Bubuka
The Total Auto Darkening Welding Helmet TSP9103 is designed to provide superior eye and face protection during welding operations. Featuring advanced auto-darkening technology, it ensures optimal visibility and safety for various welding tasks. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your welding helmet.
Émbaran Kasalametan
Always prioritize safety when using welding equipment. Failure to follow these safety guidelines may result in serious injury or damage to the helmet.
- Perlindungan panon: This helmet provides UV/IR protection up to DIN 16, even in the light state. However, always ensure the auto-darkening function is working correctly before starting any welding.
- Ventilasi: Ensure adequate ventilation in your work area to avoid inhaling welding fumes.
- Kasalametan listrik: Do not use the helmet if it is damaged or if any electrical components are exposed.
- Rentang Suhu: Operate the helmet within the specified temperature range of -5°C to +55°C.
- beberesih: Use only recommended cleaning methods and materials to avoid damaging the lens or sensors.
- Kasalametan batré: Ensure correct battery polarity when installing. Replace batteries promptly when the low battery indicator appears.
Produk Leuwihview
The TSP9103 welding helmet is designed for professional and DIY welding applications, offering advanced features for enhanced performance and user comfort.
- Optical Classification: 1/1/1/1 for superior clarity.
- Gede ViewWewengkon: 100 x 67 mm for an expansive field of view.
- Sénsor: Equipped with 4 sensors for reliable arc detection.
- Kontrol sahadé: Stepless adjustment from DIN 5-9/9-13 (dark state) and DIN 3 (light state).
- Waktos Ngalihkeun gancang: 0.04 ms from light to dark.
- Bahan: Constructed from durable nylon.
Gambar 1: Hareupeun view of the Total Auto Darkening Welding Helmet TSP9103. This image shows the helmet's overall design, including the auto-darkening filter and the adjustable headgear.
Gambar 2: Detil view highlighting key features of the TSP9103 helmet. This image illustrates the large 100x67mm viewing area, 180° full view window, ON/OFF auto power, grind function, HD vision, and low battery indicator.
Disetél
- Ngabongkar bungkusan: Carefully remove the welding helmet and all accessories from the packaging. Inspect for any signs of damage.
- Pamasangan batré: The helmet is battery-powered. Locate the battery compartment (usually on the inside of the helmet or the auto-darkening filter cartridge). Insert the required batteries, ensuring correct polarity. (Catetan: Batré henteu kalebet kana produk.)
- Pangaluyuan Topi:
- Adjust the top strap to fit the crown of your head comfortably.
- Rotate the knob at the back of the headgear to tighten or loosen the fit around your head.
- Adjust the distance between the helmet and your face, and the angle of the helmet, using the side pivots. Ensure the viewing area is centered with your eyes.
- Pariksa Pra-Operasi: Before welding, perform a quick test. Hold the helmet up to a bright light source (not direct sunlight or a welding arc) and briefly press the test button (if available) or quickly flash a light at the sensors. The lens should darken instantly.
Parentah Operasi
- Hurungkeun/Pareuman: The helmet features an automatic power-on/off function. It will activate when exposed to light and deactivate after a period of inactivity.
- Penyesuaian nuansa:
- Locate the shade control knob on the side or inside of the helmet.
- Rotate the knob to select the desired shade level (DIN 5-9 or DIN 9-13) based on your welding process and amperage. Refer to standard welding shade charts for guidance.
- Kontrol sensitipitas:
- Adjust the sensitivity knob to control how easily the filter reacts to the welding arc. Higher sensitivity is suitable for low amperage welding or when the arc is partially obstructed.
- Adjust sensitivity to avoid false triggering from ambient light or adjacent welding arcs.
- Kontrol reureuh:
- The delay control knob determines how long the filter remains dark after the welding arc stops.
- A shorter delay is suitable for tack welding, while a longer delay helps protect eyes from afterglow or sparks during high amplas erage.
- Grind Function: If your helmet has a grind mode, activate it when grinding. This mode disables the auto-darkening function, allowing you to use the helmet as a face shield without the lens darkening. Remember to switch back to welding mode before striking an arc.
Pangropéa
- Ngabersihan lensa:
- Regularly clean the outer and inner protective lenses with a soft, clean cloth and a mild cleaning solution.
- Ulah nganggo pembersih atanapi pelarut anu abrasif, sabab éta tiasa ngaruksak lapisan lénsa.
- Ngagantian batré: When the low battery indicator illuminates, replace the batteries immediately. Refer to the battery compartment for the correct battery type (e.g., CR2032).
- Sensor beberesih: Keep the sensors on the front of the helmet clean and free from debris to ensure proper auto-darkening function.
- Panyimpenan: Store the helmet in a clean, dry place away from direct sunlight and extreme temperatures.
- Pamariksaan: Periodically inspect the helmet for cracks, damage to the headgear, or loose parts. Replace any damaged components before use.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lénsa henteu poék nalika aya lengkungan. |
|
|
| Lens flickers or darkens intermittently. |
|
|
| Visibilitas anu goréng ngaliwatan lénsa. |
|
|
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | TSP9103 |
| Kelas optik | 1/1/1/1 |
| Viewwewengkon | 100 x 67 mm |
| Sénsor Arc | 4 |
| Nagara Lampu | DIN 3 |
| Nagara poék | DIN 5-9 / 9-13 (Stepless Adjustment) |
| Perlindungan UV/IR | Nepi ka DIN 16 |
| Switching Time (Light to Dark) | 0.04 ms |
| Kontrol reureuh | Bisa diatur |
| Kontrol sensitipitas | Bisa diatur |
| Bahan | Nilon |
| Beurat | Kira-kira. 560 g |
| Suhu Operasi | -5°C nepi ka +55°C |
| Sumber Daya | Batré Powered (Aki teu kaasup) |
Garansi kawates
Total Inc. warrants this product against defects in materials and workmanship for a period specified at the time of purchase. This warranty does not cover damage due to misuse, abuse, normal wear and tear, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Rojongan Palanggan
For technical assistance, warranty inquiries, or replacement parts, please contact Total Inc. customer support. Visit the official Total websitus kanggo inpormasi kontak sareng patarosan anu sering ditaroskeun.
Websitus: www.totaltools.com (Kelample link, link sabenerna bisa rupa-rupa)
