1. Bubuka
Thank you for choosing the WORKPRO 7.2V Cordless Rotary Tool. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tool. Please read it thoroughly before use and retain it for future reference.
The WORKPRO 7.2V Cordless Rotary Tool is a versatile and compact device designed for various DIY and craft projects. Its lightweight design and variable speed settings make it suitable for tasks such as sanding, engraving, cutting, drilling, grinding, and polishing.
Figure 1: WORKPRO 7.2V Cordless Rotary Tool with included accessories and storage bag.
2. Émbaran Kasalametan
Salawasna merhatikeun pancegahan kaamanan dasar pikeun ngirangan résiko seuneu, kejutan listrik, sareng tatu pribadi nalika ngoperasikeun alat listrik.
- Baca Sadaya Parentah: Familiarize diri jeung operasi alat sarta tungtunan kaamanan.
- Nganggo panyalindungan panon: Salawasna maké kacasoca kaamanan atawa kacasoca kaamanan kalawan shields samping.
- Workpiece Aman: Salawasna clamp atawa ngamankeun benda kerja pikeun nyegah gerakan nalika operasi.
- Ngajaga Wewengkon Gawé Bersih: Daérah anu kacumponan ngundang kacilakaan.
- Hindarkeun Lingkungan Anu Bahaya: Ulah make parabot kakuatan dina damp atanapi lokasi baseuh, atanapi ngalaan aranjeunna hujan. Tetep aréa damel ogé hurung.
- Jauhkeun Barudak: Kabéh sémah kudu dijaga dina jarak aman ti wewengkon gawé.
- Pakéan anu leres: Do not wear loose clothing or jewelry. They can be caught in moving parts. Non-skid footwear is recommended. Wear protective hair covering to contain long hair.
- Anggo Alat anu Katuhu: Entong maksakeun alat atanapi kantétan pikeun ngalakukeun padamelan anu henteu dirancang.
- Pegatkeun Daya: Disconnect the tool from its power source before making adjustments, changing accessories, or storing it.
- Ulah Overreach: Tetep footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
- Ngajaga Alat-alat kalayan ati-ati: Tetep parabot seukeut tur bersih pikeun kinerja hadé tur aman. Turutan parentah pikeun lubricating jeung ngaganti asesoris.
- Pariksa Bagian Rusak: Sateuacan nganggo alat salajengna, penjaga atanapi bagian sanésna anu ruksak kedah dipariksa sacara saksama pikeun nangtukeun yén éta bakal beroperasi leres sareng ngalaksanakeun fungsi anu dimaksud.
- Do Not Operate While Charging: For safety reasons, do not use the tool while it is being charged.
3. Produk Langkungview
The WORKPRO 7.2V Cordless Rotary Tool is designed for precision work. Understanding its components is key to effective operation.
Figure 2: Key components of the rotary tool.
komponén:
- Hurungkeun ON / OFF: Aktipkeun sareng mareuman alat.
- Tombol Kontrol Speed: Nyaluyukeun kecepatan puteran alat.
- Layar Témbongkeun Digital: Némbongkeun setélan kecepatan ayeuna.
- Mur Collet: Secures the accessory bits in place.
- Panas Dissipation Hole: Ensures proper cooling of the motor during operation.
- Indikator LED: Nyayogikeun katerangan pikeun daérah padamelan.
- Port ngecas USB-C: Pikeun ngecas batré internal.
Asesoris kaasup:
Your WORKPRO rotary tool comes with 117 diverse accessories, enabling a wide range of applications. These include:
Gambar 3: Leuwihview of the 117 included accessories.
- Grinding/Asah: Grinding stones and wheels for material shaping and sharpening.
- Ukiran: Diamond bits for detailed carving and engraving.
- ngagosok: Wool felt wheels, felt wheels, screw mandrels, and metal brushes for achieving smooth, shiny finishes.
- panggilingan: Milling bits for precise material removal.
- motong: Cutting discs and saw blades for various cutting tasks, along with a cutting disc holder.
- Ampelas: Sandpaper, rubber sanding drums, and sanding bands for surface preparation and finishing.
- Collets: 2.35mm and 3.2mm collets to accommodate different shank sizes.
- Pangeboran: 2.35mm and 3.2mm drill bits for small-scale drilling.
- Kunci: For securing and loosening collet nuts.
4. Setélan
4.1 Ngecas Alat
The tool is equipped with a 7.2V 1100mAh Lithium-ion rechargeable battery. Before first use, fully charge the tool.
- Connect the provided USB-C charging cable to the tool's USB-C charging port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., computer, USB wall adapter).
- The digital display will indicate charging status. A full charge typically takes approximately 2 hours.
- Saatos dicas pinuh, pegatkeun sambungan kabel ngecas.
Note: For optimal battery life, it is recommended to store the tool with the battery charged between 50% and 75%. Recharge the tool at least once every 3 to 6 months if not used regularly.
Figure 4: Charging the rotary tool via USB-C.
4.2 Masang Asesoris
The WORKPRO rotary tool features an automatic spindle lock design for easy and secure accessory changes.
- Ensure the tool is turned OFF.
- Unscrew the collet nut at the front of the tool.
- Select the appropriate collet size for your desired accessory (2.35mm or 3.2mm). Insert the collet into the tool if not already present.
- Insert the shank of the accessory bit into the center of the collet nut. Ensure the bit is fully seated.
- Hand-tighten the collet nut. For a secure fit, use the included wrench to tighten the collet nut firmly. Do not overtighten.
Figure 5: Two-step accessory replacement process.
Figure 6: Detailed installation steps for various accessories.
Note: The automatic spindle lock engages when the tool is off, allowing for accessory changes without needing to press a separate button. A slight clicking sound when the tool stops is normal due to this mechanism.
5. Parentah Operasi
5.1 Powering on / Pareum
To turn the tool ON, slide the ON/OFF switch to the 'ON' position. To turn it OFF, slide the switch to the 'OFF' position.
5.2 Nyaluyukeun Speed
The tool features 6 variable speed settings, ranging from 5000 RPM to 30000 RPM. Press the Speed Control Button to cycle through the speeds. The current speed setting will be displayed on the digital screen.
- Speed I: 5000 RPM
- Speed II: 10000 RPM
- Speed III: 15000 RPM
- Speed IV: 20000 RPM
- Speed V: 25000 RPM
- Speed VI: 30000 RPM
Choose the appropriate speed for your task and material. Lower speeds are generally suitable for polishing, delicate work, and softer materials, while higher speeds are for cutting, grinding, and harder materials.
Figure 7: Variable speed settings and powerful motor.
5.3 Lampu LED terpadu
The tool includes an integrated LED light that illuminates the work area, improving visibility in dimly lit spaces and for detailed tasks.
Figure 8: Using the LED light for precision engraving.
5.4 Aplikasi
The WORKPRO rotary tool is highly versatile and can be used for:
- motong: Use appropriate cutting discs for various materials.
- Ukiran/Ukiran: Utilize diamond bits for intricate designs on wood, plastic, or soft metals.
- ngagosok: Apply felt wheels and polishing compounds to restore shine to surfaces.
- Ampelas: Use sanding bands and drums for smoothing rough edges or preparing surfaces.
- Pangeboran: Employ small drill bits for precision holes.
Gambar 9: Kelamples of versatile applications.
6. Pangropéa
6.1 beberesih
- Salawasna pegatkeun sambungan alat tina sagala sumber kakuatan saméméh beberesih.
- Ngagunakeun lemes, damp lawon pikeun ngusap handap exterior alat. Ulah make bahan kimia kasar atawa cleaners abrasive.
- Use a small brush or compressed air to clear dust and debris from the heat dissipation holes and around the collet area.
6.2 Kamanusaan sarta Studi Batré
- To prolong battery life, avoid completely discharging the battery regularly.
- For long-term storage, ensure the battery is charged to approximately 50-75%. Recharge the tool every 3 to 6 months to prevent deep discharge and maintain battery health.
- Simpen alat dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
6.3 Panyimpenan aksésori
Keep all accessories organized in the provided storage bag or a suitable container to prevent loss and damage.
7. Cara ngungkulan
This section addresses common issues you might encounter with your WORKPRO rotary tool.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | Batré discharged. | Charge the tool fully using the USB-C cable. |
| Tool stops unexpectedly during use. | Batré lemah atanapi alat kelebihan beban. | Recharge the battery. Reduce pressure on the tool or use a lower speed setting for the task. |
| Clicking sound when turning off. | Normal operation of the automatic spindle lock. | This is a normal function and does not indicate a fault. |
| Accessory bit is loose or wobbles. | Collet nut not tightened sufficiently or incorrect collet size. | Ensure the correct collet size is used for the accessory. Tighten the collet nut firmly with the included wrench. |
| Reduced performance or short runtime. | Battery degradation or improper charging/storage. | Ensure proper charging and storage practices are followed (refer to Section 6.2). If the issue persists, the battery may need replacement. |
8. Spésifikasi
Below are the technical specifications for the WORKPRO 7.2V Cordless Rotary Tool (Model W123024A).
| Fitur | Spésifikasi |
|---|---|
| merek | WORKPRO |
| Nomer modél | W123024A |
| Voltage | 7.2 volt |
| Jenis Batré | Litium-ion (1 kaasup) |
| Kapasitas batré | 1100 mAh |
| Max Rotasi Speed | 30000 rpm |
| Speeds Variabel | 6 (5000-30000 RPM) |
| Waktu Ngecas | Kira-kira. 2 jam |
| Runtime (Max Speed) | Kira-kira. 45 menit |
| Beurat | 227 gram |
| Ukuran (L x W x H) | 25.2 x 16.8 x 5.5 cm |
| Fitur husus | Cordless, Integrated LED Light, Automatic Spindle Lock |
| Komponén Kaasup | 117 Asesoris |
| Produsén | Hang Zhou Great Star Industrial Co., LTD |
9. Garansi jeung Rojongan
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. WORKPRO is committed to providing quality products and customer satisfaction.
If you encounter any issues or have questions regarding your WORKPRO 7.2V Cordless Rotary Tool, please contact the seller or WORKPRO customer support through their official website or contact channels. Please have your model number (W123024A) and purchase details ready when seeking support.
