Mastfuyi Digital Multimeter FY19XF User Manual

1. Bubuka

This Mastfuyi Digital Multimeter, model FY19XF, is a versatile electrical testing instrument designed for safe and precise troubleshooting of automotive and household electrical systems. It features smart burnout prevention, overload protection, and a backlit LCD screen for clear readings in various environments. This manual provides essential information for proper setup, operation, and maintenance of your device.

2. Naon dina Box

Saatos muka bungkusan, mangga pariksa yén sadaya item di handap ieu kalebet:

• Mastfuyi Digital Multimeter FY19XF
• Kabel Tés (Beureum sareng Hideung)
• K-tipe Thermocouple
• 1.5V AAA Batteries (3 pieces)
• Manual pamaké

Image: Contents of the Mastfuyi Digital Multimeter FY19XF package.

3. Setélan

3.1 Pamasangan batré

The multimeter requires 3 AAA batteries for operation. To install them:

1. Tangtukeun lokasi kompartemen batré dina tonggong alat.
2. Buka panutup kompartemen.
3. Pasangkeun 3 batré AAA, pastikeun polaritasna bener (+/-).
4. Tutup panutup kompartemen batré aman.

3.2 Sambungan Kabel Uji

Sambungan anu leres tina petunjuk tés penting pisan pikeun pangukuran anu akurat sareng aman:

1. Always remove the protective caps from the test leads before use.
2. Sambungkeun kalungguhan tés hideung kana COM Soket input (umum).
3. Connect the red test lead to the appropriate input jack based on the measurement:
• Pikeun Voltage, Resistance, Continuity, Diode, Capacitance, Frequency, and Temperature measurements, connect the red lead to the VΩHz/C/F jack.
• For Current measurements (mA), connect the red lead to the mA jack.
• For High Current measurements (10A), connect the red lead to the 10A jack.
4. Ensure both test leads are fully and securely inserted into their respective jacks.

Image: Test leads, rubber protective case, and back bracket of the multimeter.

3.3 Protective Case and Kickstand

The multimeter is equipped with a rubber protective case and an integrated kickstand:

• The rubber protective case provides enhanced durability and drop protection. Ensure it is properly fitted around the device.
• Utilize the integrated back bracket (kickstand) to prop up the multimeter for hands-free operation and improved viewing angle during measurements.

Video: This video demonstrates the unboxing, battery installation, fitting of the rubber protective case, test lead storage, and deployment of the kickstand for the Mastfuyi Digital Multimeter FY19XF.

4. Parentah Operasi

Image: Labeled diagram of the Mastfuyi Digital Multimeter FY19XF components.

4.1 Operasi Umum

To begin a measurement:

1. Turn the central rotary switch to the desired measurement function (e.g., Voltage, Résistansi, Arus).
2. The multimeter features automatic range judgment, which simplifies operation by automatically selecting the appropriate measurement range.
3. Ngagunakeun éta PILIH button to cycle through different measurement modes within a function (e.g., AC or DC voltage, different current ranges).
4. The REL button activates the relative value measurement function, allowing you to measure changes relative to a stored reference value.
5. The Hz/BL button can be used to toggle frequency measurement (if applicable to the selected function) and to activate the display backlight.
6. The TAHAN/CAHAYA button serves two purposes: a short press will hold the current reading on the display, and a long press will activate the integrated flashlight.

Image: Multimeter demonstrating backlight, flashlight, and automatic power-off.

4.2 Specific Measurements

The FY19XF multimeter supports a wide range of electrical measurements:

• DC/AC Voltage Pangukuran: Turn the rotary switch to the 'V' position. Use the SELECT button to choose between AC and DC. Connect the test leads in parallel across the component or circuit to measure voltage.
• DC/AC Current Measurement: Turn the rotary switch to the 'A' or 'mA' position. Use the SELECT button to choose between AC and DC. Connect the test leads in series with the circuit to measure current. Ensure the correct input jack (mA or 10A) is used for the expected current range.
• Ukur résistansi: Turn the rotary switch to the 'Ω' position. Connect the test leads across the component to measure its resistance.
• Pangukuran Kontinuitas: Turn the rotary switch to the continuity symbol (often shared with resistance or diode). Connect the test leads across the circuit or component. An audible beep indicates continuity (low resistance).
• Pengukuran dioda: Turn the rotary switch to the diode symbol. Connect the test leads across the diode. The display will show the forward voltage teundeun.
• Pangukuran Kapasitansi: Turn the rotary switch to the capacitance symbol. Connect the test leads across the capacitor.
• Pangukuran Frékuénsi: Turn the rotary switch to the 'Hz' position (or use the Hz/BL button in relevant modes). Connect the test leads to the signal source.
• Pangukuran Suhu: Turn the rotary switch to the '°C/°F' position. Connect the K-type thermocouple to the appropriate input jacks and place the probe on the object to be measured.
• Non-Kontak VoltagDeteksi e (NCV): Turn the rotary switch to the 'NCV' position. Bring the top of the multimeter near a live electrical source. The device will beep and indicate voltage presence without direct contact.

Gambar: Examples of various measurements performed by the multimeter.

Image: Capacitance measurement, NCV detection, and alarm indicators.

Video: This video demonstrates various operational features including function selection, backlight activation, flashlight use, and NCV induced voltage deteksi.

5. Émbaran Kasalametan

Your Mastfuyi Digital Multimeter FY19XF is designed with safety in mind. Please observe the following precautions:

• Smart Burnout Prevention and Overload Protection: The multimeter incorporates a smart burnout prevention chip with a ceramic fuse, offering full-range overload protection. It provides 250V burnout prevention if an incorrect measurement function is selected.
• Luhur Voltage Waspada: A vol tinggitage alert with a red backlit display will activate if the measured voltage exceeds 36V, indicating a potential hazard. Exercise extreme caution when this alert is active.
• Misplaced Test Leads Alarm: An audible alarm will sound if test leads are inserted into the current measurement jack without the rotary switch being set to the correct current function, preventing accidental damage to the device and potential hazards.
• Always remove the protective caps from the test leads before making any measurements.
• Do not attempt to measure AC currents or voltages below 100mV if the device cannot display results. Consult the manual for specific measurement limitations.
• Ensure the rotary switch is set to the correct function before connecting the test leads to a circuit.

Image: Multimeter highlighting internal MCU processor and dual ceramic fuse tubes for enhanced safety.

Image: High voltage alert (red backlight) and misplaced test leads alarm feature.

Image: Important operation note regarding the removal of test lead caps.

6. Pangropéa

To ensure the longevity and accuracy of your multimeter, follow these maintenance guidelines:

• Pareum Otomatis: The multimeter features an automatic power-off function after 15 minutes of inactivity to conserve battery life.
• beberesih: Jaga alat tetep bersih sareng garing. Usap bagian luarna ku kaén anu lemesamp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: Store the multimeter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
• Ngagantian batré: Ganti batréna langsung nalika indikator batré lemah némbongan dina layar pikeun mastikeun bacaan anu akurat sareng fungsi alatna leres.

7. Cara ngungkulan

If you encounter issues with your multimeter, refer to the following common troubleshooting steps:

• No Display or Incorrect Reading:
  • Check if test lead plugs are fully inserted and correctly seated in the appropriate input jacks.
  • Ensure the manual rotary switch is positioned correctly for the desired measurement function.
  • Pastikeun yén batréna gaduh muatan anu cekap.
• No AC Current or AC Voltage Reading Below 100mV: This multimeter may not be able to measure all AC currents or AC voltages below 100mV. This is a characteristic of the device.
• Alat teu hurung: Pariksa pamasangan batré sareng pastikeun batréna henteu béak. Ganti upami diperyogikeun.

8. Spésifikasi

9. Garansi jeung Rojongan

The Mastfuyi Digital Multimeter FY19XF comes with a 48-month unconditional warranty and lifetime after-sales service. For any product inquiries, technical support, or assistance, please contact our professional support team. We are available online for prompt assistance to ensure your satisfaction.