1. Bubuka
This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.
Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).
2. Émbaran Kasalametan penting
Always observe the following safety precautions to prevent injury or damage to the device and vehicle:
- Baca sadaya parentah sateuacan dianggo.
- Do not operate the jump starter if the cables or clamps ruksak.
- Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
- Do not jump start vehicles with battery voltage lian ti 12V.
- Jauhkeun tina jangkauan barudak.
- Do not expose to rain or extreme temperatures.
- Do not use the tire inflator for purposes other than inflating tires or compatible items.
- Avoid over-inflating tires; always check recommended PSI.
3. Produk Langkungview
3.1 GOOLOO GT4000S Jump Starter
- Puncak Arus: 4000A
- Kasaluyuan mesin: Up to 12.0L Gasoline, 10.0L Diesel
- Ngecas: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
- Kaluaran: Up to 100W for charging MacBooks and other laptops (Type-C port only).
- Kahirupan batré: Up to 60 jumpstarts on a single full charge.
- Kasaluyuan: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.
Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.
3.2 GOOLOO GT150 Inflator Ban
- Tekanan Max: 150 PSI
- Laju Inflasi: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
- Fitur: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
- Kasaluyuan: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.
Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.
4. Setup jeung Ngecas
4.1 Charging the GT4000S Jump Starter
- Connect the provided USB-C cable to the jump starter's Type-C input port.
- Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
- The display will show the charging wattage jeung batré persentage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.
Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.
4.2 Ngecas Inflator Ban GT150
The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.
Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.
5. Parentah Operasi
5.1 Using the GT4000S Jump Starter
- Ensure the jump starter is sufficiently charged (above 20%).
- Sambungkeun kabel jumper clamps to the jump starter unit.
- Gantelkeun cl beureumamp ka positif (+) terminal batré kandaraan jeung cl hideungamp ka terminal négatip (-).
- Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
- If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
- Hurungkeun mesin kandaraan anjeun dina 30 detik.
- Sakali kendaraan dihurungkeun, langsung cabut konci naamps from the car battery, then disconnect them from the jump starter.
Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.
5.2 Ngagunakeun Inflator Ban GT150
- Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
- Turn on the GT150. The LED screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
- Disconnect the air hose and store the unit.
Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.
6. Pangropéa sareng Panyimpenan
- Store the units in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
- Clean the units with a dry, soft cloth. Do not use harsh chemicals.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Jump Starter not turning on | Low battery or faulty unit | Charge the unit fully. If issue persists, contact support. |
| "READY" not displayed (GT4000S) | Incorrect connection or battery too low | Pariksa clamp connections. Use "BOOST" function for completely dead batteries. |
| Tire Inflator not working (GT150) | Low battery, hose not connected properly | Charge the unit. Ensure hose is securely attached to tire valve. |
8. Spésifikasi
GOOLOO GT4000S Luncat Starter
- Puncak Amperage: 4000A
- Voltage: 12V
- Jenis Batré: Litium-ion
- Input ngecas: USB-C (100W Max)
- Kaluaran USB: USB-C (100W Max), USB-A (various outputs)
GOOLOO GT150 Tire Inflator
- Tekanan Max: 150 PSI
- Sumber Daya: Cordless (Internal Battery)
- tampilan: Layar LED Ultra Caang
9. Garansi jeung Rojongan
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.
