1. Produk Langkungview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Gambar 1: Hareupeun view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Eusi Paket
Punten parios yén sadaya barang aya dina pakét anjeun:
- Mesqool Vibrating Alarm Clock (CR1027)
- Kabel Ngecas USB
- Manual pangguna (dokumén ieu)
3. Tata perenah
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Gambar 2: Samping view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Setélan
4.1 Ngecas Awal
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Gambar 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Daya Hurung/Pareuman
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Parentah Operasi
5.1 Nyetél Waktos
- Pencét éta Waktos Set tombol sakali. Angka jam bakal mimiti kedip-kedip.
- Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun jam.
- Pencét Waktos Set deui. Angka menit bakal hurung.
- Ngagunakeun éta + jeung - tombol pikeun nyaluyukeun menit.
- Pencét Waktos Set a third time to confirm the time and exit the setting mode.
5.2 Nyetel Alarm (Alarm 1 sareng Alarm 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Pencét éta Alarem 1 or Alarem 2 button once. The alarm time will flash.
- Ngagunakeun éta + jeung - tombol pikeun nyetel jam alarm anu dipikahoyong.
- Pencét anu saluyu Alarem button again. The alarm minutes will flash.
- Ngagunakeun éta + jeung - tombol pikeun nyetel menit alarm anu dipikahoyong.
- Pencét anu saluyu Alarem button a third time to confirm the alarm time.
- Saatos nyetel waktos, pencét tombol Alarem button repeatedly to cycle through the available alarm modes: Ngan ukur Geter, Buzzer Ngan, jeung Vibration + Buzzer. The corresponding icon will appear on the display.
- To activate or deactivate an alarm, press the respective Alarem button until the alarm icon appears (activated) or disappears (deactivated).
Gambar 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Fungsi Tunda
When an alarm is active, press the large Snooze / Caang button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Ngeureunkeun Alarm
To stop an active alarm, press any button other than the Snooze / Caang button. The alarm will then reset for the next scheduled activation.
5.5 Nyaluyukeun Inténsitas Getaran
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Geter button (refer to Figure 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Gambar 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Kacaangan tampilan
Pencét éta Caang button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Pangropéa
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Ulah ngalaan alat ka suhu ekstrim, sinar panonpoé langsung, atawa Uap kaleuleuwihan.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Jam teu hurung. | Batré béak. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm does not sound or vibrate. | Alarm henteu diaktipkeun atanapi henteu leres disetel. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Layarna redup atanapi teu tiasa dibaca. | Tingkat kacaangan disetel handap teuing. | Pencét éta Caang button to increase the display brightness. |
| Tombol-tombol henteu ngaréspon. | glitch software samentara. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Spésifikasi
- model: CR1027
- merek: Mesqool
- Jenis tampilan: LED
- Sumber Daya: Ditenagakeun Batré (Bisa dieusi deui)
- Kapasitas batré: 3000 mah
- Ukuran produk: Approximately 3.35"W x 3.35"H x 1.06"D
- Beurat barang: 7.4 ons
- Fitur husus: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Garansi jeung Rojongan
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool website. Please retain your purchase receipt as proof of purchase for warranty claims.
Gambar 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).
