1. Bubuka
Thank you for choosing the Morpilot MF-MP01 Automatic Electric Milk Frother. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and retain it for future reference.
2. Parentah Kasalametan
- Baca sadaya parentah sateuacan nganggo alat.
- Do not immerse the base unit in water or other liquids. Only the frothing jug can be rinsed.
- Pastikeun catu daya voltage cocog sareng labél rating dina alat.
- Ulah ngajalankeun alat ku kabel atawa colokan ruksak.
- Jauhkeun alat tina jangkauan barudak.
- Always place the frother on a flat, stable, heat-resistant surface.
- Do not fill above the maximum fill line to prevent overflow.
- Use only whole milk (fat content > 3.0%) for optimal frothing results.
- Cabut colokan tina stop kontak nalika henteu dianggo sareng sateuacan beberesih.
3. Produk Langkungview
The Morpilot MF-MP01 is a versatile 4-in-1 electric milk frother designed for various milk preparations.
Gambar 3.1: Morpilot MF-MP01 Milk Frother with included whisk attachments and cleaning brush.
komponén:
- Electric Milk Frother Unit (with non-stick coating)
- Power Base (360° swivel)
- 2 Frothing Whisks (one for thick foam, one for thin foam)
- 1 Heating Whisk (for heating milk without frothing)
- Sikat beberesih
- Manual pamaké
Gambar 3.2: Internal components and features including scratch-resistant interior, maximum frothing level, minimum liquid level, insulating plastic, non-stick coating, and 360° swivel base.
4. Setélan
- Ngabongkar: Sacara saksama miceun sadaya komponén tina bungkusan.
- Bersih: Before first use, clean the frothing jug interior and whisks with warm soapy water using the provided cleaning brush. Wipe the exterior of the frother and the power base with a damp cloth. Do not immerse the frother unit or power base in water.
- Assemble Whisk: Select the appropriate whisk for your desired function (frothing or heating) and securely install it onto the shaft at the bottom of the frothing jug. Ensure it clicks into place.
Gambar 4.1: Step 1 shows how to install the whisk into the frother unit.
5. Parentah Operasi
The Morpilot MF-MP01 offers four distinct functions for milk preparation. For best results, use cold whole milk (fat content > 3.0%).
Léngkah-léngkah Operasi Umum:
- Tempat di Base: Position the frother unit securely onto the power base.
- Tambahkeun Susu: Pour the desired amount of milk into the frothing jug. Observe the internal fill lines:
- Maximum frothing capacity: 130 ml
- Maximum heating capacity: 240 ml (8.12 oz)
- Pilih Fungsi: Press the power button to cycle through the four modes. The indicator lights will illuminate to show the selected function.
- Mimitian: The frother will automatically begin operation and stop when the cycle is complete (approximately 80-120 seconds).
Gambar 5.1: The control button allows selection of four functions: warm airy milk foam, warm dense milk foam, hot milk, and cold milk foam.
Fungsi sadia:
- Warm Airy Milk Foam: Cocog pisan pikeun cappuccino.
- Warm Dense Milk Foam: Cocog pikeun latte.
- Busa Susu Tiis: Perfect for iced coffees or cold beverages.
- Panas susu: For warming milk without frothing.
Gambar 5.2: The frother quickly prepares creamy milk foam for various drinks.
6. Pangropéa jeung beberesih
Regular cleaning ensures optimal performance and extends the lifespan of your frother.
- Cabut colokan: Salawasna cabut alat ti toko listrik sateuacan diberesihan.
- Tenang: Allow the frother to cool down completely after use.
- Leupaskeun Whisk: Carefully remove the whisk from the frothing jug.
- Interior beresih: Rinse the interior of the frothing jug with warm water immediately after use. Use the provided cleaning brush and a small amount of mild dish soap to remove any milk residue. The non-stick coating makes cleaning easier.
- Kocok Bersih: Wash the whisk under running water.
- Luar bersih: Lap bagian luar unit frother sareng dasar daya nganggo iklanamp lawon. Ulah make cleaners abrasive atawa scourers.
- garing: Pastikeun yén sadaya bagian garing tuntas sateuacan dipasang deui atanapi disimpen.
Gambar 6.1: The attached brush facilitates easy cleaning of the frother's interior.
7. Cara ngungkulan
If you encounter issues with your Morpilot MF-MP01, please refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Frother teu hurung. | Teu plugged di; kakuatan outage; frother teu dipasang kalawan bener dina dasarna. | Ensure the power cord is securely plugged in. Check the power outlet. Re-seat the frother unit firmly on the power base. |
| Milk is not frothing or foam is poor quality. | Insufficient milk fat content; incorrect whisk; milk level too high/low; cold milk not used for cold foam. | Use cold whole milk (fat > 3.0%). Ensure the correct whisk is installed for frothing. Do not exceed the MAX frothing line. For cold foam, ensure milk is cold. |
| Susu teu dipanaskeun. | Incorrect whisk; milk level too high/low. | Ensure the heating whisk is installed if only heating is desired. Do not exceed the MAX heating line. |
| Frother stops prematurely. | Overheating; internal sensor issue. | Unplug and allow the unit to cool down for at least 10 minutes. Ensure proper ventilation. If the problem persists, contact customer support. |
| Bau kaduruk atawa susu nu nempel di handap. | Residue from previous use; insufficient milk. | Clean the frothing jug thoroughly after each use. Ensure there is enough milk to cover the heating element. |
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Morpilot |
| Nomer modél | MF-MP01 |
| Warna | Bodas |
| Ukuran (L x W x H) | 9.8 x 9.8 x 20 cm |
| Beurat | 810 gram |
| Kapasitas (Ngabuih) | Nepi ka 130 ml |
| Kapasitas (Pemanasan) | Nepi ka 240 ml |
| Kakuatan | 400 Watt |
| Bahan | Plastic (with non-stick interior) |
| Fitur husus | Non-stick coating, 4-in-1 functions |
| Jumlah Setélan | 4 |
9. Garansi jeung Rojongan
Morpilot products are manufactured with quality and care. For warranty information or technical support, please refer to the warranty card included with your purchase or contact Morpilot customer service through their official website or the retailer where the product was purchased. Please have your model number (MF-MP01) and purchase date ready when contacting support.
