Subwoofer Monoblok Memphis Audio PRX1000.1V2 AmpManual Pamaké lifier

1. Émbaran Kasalametan

Please read all instructions carefully before installing and operating your Memphis Audio PRX1000.1V2 ampliifier. Gagal nuturkeun pedoman ieu tiasa nyababkeun karusakan kana amplifier, speakers, or vehicle, and may void your warranty.

• Pamasangan profésional disarankeun: For optimal performance and safety, professional installation by an authorized Memphis Audio dealer is highly recommended.
• Sumber Daya: Ensure the vehicle's battery is disconnected before making any power connections to prevent electrical shorts.
• Wiring: Use appropriate gauge wiring for power, ground, and speaker connections as specified in this manual. Improper wiring can lead to overheating and damage.
• Pamasangan: Gunung nu amplifier securely in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate airflow around the amppangagung.
• Tingkat volume: Paparan kana volume anu luhur dina jangka waktu anu lila tiasa nyababkeun karusakan dédéngéan. Salawasna dangukeun dina volume anu sedeng.
• Grounding: A proper ground connection is crucial for amplifier stability and performance. Connect the ground wire directly to the vehicle's chassis, ensuring a clean, paint-free metal-to-metal contact.

2. Produk Langkungview

The Memphis Audio PRX1000.1V2 is a high-performance monoblock subwoofer amplifier designed to deliver powerful and precise bass. This amplifier is engineered for efficient power delivery, enhancing low-frequency performance in your vehicle's audio system. Its robust design is optimized for driving subwoofers effectively.

Gambar 2.1: Top view of the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier. This image shows the sleek black casing with the illuminated Memphis logo.

2.1. Fitur konci

• Monoblock subwoofer ampdesain liifier.
• 1000 Watts RMS x 1 at 1-ohm for powerful and precise bass output.
• Optimized for efficient subwoofer driving.
• Efficient power delivery for enhanced low-frequency performance.
• Ideal for dedicated, high-powered subwoofer setups.

2.2. Eusi Paket

Saatos ngabongkar, mangga pastikeun sadaya barang aya:

• Subwoofer Monoblok Memphis Audio PRX1000.1V2 Amppangagung
• Manual pangguna (dokumén ieu)
• Parabot Pemasangan (sekrup, jsb.)
• Remote Bass Level Control (if included with your model)

3. Pitunjuk Instalasi

Proper installation is critical for the performance and longevity of your amplifier. Upami anjeun teu yakin kana léngkah-léngkah naon waé, konsultasi ka installer profésional.

3.1. Lokasi pamasangan

Pilih lokasi pamasangan anu:

• Garing sareng bébas tina kalembaban.
• Allows for adequate airflow around the amplifier pikeun nyegah overheating.
• Aman sareng dijaga tina karusakan fisik.
• Is not exposed to direct sunlight or excessive heat.

Lokasi umum kalebet handapeun korsi, dina bagasi, atanapi di tukangeun panel.

3.2. Sambungan Wiring

Sateuacan ngadamel sambungan naon waé, pegatkeun sambungan terminal batré négatip kendaraan.

Gambar 3.1: View of the power and speaker output terminals on the Memphis Audio PRX1000.1V2 amplifier. This side features connections for GND (Ground), REM (Remote Turn-On), +12V (Power), and Speaker Out.

1. Sambungan Daya (+ 12V):

   Connect a heavy-gauge power wire (e.g., 4 AWG or larger, depending on total system power) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse holder (rated for the amplifier's current draw) within 18 inches (45 cm) of the battery.
2. Sambungan taneuh (GND):

   Connect a heavy-gauge ground wire (same gauge as the power wire) from the GND terminal on the amplifier to a clean, solid metal point on the vehicle's chassis. Ensure the contact point is free of paint, rust, or dirt for an effective ground. The ground wire should be as short as possible, ideally less than 3 feet (1 meter).

3. Jauh Hurungkeun (REM):

   Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output (usually a blue/white wire) to the REM terminal on the amplampu. Kawat ieu nunjukkeun sinyal ka amplampu pikeun ngahurungkeun sareng mareuman nganggo head unit anjeun.

4. Speaker Output (SPEAKER OUT):

   Connect your subwoofer(s) to the SPEAKER OUT terminals. This is a monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to present a 1-ohm load for maximum power. Ensure correct polarity (+ to + and - to -) for all speaker connections.

Gambar 3.2: View of the input and control panel on the Memphis Audio PRX1000.1V2 amplifier. This side includes RCA Input/Output, REM/DC/Audio switch, Input Level control, and Remote bass control port.

5. RCA Input (INPUT):

   Connect RCA cables from your head unit's subwoofer pre-out (or full-range pre-out if no dedicated subwoofer output is available) to the RCA INPUT terminals on the amppangagung.
6. RCA Output (OUTPUT):

   The RCA OUTPUT terminals allow you to pass the audio signal to another ampliifier dina multi-amppangaturan lifier.

7. Remote Bass Control (REMOTE):

   Connect the included remote bass level control to the REMOTE port. This allows for convenient adjustment of the subwoofer level from the driver's seat.

4. Parentah Operasi

4.1. Mimiti Power-Up

After all connections are made and verified, reconnect the vehicle's negative battery terminal. Turn on your head unit. The amplifier should power on, indicated by an illuminated logo or power indicator.

4.2. Adjusting Input Level (Gain)

The INPUT LEVEL control (often referred to as gain) matches the amplifier's input sensitivity to the output level of your head unit. It is not a volume control.

1. Hurungkeun amplifier's INPUT LEVEL control to its minimum (fully counter-clockwise) setting.
2. Set your head unit's volume to about 75-80% of its maximum level.
3. Play a dynamic piece of music with strong bass content.
4. Slowly increase the INPUT LEVEL control on the amplifier until you hear distortion, then back it off slightly until the sound is clean.
5. Avoid setting the gain too high, as this can lead to clipping and damage to your subwoofers.

4.3. REM/DC/Audio Switch

This switch controls how the amplifier turns on:

• REM: The amplifier turns on via the remote turn-on wire from the head unit. This is the standard and recommended method.
• DC: The amplifier senses a DC offset on the speaker-level inputs (if using a line output converter or high-level input) and turns on automatically.
• Audio: The amplifier senses an audio signal on the RCA inputs and turns on automatically.

For most installations with an aftermarket head unit, set this switch to REM.

4.4. Remote Bass Level Control

The remote bass control allows you to adjust the subwoofer output level conveniently from the driver's position without needing to access the amplirén langsung.

5. Pangropéa

The Memphis Audio PRX1000.1V2 amplifier merlukeun pangropéa minimal pikeun mastikeun kinerja jangka panjang.

• beberesih: Ngusap périodik ampexterior lifier urang ku lemes, lawon garing. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Sambungan: Annually check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can cause intermittent performance or damage.
• Ventilasi: Pastikeun yén amplifier's cooling fins are not obstructed by debris or other objects to maintain proper heat dissipation.

6. Guide ngungkulan

Upami anjeun ngalaman masalah sareng anjeun amplifier, refer to the following common issues and solutions before contacting technical support.

7. Spésifikasi

Key technical specifications for the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amppanguat:

• model: PRX1000.1V2
• Tipe: Monoblock Subwoofer Amppangagung
• Kaluaran Daya RMS: 1000 Watts x 1 at 1-Ohm
• Beurat barang: 4.9 pon
• Ukuran Paket: 10.8 x 7.6 x 4.2 inci
• Pabrikan: Memphis Audio
• ASIN: B0CX9YJMT7
• Titimangsa munggaran sadia: Pébruari 27, 2024

8. Garansi jeung Rojongan

8.1. Émbaran jaminan

The Memphis Audio PRX1000.1V2 amplifier hadir kalawan a 1-Taun Garansi Produsén. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear.

For specific warranty terms and conditions, please refer to the documentation included with your product or contact Memphis Audio directly.

8.2. Rojongan Téknis

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Memphis Audio customer support or your authorized Memphis Audio dealer. You can typically find contact information on the manufacturer's official websitus.

When contacting support, please have your product model number (PRX1000.1V2) and proof of purchase readily available.