Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

Bubuka

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

Eusi pakét

Mangga parios pakét kanggo barang-barang ieu:

• 1 x Baseus Car Jump Starter
• 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
• 1 x USB ka Kabel Ngecas Tipe-C

Fitur konci

• Kinerja luhur: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
• Multi-fungsi: Acts as both a car jump starter and a portable power bank.
• Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
• Témbongkeun terpadu: Digital screen shows the remaining battery level of the jump starter.
• Résistansi Suhu ekstrim: High-performance polymer battery cells ensure operation in very low and high temperatures.
• Kasalametan canggih: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
• Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
• Lampu LED anu diwangun: Can be used as an emergency flashlight.
• Portabel: Compact size and technical parameters allow it to be carried on an airplane.

Émbaran Kasalametan

Mangga baca sadaya peringatan sareng pitunjuk kaamanan sateuacan nganggo produk ieu. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, sareng/atanapi tatu parah.

• Ulah ngabongkar, ngaropéa, atawa ngalereskeun alat.
• Ulah ngalaan alat ka hujan atawa beueus.
• Do not use the device if the battery clamps atawa kabel ruksak.
• Pastikeun sambungan polaritas anu leres (beureum clamp mun positif, hideung clamp to negative) to avoid short circuits.
• Jauhkeun tina jangkauan barudak.
• Entong luncat ngamimitian batréna beku.
• Ulah nyambungkeun cl positif jeung negatifamps babarengan.
• Paké alat di wewengkon well-ventilated.
• Remove the jump starter from the car battery immediately after starting the vehicle.
• Simpen alat dina tempat anu tiis sareng garing upami henteu dianggo.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. Saatos dicas pinuh, pegatkeun sambungan kabel ngecas.

Operating Instructions: Car Jump Starting

Turutan léngkah-léngkah ieu sacara saksama pikeun ngamimitian kendaraan anjeun:

1. Step 1: Connect the Smart Clamp kabel

   Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

2. Step 2: Connect to Car Battery

   Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Vehicle

   Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

4. Lengkah 4: Pegatkeun sambungan

   Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Pitunjuk Operasi: Fungsi Bank Daya

The Baseus BS-CH001 can also be used to charge your electronic devices.

1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
2. Sambungkeun tungtung kabel anu sanésna kana alat éléktronik anjeun.
3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
4. Once charging is complete, disconnect your device and the cable.

Pangropéa

• Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Simpen jump starter di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• For optimal battery life, fully charge the device at least once every 3-6 months.
• Tetep clamp cables clean and free from corrosion.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus websitus. Kanggo dukungan téknis, bantosan ngungkulan masalah, atanapi naroskeun ngeunaan suku cadang pangganti, mangga ngahubungi layanan palanggan Baseus ngalangkungan saluran resmi na.

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.