FLAMMA FX50 Portable Guitar Multi-Effects Pedal

1. Bubuka

The FLAMMA FX50 is a compact and versatile multi-effects pedal designed for guitarists. It integrates a wide range of effects, drum rhythms, and a tuner into a portable unit, suitable for practice, recording, and small gigs. This manual provides detailed instructions to help you get the most out of your FX50 pedal.

2. Produk Langkungview

The FX50 features an intuitive layout with dedicated knobs for various effects and functions. Below is an overview of the pedal's main components and controls.

Figure 1: FLAMMA FX50 Portable Guitar Multi-Effects Pedal

Kontrol sareng Sambungan:

• Tombol VOL: Saluyukeun volume kaluaran sakabéh.
• MOD Knob: Selects and adjusts modulation effects (Chorus, Flanger, Phaser, Tremolo).
• Kenop DLY/REV: Selects and adjusts delay and reverb effects (Echo, Room, Hall, Delay).
• DRUM/VALUE Knob: Selects drum rhythms and adjusts their volume. Press and hold for Tuner function.
• Knob GAIN: Adjusts the gain level for drive effects.
• Kenop DRIVE: Selects and adjusts various drive effects (Distortion, Overdrive, Crunch, Fuzz, Clean).
• Knop TONE: Adjusts the overall tone, from bass-heavy to treble-heavy.
• Patch Buttons: Navigates through preset and user patches.
• Tombol Toko: Saves user-defined patches.
• Saklar kakuatan: Hurungkeun unit / pareum.
• Cab Sim Switch: Toggles cabinet simulation on/off.
• DC IN Jack: For 9V DC power adapter.
• Jack TELEPON: 1/8" stereo audio jack for headphones.
• Jack OUTPUT: 1/4" mono audio jack for connecting to a guitar amppangagung.
• AUX Dina Jack: 1/8" stereo audio jack for connecting external music players.
• INPUT Jack: 1/4" mono audio jack for connecting your guitar.

Figure 2: FLAMMA FX50 Input/Output Jacks

3. Setélan

3.1 suplai kakuatan

The FX50 can be powered by either a DC 9V adapter (included) or two AAA batteries (not included).

• Adaptor DC 9V: Connect the included 9V DC adapter to the DC IN jack. Ensure the adapter's plug polarity is positive on the barrel and negative in the center.
• Batré: To use batteries, open the battery compartment on the back of the pedal and insert two AAA batteries, observing the correct polarity.

Figure 3: Power Options (Corded and Battery)

3.2 Connecting Your Gear

1. Sambungan Gitar: Sambungkeun gitar listrik anjeun ka INPUT Jack using a 1/4" mono audio cable.
2. Sambungan Kaluaran:
   • For headphones, connect to the TELEPON Jack (1/8" stereo audio jack).
   • Pikeun hiji amplifier, connect to the OUTPUT Jack (1/4" mono audio jack).
3. External Music Player: Sambungkeun pamuter musik éksternal (contona, smartphone, pamuter MP3) ka AUX Dina Jack (1/8" stereo audio jack) to play along with backing tracks.

4. Parentah Operasi

4.1 Daya Hurung/Pareuman

Balikkeun Pindah kakuatan to the 'On' position to power on the unit. Flip it to 'Off' to power down.

4.2 Volume Control

Saluyukeun Knob VOL to set the desired output volume. This controls the overall loudness of your guitar signal and any active effects.

4.3 Modul Éfék

The FX50 features 5 effects modules with a total of 15 effects. Each module has a dedicated knob to select and adjust the effect intensity.

• MOD (Modulasi): Hurungkeun MOD Knob to select between Chorus (CH), Flanger (FL), Phaser (PH), and Tremolo (TR) effects. The position of the knob also adjusts the intensity of the selected effect.
• DLY/REV (Delay/Reverb): Hurungkeun DLY/REV Knob to select between Echo, Room, Hall, and Delay effects. The knob position also controls the intensity of the selected effect.
• DRIVE: Hurungkeun Knob DRIVE to select between Distortion (DS), Overdrive (OD), Crunch (CR), Fuzz (FZ), and Clean (CL) tones. The knob position adjusts the intensity of the drive.
• NGASILKEUN: Ngagunakeun éta GAMPANG Kancing to fine-tune the input gain for the drive effects.
• NADA: Ngagunakeun éta TON Knob to adjust the overall tonal character, from darker (bass-heavy) to brighter (treble-heavy).
• Sim kabin: Ngagunakeun éta Cab Sim Switch to toggle cabinet simulation on or off. This is particularly useful when connecting directly to a mixer or audio interface for a more natural ampsora ngagedekeun.

Figure 4: Modulation and Delay/Reverb Controls

4.4 Mesin Drum

The FX50 includes a drum machine with 40 rhythms and a tempo range of 60-270 BPM.

1. Select Drum Rhythm: Pencét éta DRUM/VALUE Knob to enter Drum status. Rotate the knob to select a rhythm type (01-40).
2. Adjust Drum Rhythm Volume: Pencét éta DRUM/VALUE Knob again. Rotate the knob to change the rhythm volume (00-09).
3. Start/Stop Drum Machine: Use the dedicated Play/Pause button to start or stop the drum rhythm.

Figure 5: Drum Rhythm Selection

Figure 6: Drum Rhythm Table

4.5 Patches

The FX50 offers 32 patches: 16 preset patches and 16 user patches. These allow you to save and recall your favorite effect combinations and settings.

• Select Patch: Ngagunakeun éta Patch Buttons to cycle through the available patches.
• Store Patch: After adjusting effects to your preference, press the Tombol Toko to save your settings to a user patch location.

Figure 7: 32 Patches Overview

4.6 Tuner Function

The built-in tuner allows for precise tuning of your guitar.

1. Activate Tuner: Pencét jeung tahan tombol DRUM/VALUE Knob for approximately 2 seconds to access the tuner mode.
2. Tune Guitar: Play a single string. The display will show the current pitch (A-G) and indicate whether the note is flat, correct, or sharp. Adjust your guitar's tuning pegs until the display shows a correct pitch.
3. Exit Tuner: Pencét éta DRUM/VALUE Knob again to exit tuner mode.

Figure 8: Tuner Display

5. Pangropéa

To ensure the longevity and optimal performance of your FLAMMA FX50 pedal, follow these maintenance guidelines:

• beberesih: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners or solvents.
• Panyimpenan: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• Ngagantian batré: When the pedal's performance degrades or the power indicator light dims, replace the AAA batteries. Ensure correct polarity when inserting new batteries.
• Penanganan: Avoid dropping the pedal or subjecting it to strong impacts. Do not attempt to disassemble the unit, as this will void the warranty.

6. Cara ngungkulan

If you encounter any issues with your FLAMMA FX50, refer to the following common problems and solutions:

• Henteu aya sora:
  • Check all cable connections (guitar, output, power).
  • Ensure the pedal is powered on and the power adapter is functioning correctly, or batteries are fresh and correctly inserted.
  • Verify the VOL knob is turned up.
  • Check if the guitar's volume knob is turned up.
• Unexpected Effects/Sound:
  • Check the settings of the MOD, DLY/REV, DRIVE, and TONE knobs.
  • Ensure the correct patch is selected.
  • If using headphones, ensure they are properly connected to the PHONES jack.
• Tuner Teu Ngarespon:
  • Ensure the guitar is properly connected to the INPUT jack.
  • Make sure you are playing a single note clearly.
• Drum Machine Not Playing:
  • Verify a drum rhythm is selected and the volume is turned up.
  • Press the Play/Pause button to start the rhythm.

If the issue persists, please contact FLAMMA customer support for further assistance.

7. Spésifikasi

8. Naon dina Box

Gambar 9: Naon dina Box

• 1 x FLAMMA FX50 Multi-Effects Pedal
• 1 x AC Adapter (9V DC)
• 1 x Safety Instruction & Warranty Card
• 1 x Stiker
• 1 x Kabel USB

9. Video Produk Resmi

10. Garansi jeung Rojongan

The FLAMMA FX50 comes with a manufacturer's warranty. Please refer to the included Safety Instruction & Warranty Card for detailed information regarding warranty coverage and terms. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please visit the official FLAMMA websitus atanapi ngahubungan departemén layanan palanggan maranéhna.