1. Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of your AERMEC AER503IR built-in thermostat. Please read this manual carefully before installation and use to ensure proper function and safety.
The AERMEC AER503IR is designed for built-in installation in a 503 box and features a touchpad control with a backlit display, specifically for air conditioning systems.
2. Émbaran Kasalametan
- Always disconnect power before installing or servicing the thermostat.
- Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
- Do not touch the electronic board with bare hands to avoid damage from electrostatic discharge.
- Ensure all wiring connections are secure and correct to prevent fire or electric shock.
- Do not overtighten the fixing screws during installation.
- Alat ieu dirarancang pikeun pamakéan jero rohangan wungkul.
3. Produk Langkungview
The AERMEC AER503IR thermostat features a clear digital display and intuitive touchpad controls for managing your air conditioning system.
Gambar 3.1: Hareupeun view of the AERMEC AER503IR thermostat, showing the digital display and touchpad controls.
Fitur konci:
- Touchpad control for easy operation.
- Layar anu dicaangkeun ka tukang pikeun pisibilitas dina rupa-rupa kaayaan cahaya.
- Designed for air conditioner specific use.
- Manual control type.
4. Pamasangan
The AERMEC AER503IR is designed for built-in installation in standard 502 (2-module) and 503 (3-module) flush-mounted boxes. Follow these steps for proper installation:
- Pastikeun daya dina pemutus sirkuit utama geus dicabut sateuacan ngamimitian pamasangan.
- Open the AER503IR accessory using a flat-head screwdriver as shown in the diagram.
- Carefully remove the protective film from the display after installation is complete.
- Mount the thermostat into the chosen flush-mounted box (502, 503, or round 2-module box) using the provided screws. Ensure the "ALTO-UP" indicator is facing upwards.
- Connect the wiring according to the wiring diagram in Section 5.
- Secure the thermostat firmly but do not overtighten the fixing screws.
Figure 4.1: Installation steps for the AERMEC AER503IR thermostat into various flush-mounted boxes (502, 503, and round 2-module). Note the "ALTO-UP" orientation and the use of a screwdriver to open the unit.
5. Diagram Kabel
Refer to the following diagram for electrical connections (I/O characteristics). Ensure all connections are made correctly before restoring power.
Figure 5.1: Electrical wiring diagram for the AERMEC AER503IR thermostat, detailing input/output connections for fan speed control, valve control, power supply, and sensor inputs.
Titik Sambungan:
- N: Neutral input for power supply and valves.
- L: Line input for power supply.
- PE: Power supply ground.
- Y2, Y1, V1, V2, V3: Outputs for fan speed control (minimum, medium, maximum) and valve control (2-pipe, 4-pipe, resistance/Coldplasma).
- DC1, DC2: Analog outputs (0-10Vdc) for inverter fan control and modulating valve control.
- SA: Additional ambient probe input.
- GND: Ground for additional ambient probe and water probe.
- SW: Water probe input.
- CE1, CE2: Multifunction input (refer to dedicated chapter for functions).
6. Setup Awal
After successful installation and power restoration, the thermostat will power on. The backlit display will illuminate. Follow the on-screen prompts or refer to the full product manual for detailed initial configuration steps, including setting the current time, day, and desired temperature range.
- Daya Hurung: Once wired correctly and power is supplied, the thermostat display should light up.
- Setélan Dasar: Use the touchpad controls to navigate through the menu. Typically, you will need to set the current time, day of the week, and desired temperature setpoints for heating and cooling modes.
- Pilihan Mode: Select the operating mode (e.g., Cool, Heat, Auto, Fan Only) as required for your air conditioning system.
7. Operasi
The AERMEC AER503IR thermostat is operated via its integrated touchpad. The backlit display provides clear feedback on current settings and status.
Kontrol dasar:
- Penyesuaian Suhu: Use the up/down arrows on the touchpad to adjust the desired temperature setpoint.
- Pilihan Mode: Press the mode button to cycle through available operating modes (e.g., Cooling, Heating, Fan, Auto).
- Laju kipas: If applicable, use the fan button to select desired fan speed (e.g., Low, Medium, High, Auto).
- Lampu tukang tampilan: The display is backlit for easy viewing.
For advanced programming features, such as scheduling or specific fan operations, please consult the detailed product manual provided with your thermostat.
8. Pangropéa
The AERMEC AER503IR thermostat requires minimal maintenance to ensure optimal performance and longevity.
- beberesih: Gently wipe the display and touchpad with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface or internal components.
- Ngaleungitkeun lebu: Periodically, gently dust the vents (if any) to ensure proper airflow and temperature sensing.
- Ngagantian batré: If your model is battery-powered, replace batteries when the low battery indicator appears on the display. Use the specified battery type.
- Pamariksaan profésional: It is recommended to have your HVAC system and thermostat inspected by a qualified technician annually to ensure efficient operation.
9. Cara ngungkulan
If you encounter issues with your AERMEC AER503IR thermostat, refer to the following common problems and solutions. For more complex issues, contact customer support.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pintonan termostat kosong. | No power supply; loose wiring; dead batteries (if applicable). | Check circuit breaker. Verify wiring connections. Replace batteries. |
| Sistem henteu ngaréspon kana setélan termostat. | Incorrect mode selected; wiring issue; system malfunction. | Ensure correct mode (Cool/Heat/Auto). Check wiring. Consult HVAC technician. |
| Maca suhu sigana teu akurat. | Thermostat located near heat source/draft; sensor issue. | Ensure thermostat is not exposed to direct sunlight or drafts. Contact support if issue persists. |
| Touchpad unresponsive. | Temporary glitch; physical damage. | Try cycling power to the thermostat. If damaged, contact support for replacement. |
10. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | AERMEC |
| Ngaran modél | Termostato AER503IR |
| Nomer Modél Item | TX |
| Warna | Bodas |
| Voltage | 230 volt |
| Fitur husus | Lampu tukang |
| Item Beurat | 1 Kilogram |
| Tipe Controller | Kontrol Manual |
| Kagunaan Produk Husus | AC |
| Tipe Kontrol Suhu | Digital |
| Komponén Kaasup | Kotak pamasangan |
| Sumber Daya | Batré Powered |
| Ukuran Paket | 20 x 10 x 10 cm |
Catetan: Spésifikasi tiasa robih tanpa aya bewara.
11. Garansi jeung Rojongan
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official AERMEC websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
Inpormasi kontak: Mangga tingal resmi produsén urang website or your local distributor for contact details regarding customer service and technical assistance.
