Buku Panduan Pangguna Gergaji Rantai Litium-Ion 12 Inci Total TGSLI201286 900W

1. Bubuka

The Total TGSLI201286 900W Lithium-Ion Chain Saw is a powerful and efficient tool designed for various cutting tasks. This cordless chain saw features a brushless motor, a 12-inch chain bar, and is powered by two 20V 4.0Ah lithium-ion batteries. It includes a quick charger for convenience. Key safety features such as a quick brake function and automatic lubrication are integrated to enhance user protection and tool longevity. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your chain saw.

Gambar 1: Leuwihview of the Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw.

2. Parentah Kasalametan

Salawasna perhatikeun tindakan pencegahan kaamanan dasar pikeun ngirangan résiko kahuruan, sengatan listrik, sareng tatu pribadi nalika ngoperasikeun alat-alat listrik. Baca sareng pahami sadaya pitunjuk sateuacan dianggo.

• Alat Pelindung Diri (APD): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. A hard hat and leg protection are also recommended.
• Kasalametan Area Gawé: Keep the work area clean and well-lit. Do not operate the chain saw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Kasalametan listrik: Hindarkeun kontak awak sareng permukaan bumi atanapi grounded. Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh.
• Chain Saw Grip: Always hold the chain saw firmly with both hands when operating. Ensure a secure grip on both the front handle and the rear handle.
• Pencegahan Kickback: Be aware of the risk of kickback. Avoid the guide bar tip contacting any object. Use caution when re-entering a cut.
• Kasalametan batré: Use only the specified battery packs and charger. Do not short-circuit, disassemble, or expose batteries to high temperatures or fire.
• Pangropéa: Disconnect the battery pack before making any adjustments, changing accessories, or storing the chain saw.
• Barudak sareng Panyusun: Jaga murangkalih sareng jalma anu aya dina jarak anu aman ti tempat damel.

3. Komponén jeung Fitur

The Total TGSLI201286 chain saw is equipped with several features designed for performance and safety.

• Motor Brushless: Provides improved performance, efficiency, and extended tool life compared to brushed motors.
• 12-Inch Chain Bar and Chain: A robust cutting system suitable for various tree maintenance and wood cutting tasks.
• 20V 4.0Ah Lithium-Ion Batteries (x2): Two high-capacity batteries provide extended runtime and consistent power.
• Charger gancang: Designed to rapidly charge the lithium-ion batteries, minimizing downtime.
• Quick Brake Function: Enhances safety by rapidly stopping the chain in the event of kickback or when the trigger is released.
• Sistem Pelumasan Otomatis: Ensures continuous lubrication of the chain and guide bar during operation, reducing wear and friction.
• Desain ergonomis: Features comfortable handles for improved control and reduced operator fatigue.

4. Setélan

4.1 Ngeusi batre

Before first use, fully charge both 20V 4.0Ah lithium-ion batteries using the provided quick charger.

1. Selapkeun pak batré kana carjer. Pastikeun éta ngaklik kana tempatna.
2. Plug the charger into a standard 220-240V/50/60Hz power outlet.
3. The charger indicator light will show the charging status. Refer to the charger manual for specific light patterns.
4. Sakali dicas pinuh, cabut pak batré tina carjer.

Figure 2: The 20V 4.0Ah Lithium-Ion batteries and quick charger included with the chain saw.

4.2 Masang Palang jeung Ranté Panduan

Ensure the battery is removed before performing any assembly.

1. Remove the chain cover by loosening the retaining nuts.
2. Place the chain around the drive sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the chain or guide bar).
3. Position the guide bar studs through the holes in the guide bar.
4. Replace the chain cover and hand-tighten the retaining nuts. Do not fully tighten yet.

angka 3: Tutup-up view of the 12-inch guide bar and chain assembly.

4.3 Nyaluyukeun tegangan ranté

Tegangan ranté anu leres penting pisan pikeun operasi anu aman sareng efisien.

1. With the chain cover retaining nuts slightly loose, use the chain tensioning screw (often a red dial or screw on the side) to adjust the chain tension.
2. The chain should be snug against the guide bar, but still able to be pulled freely by hand. There should be no sag on the underside of the guide bar.
3. Once the tension is correct, fully tighten the chain cover retaining nuts.

Figure 4: Detail of the chain tension adjustment mechanism on the chain saw.

4.4 Ngeusian Waduk Minyak Ranté

The automatic lubrication system requires chain oil for proper function.

1. Locate the oil filler cap on the chain saw body.
2. Unscrew the cap and fill the reservoir with appropriate chain and bar oil. Do not use motor oil or waste oil.
3. Ganti tutupna aman.

5. Parentah Operasi

5.1 Daptar pariksa Pra-Operasi

• Pastikeun sadaya gear kaamanan dipaké.
• Pariksa tegangan ranté.
• Verify chain oil reservoir is full.
• Inspect the chain for sharpness and damage.
• Pastikeun daérah damel bébas tina halangan sareng jalma anu aya di sakitar.
• Insert a fully charged battery pack into the chain saw.

5.2 Starting the Chain Saw

1. Tahan ragaji ranté pageuh ku dua leungeun.
2. Engage the safety lock-off button (if present).
3. Press the trigger switch to start the motor. The chain will begin to move.

5.3 Cutting Techniques (Basic)

• Ngajaga kasaimbangan: Always stand with a firm footing and maintain good balance.
• Clearance: Ensure the area around the cutting path is clear.
• Sudut motong: Approach the material at an appropriate angle, allowing the chain to do the work. Do not force the saw.
• Hindarkeun Kickback: Be extremely cautious of the guide bar tip. Never cut with the tip of the guide bar.
• Limbing: When limbing, work from the bottom up to avoid pinching the guide bar.

5.4 Stopping the Chain Saw

Release the trigger switch. The quick brake function will rapidly stop the chain. For extended breaks or when moving between work areas, remove the battery pack.

6. Pangropéa

Regular maintenance ensures the longevity and safe operation of your chain saw. Always remove the battery pack before performing any maintenance.

6.1 Cleaning the Chain Saw

• After each use, clean sawdust, chips, and debris from the chain saw body, guide bar, and chain.
• Use a brush or compressed air. Avoid using water directly on electrical components.

6.2 Asah ranté

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain manufacturer's instructions for proper sharpening techniques and file ukuran.

6.3 Guide Bar Pangropéa

• Bersihkeun alur palang pituduh pikeun miceun serbuk gergaji sareng runtah.
• Balikkeun périodik bar pituduh pikeun mastikeun ngagem.
• Pariksa bilah pituduh naha aya gerinda atanapi karusakan. File down any burrs.

6.4 Kamanusaan sarta Studi Batré

• Simpen batré di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ulah nyimpen batré anu pinuh ku daya dina jangka waktu anu lila. Cas sacara berkala.
• Remove batteries from the chain saw when not in use.

6.5 Chain Oil Management

Regularly check the chain oil level and refill as needed. Use only recommended chain and bar oil.

7. Cara ngungkulan

This section addresses common issues you might encounter with your chain saw.

8. Spésifikasi

Technical specifications for the Total TGSLI201286 900W Lithium-Ion Chain Saw.

9. Garansi jeung Rojongan

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact Total Inc. customer service through their official websitus atawa wincik kontak disadiakeun dina bungkusan produk Anjeun.