Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Bubuka

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Kaasup dina Box:

2. Setup jeung Connection

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Léngkah Sambungan:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Pastikeun sadaya sambungan aman.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Gambar 2: Kelample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Gambar 3: Kelample of connecting the charger to a motorcycle battery.

3. Parentah Operasi

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Pencét éta MODÉ button to cycle through the available charging programs:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Stage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Pariksa batré: Assesses the battery's initial status and voltage.
  2. Désulfasi: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Analisis: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. Voltage Kontrol: Monitors the battery's charge status to ensure optimal voltage tingkatan.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Diagram anu ngagambarkeun 8-stage charging process of the ANSMANN charger

Gambar 4: Gambaran visual tina 8-stage automatic charging process.

4. Pangropéa

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Fitur kaamanan:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Masalah umum sareng Solusi:

6. Spésifikasi

FiturSpésifikasi
Nomer modél1001-0143
Masukan VoltageAC 100-240V, 50/60Hz
Kaluaran Voltage6V / 12V (DC)
Ngecas Ayeuna1A / 2A (selectable)
Kapasitas batré4 Ah - 60 Ah
Jinis batréLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Pengisian Stages8-Stage Otomatis
Peunteun panyalindunganIP65 (Dust and Splash Water Protected)
Dimensi produk7.09 x 3.11 x 1.93 inci (180 x 79 x 49 mm)
Item Beurat1.03 pon (0.47 kg)

7. Garansi

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3-taun jaminan produsén urang from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Rojongan

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN websitus atawa ngaliwatan pangecér Anjeun.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Dokumén Patali - 1001-0143

Praview ANSMANN SM 6-12V / 6A Inteligentní nabíječka autobaterií Návod in obsluze
Návod k obsluze pro inteligentní nabíječku autobaterií ANSMANN BC 6-12V / 6A. Pokrývá nabíjecí programy, připojení, bezpečnostní pokyny, řešení problémů a technické specifikace pro 6V a 12V olověné, AGM, gelové a 12V LiFePO4 baterie.
Praview Bedienungsanleitung: ANSMANN BC 6-12V / 10A Intelligentes Autobatterieladegerät
Umfassende Bedienungsanleitung für das ANSMANN SM 6-12V / 10A intelligente Autobatterieladegerät. Erfahren Sie meh über die Funktionen, Sicherheitshinweise und Ladeprogramme für 6V jeung 12V Batterien.
Praview Ansmann Home Charger HC120PD Manual Pamaké
User manual for the Ansmann Home Charger HC120PD, a USB-C PD charger designed for operating devices with a standard USB interface. Provides safety instructions, operation guidelines, technical specifications, and disposal information.
Praview Buku Panduan Pangguna Spiker Bluetooth ANSMANN BTS-MINI
Buku pituduh pikeun spiker Bluetooth portabel ANSMANN BTS-MINI, anu ngajelaskeun sacara rinci setelan, fungsi, pedoman kaamanan, peringkat tahan cai IPX7, sareng inpormasi pembuangan.
Praview ANSMANN POWERBANK 5.4 Tipe C Manual
Buku pituduh pikeun ANSMANN POWERBANK 5.4 Tipe C, anu nyayogikeun pitunjuk ngeunaan panggunaan, ngecas, spésifikasi téknis, pedoman kaamanan, sareng inpormasi lingkungan.
Praview ANSMANN SMART ECO SET Ladegerät Bedienungsanleitung
Umfassende Bedienungsanleitung für das ANSMANN SMART ECO SET Ladegerät. Enthält Informationen zur Verwendung, Sicherheit, technischen Daten und Umweltaspekten für AA/AAA NiCd/NiMH Akkus.