VacLife Cordless Tire Inflator Portable Air Compressor User Manual

1. Bubuka

The VacLife Cordless Tire Inflator (Model ATJ-6988) is a portable and versatile air compressor designed for inflating tires on cars, bikes, and other inflatables. Its compact, cordless design makes it convenient for on-the-go use, providing up to 150 PSI pressure. Equipped with a powerful motor, it offers quick and efficient inflation, along with an LED digital display for real-time pressure monitoring and an auto-shutoff feature for safe operation. The integrated LED light enhances usability in low-light conditions.

2. Parentah Kasalametan

Mangga baca sareng ngartos sadaya parentah kaamanan sateuacan ngoperasikeun alat. Paranti nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, jeung/atawa tatu serius.

• Jauhkeun alat ti barudak jeung piaraan.
• Do not operate the inflator in wet conditions or expose it to rain.
• Mastikeun setelan tekanan bener keur item keur inflated pikeun nyegah over-inflasi sarta poténsi bursting.
• Allow the device to rest for at least 10 minutes after every 10 minutes of continuous use to prevent overheating.
• Ulah ngabongkar atawa ngaropéa alat. Rujuk sadayana jasa ka tanaga anu mumpuni.
• Use only the provided charging cable and compatible power sources.
• The device operates at a noise level of approximately 80 dB. Use hearing protection if sensitive to noise or in prolonged use.
• Buang batré sacara tanggung jawab nurutkeun peraturan lokal.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• VacLife Cordless Tire Inflator Unit
• Selang Udara nganggo Konektor Katup Schrader
• Presta klep adaptor
• Ball Needle Nozzle
• Inflatable Toy Nozzle
• Kabel Ngecas USB (USB-A kana USB-C)
• Manual pangguna (dokumén ieu)

4. Produk Langkungview

Figure 4.1: VacLife Cordless Tire Inflator and Included Accessories. The image displays the main inflator unit on the right, featuring a digital display and control buttons. To the left, an air hose, two different cone-shaped nozzles, a ball needle, and a USB charging cable are shown.

4.1 Komponén

• Unit Utama: Houses the motor, battery, display, and controls.
• Selang hawa: Connects the inflator to the tire valve.
• Nozzles: Various adapters for different inflation needs (e.g., car tires, bike tires, sports balls, inflatable toys).
• Palabuhan Ngecas USB: Pikeun ngecas batré internal.

4.2 Kontrol jeung tampilan

• Tombol Daya (Tengah): Press and hold to turn on/off. Short press to start/stop inflation.
• Tombol Mode (M): Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, KG/CM²).
• Tombol '+' / '-': Adjusts the target pressure value.
• Tombol Lampu (ikon Panonpoé): Toggles the LED light modes (Flashlight, Alarm Light, SOS Light).
• Tampilan Digital LED: Shows real-time pressure, preset pressure, selected unit, battery level, and inflation mode icons.

5. Setélan

5.1 Ngecas Alat

1. Connect the provided USB charging cable to the charging port on the inflator.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the LED display will show charging status. A full charge typically takes 3-4 hours.
4. Once fully charged, the device can operate continuously for approximately 20 minutes.

5.2 Ngapasangkeun Selang Udara sareng Nozel

1. Screw the air hose securely into the air outlet port on the top of the inflator.
2. Pilih nozzle anu pas pikeun barang anu anjeun hoyong kembangkeun.
3. Screw the selected nozzle onto the end of the air hose.

6. Parentah Operasi

6.1 Daya Hurung/Pareuman

• To turn on: Press and hold the Power button (center button) for 2-3 seconds until the display illuminates.
• To turn off: Press and hold the Power button for 2-3 seconds. The device will also automatically shut off after a period of inactivity.

6.2 Selecting Pressure Unit and Mode

• After powering on, press the Mode button (M) to cycle through the four available pressure units: PSI, BAR, KPA, and KG/CM².
• Continue pressing the Mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Each mode may have a default pressure range.

6.3 Netepkeun Tekanan Target

• Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The preset pressure will flash on the display.
• Refer to your vehicle's or item's recommended pressure (usually found on a sticker inside the car door, owner's manual, or on the item itself).

6.4 Inflasi Mimiti

1. Connect the air hose (with appropriate nozzle) securely to the valve stem of the item to be inflated. The display will show the current pressure.
2. Press the Power button (center button) once to start inflation. The inflator will begin pumping air, and the real-time pressure will be displayed.
3. The inflator will automatically stop once the preset target pressure is reached. This is the auto-shutoff feature.
4. Pikeun ngeureunkeun inflasi sacara manual iraha waé, pencét tombol Daya deui.
5. Cabut selang hawa tina gagang klep.

Example: Inflating a 195/55 R15 car tire from 22 PSI to 36 PSI typically takes approximately 3 minutes. For optimal performance and device longevity, allow the inflator to rest for at least 10 minutes after every 10 minutes of continuous operation.

6.5 Ngagunakeun Lampu LED

• Press the Light button (sun icon) to cycle through the LED light modes:
• Pencét munggaran: Activates the constant flashlight mode.
• Pencét kadua: Activates the alarm light (slow flashing).
• Pencét katilu: Activates the SOS light (Morse code for SOS).
• Pencét Kaopat: Pareuman lampu LED.

7. Pangropéa

• beberesih: Ngusap bagian luar alat ku lemes, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from power before cleaning.
• Panyimpenan: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
• Perawatan batré: To prolong battery life, fully charge the device before long-term storage and recharge it every 3-6 months if not in use. Avoid completely draining the battery frequently.
• Perawatan nozzle: Keep nozzles clean and free of debris to ensure proper air flow.

8. Cara ngungkulan

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official VacLife websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.