Numatic NX300 Lithium Battery Charging Dock

Bubuka

This user manual provides essential information for the safe and efficient operation of your Numatic NX300 Lithium Battery Charging Dock, model 911334. This charging dock is designed specifically for Numatic NX series lithium batteries, ensuring optimal performance and longevity for your equipment. Please read this manual thoroughly before use and retain it for future reference.

Émbaran Kasalametan

Always observe the following safety precautions to prevent injury or damage to the charging dock and batteries:

• Use only with genuine Numatic NX series lithium batteries.
• Ulah nyobian ngecas batré non-rechargeable.
• Ensure the charging dock is placed on a stable, flat, and non-flammable surface.
• Do not expose the charging dock to moisture, rain, or extreme temperatures.
• Jauhkeun tina jangkauan barudak sareng piaraan.
• Cabut catu daya sateuacan dibersihkeun atanapi upami unit moal dianggo salami lami.
• Do not operate the charging dock if it is damaged. Contact qualified service personnel.

Eusi pakét

Pastikeun yén sadaya item aya dina pakét anjeun:

• Numatic NX300 Lithium Battery Charging Dock (911334)
• Kabel Daya

Disetél

Follow these steps to set up your charging dock:

1. Unpack the charging dock and power cable from the packaging.
2. Place the charging dock on a clean, dry, and stable surface, away from direct sunlight or heat sources.
3. Connect the power cable to the charging dock's power input port.
4. Plug the other end of the power cable into a suitable electrical outlet. The charging dock is now ready for use.

Gambar 1: The Numatic NX300 Lithium Battery Charging Dock. This image shows the black charging dock with a prominent red and grey 'NX300' logo on its front panel. A slot for inserting the battery is visible at the top, and a small indicator light is located to the left of the logo.

Operasi

To charge a Numatic NX series lithium battery:

1. Ensure the charging dock is connected to a power supply.
2. Carefully insert the Numatic NX series lithium battery into the charging slot on the dock. Ensure it clicks securely into place.
3. The indicator light on the charging dock will illuminate to show the charging status. Typically, a solid light indicates charging, and a different color or flashing pattern indicates a full charge or an error. Refer to the specific indicator guide below.
4. Once the battery is fully charged, the indicator light will change. You may then remove the battery from the dock.

Panungtun Lampu Indikator

• Beureum padet: Ngecas lumangsung.
• Héjo padet: Batré dicas pinuh.
• Kedip-kedip Beureum: Error or fault detected. Remove battery and reinsert. If error persists, consult troubleshooting.

Model cocog

The Numatic NX300 Lithium Battery Charging Dock (911334) is compatible with lithium batteries used in the following Numatic NX series machines:

• TTB1840NX
• RSB150NX
• NBV190NX
• NBV240NX
• PBT230NX

Pangropéa

Proper maintenance ensures the longevity of your charging dock:

• beberesih: Disconnect the power cable before cleaning. Wipe the exterior of the charging dock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Panyimpenan: Store the charging dock in a cool, dry place when not in use.
• Pamariksaan: Periodically inspect the power cable and charging dock for any signs of damage.

Pamérésan masalah

If you encounter issues with your charging dock, refer to the table below:

spésifikasi

Garansi sareng Rojongan

For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Numatic website. You may also contact your local Numatic dealer or authorized service center for assistance.