1. Bubuka
This manual provides detailed instructions for the safe and efficient use of your Blitzwolf BW-CML5 Monitor Light Bar. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Eusi Paket
Mangga parios eusi bungkusan nalika dibuka pikeun mastikeun sadaya barang aya sareng henteu ruksak. Upami aya barang anu leungit atanapi ruksak, mangga ngahubungi layanan palanggan.
- Blitzwolf BW-CML5 Monitor Light Bar
- Kadali Jauh Nirkabel
- Kabel Daya USB
- Manual pangguna (dokumén ieu)
3. Parentah Kasalametan
Pikeun mastikeun operasi anu aman sareng nyegah karusakan, punten perhatikeun pancegahan kaamanan ieu:
- Ulah ngalaan alat ka cai atawa kaleuleuwihan Uap.
- Hindarkeun nempatkeun alat caket sumber panas atanapi dina sinar panonpoé langsung.
- Ulah nyobian ngabongkar atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Use only the provided USB power cable or a certified equivalent.
- Jauhkeun tina jangkauan barudak.
- Ensure the light bar is securely attached to the monitor to prevent accidental falls.
4. Setup jeung Instalasi
Follow these steps to set up your monitor light bar:
- Pasang Lampu Bar: Gently place the light bar on top of your monitor. The adjustable clip mechanism should securely grip the top edge of the monitor. Ensure the light source faces downwards towards your desk.
- Sambungkeun Kakuatan: Connect the USB power cable to the light bar's power input port. Plug the other end of the USB cable into a USB port on your computer or a compatible USB power adapter (5V/1A recommended).
- Posisi Remote Control: Place the wireless remote control on your desk within easy reach. The remote operates wirelessly and does not require direct line of sight to the light bar.
Gambar 1: The Blitzwolf BW-CML5 Monitor Light Bar attached to a monitor, with its wireless remote control placed on a desk. This image illustrates the typical setup of the product.
5. Parentah Operasi
The Blitzwolf BW-CML5 is controlled via its wireless remote. Familiarize yourself with the remote's functions:
Gambar 2: A nutup-up view of the wireless remote control for the Blitzwolf BW-CML5 Monitor Light Bar, showing the central rotary knob and three "DIY" preset buttons.
- Hurungkeun/Pareuman: Press the central rotary knob once to turn the light bar on or off.
- Saluyukeun Caang: Rotate the central knob clockwise to increase brightness and counter-clockwise to decrease brightness.
- Saluyukeun Suhu Warna: Press and hold the central knob for approximately 2 seconds. While holding, rotate the knob to cycle through different color temperature settings (e.g., warm white, neutral white, cool white). Release the knob to set the desired temperature.
- DIY Preset Buttons (DIY1, DIY2, DIY3): These buttons allow you to save and recall your preferred brightness and color temperature settings.
- Pikeun nyimpen prasetél: Adjust the light bar to your desired brightness and color temperature. Then, press and hold one of the DIY buttons (DIY1, DIY2, or DIY3) for approximately 3 seconds until the light blinks, indicating the setting has been saved.
- Pikeun ngelingan Preset: Simply press the corresponding DIY button (DIY1, DIY2, or DIY3) once to activate the saved setting.
6. Pangropéa
Proper maintenance ensures the longevity of your device:
- beberesih: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light bar and remote control. Do not use abrasive cleaners or solvents.
- Panyimpenan: Upami teu dianggo kanggo waktos anu panjang, simpen alat di tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
7. Cara ngungkulan
If you encounter issues with your Blitzwolf BW-CML5, please refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu bar teu hurung. | No power, loose connection, remote battery low. | Check USB power cable connection. Ensure USB power source is active. Replace remote control batteries if applicable (check remote manual for battery type). |
| Kadali jauh henteu ngaréspon. | Remote battery low, interference, not paired. | Replace remote control batteries. Move remote closer to the light bar. If issues persist, refer to the remote's specific pairing instructions (if any, usually automatic for these devices). |
| Lampu kedip-kedip atanapi redup teu disangka-sangka. | Insufficient power supply, faulty cable. | Ensure the USB power source provides sufficient power (5V/1A recommended). Try a different USB port or power adapter. Replace the USB cable if necessary. |
If the problem persists after trying these solutions, please contact Blitzwolf customer support for further assistance.
8. Spésifikasi
| Modél | BW-CML5 |
| merek | BlitzWolf |
| Ukuran produk (L x W x H) | 10 x 5 x 1.27 cm |
| Beurat produk | 100 g |
| Masukan Voltage | 5V (ngalangkungan USB) |
| Warna | Hideung |
9. Garansi jeung Rojongan
Blitzwolf products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Blitzwolf website. Please have your model number (BW-CML5) and purchase information ready when contacting support.
For further assistance, you may contact Blitzwolf customer service through their official channels.
