu.
- Atur gauge kana jerona pangeboran anu dipikahoyong.
- Tighten cecekelan bantu pikeun ngamankeun gauge jero.
5. Parentah Operasi
5.1 Milih Modeu Operasi
Rotate the mode selector switch to choose the appropriate function:
- Mode pangeboran: For drilling in wood, metal, and plastic (without hammer action).
- Modeu pangeboran palu: For drilling in concrete, masonry, and stone (with rotation and hammer action).
- Modeu Pahat: For light demolition work, chiseling, and breaking (hammer action only, no rotation).
5.2 Mimitian jeung Ngeureunkeun
- Colokkeun alat kana stop kontak listrik anu cocog.
- To start, press the trigger switch.
- Pikeun operasi anu terus-terusan, pencét tombol konci bari picuna dipencet. Pikeun ngaleupaskeun, pencét deui picuna.
- Pikeun eureun, leupaskeun saklar pemicu.
5.3 Tip Operasi Umum
- Larapkeun ajeg, malah tekanan. Ulah maksakeun alat.
- Allow the tool to reach full speed before engaging the workpiece.
- Pikeun liang jero, périodik mundur bit pikeun mupus lebu.
- Always hold the tool firmly with both hands, especially during hammer drilling or chiseling.
6. Pangropéa
Regular maintenance ensures the longevity and safe operation of your rotary hammer.
- beberesih: After each use, clean the tool's exterior with a soft cloth. Keep ventilation openings clear of dust and debris.
- Pangropéa Chuck: Periodically clean and lightly lubricate the SDS plus chuck to ensure smooth bit changes.
- Sikat Karbon: The tool includes an additional set of carbon brushes. Replace carbon brushes when they are worn down to approximately 1/4 inch (6mm) or if the motor sparks excessively or loses power. Refer to a qualified service technician for brush replacement if you are unsure.
- Panyimpenan: Store the tool in its BMC case in a dry, secure location, out of reach of children.
7. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tingali.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu ngamimitian. | No power supply; faulty power cord; worn carbon brushes. | Check power connection; inspect power cord for damage; replace carbon brushes. |
| Reduced power or excessive sparking. | Worn carbon brushes; motor overload. | Replace carbon brushes; reduce load and allow tool to cool. |
| Bit not locking in chuck. | Chuck is dirty; bit shank is damaged; chuck mechanism is faulty. | Clean chuck and bit shank; use a new bit; consult service center. |
| Geter kaleuleuwihi. | Damaged bit; internal component issue. | Replace bit; discontinue use and consult service center. |
If you encounter problems not listed here or if solutions do not resolve the issue, contact an authorized service center.
8. Spésifikasi
Technical data for the Total Rotary Hammer TH1153256:
- model: TH1153256
- Voltage: 220-240V~50/60Hz
- Daya Input: 1500W
- Laju tanpa beban: 950 rpm
- Laju Dampak: 4500 bpm
- Énergi Dampak: 5.5 Joule
- Max. Drilling Capacity (Concrete): 32 mm
- Max. Drilling Capacity (Steel): 13 mm
- Max. Drilling Capacity (Wood): 40 mm
- Jenis cuk: SDS Plus
- Beurat barang: 7.5 kg
- Ukuran produk: 30 x 10 x 20 cm
- Bahan: logam
- warna: Biru/Hideung
- Fitur husus: Tool-free bit change, Heavy-duty design
- Komponén Kaasup: 1 x Total Rotary Hammer TH1153256, 3 Drill Bits, 2 Chisels, 1 Set Carbon Brushes, BMC Case
- Batré diperlukeun: No
- Negara asal: Cina
9. Garansi jeung Rojongan
This Total Rotary Hammer TH1153256 is manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. Keep your purchase receipt as proof of purchase.
For technical assistance, spare parts, or service inquiries, please contact the authorized Total service center in your region. Always use genuine Total replacement parts to maintain product integrity and warranty validity.
