1. Bubuka sarta Émbaran Kasalametan
This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Einhell TC-SB 245 L Bandsaw. Read all instructions carefully before use to prevent injury and ensure proper function.
Warnings Kasalametan Umum
- Salawasna nganggo alat pelindung diri (APD) anu merenah, kalebet kacamata pengaman, pelindung dédéngéan, sareng masker lebu.
- Pastikeun wewengkon gawé beresih, cahayana alus, sarta bebas tina halangan.
- Jauhkeun barudak sareng anu aya di sakitarna tina mesin anu nuju dioperasikeun.
- Cabut catu daya sateuacan ngadamel pangaluyuan, ngaganti asesoris, atanapi ngalaksanakeun pangropéa.
- Never operate the bandsaw with guards removed or damaged.
- Use the provided push bar for feeding small workpieces to maintain a safe distance from the blade.
- Ensure the safety switches on the machine's access doors are functioning correctly. The machine will not start if these doors are not securely closed.
2. Produk Langkungview
The Einhell TC-SB 245 L Bandsaw is designed for precise cutting of various materials, primarily wood. It features a robust induction motor and a stable design for consistent performance.
Gambar 2.1: Leuwihview of the Einhell TC-SB 245 L Bandsaw, showcasing its red and black housing, saw table, and blade assembly.
Fitur konci
- Large, Stable Desk: The aluminum work table provides a generous working surface with a 245 mm gap width, suitable for medium-sized workpieces.
- Lampu LED terpadu: Illuminates the work area for improved visibility during operation.
- Infinitely Adjustable Tilting Saw Table: Allows for precise miter cuts.
- Adjustable Angled Fence: Ensures flexibility and accuracy for various cutting angles.
- Tool-Free Saw Blade Change: Simplifies blade replacement.
- Durable Induction Motor: Provides strong pulling force, operates smoothly, and requires minimal maintenance.
- Safety Push Bar: Included for safe material handling.
Gambar 2.2: Detil view of the saw table, blade, and adjustable fence, highlighting the precision components.
3. Setélan
3.1 Ngabongkar jeung Majelis
- Sacara saksama miceun sadaya komponén tina bungkusan.
- Inspect all parts for damage. Do not use the machine if any parts are damaged.
- Assemble the stand (if applicable) and securely mount the bandsaw. Ensure the machine is stable on a level surface.
3.2 Saw Blade Installation/Change
The Einhell TC-SB 245 L features a tool-free saw blade change mechanism.
Gambar 3.1: Example of bandsaw blades, illustrating the type of blade used with this machine.
- Pegatkeun kakuatan: Always unplug the machine before changing the blade.
- Open access doors: Unlock and open the upper and lower access doors to expose the blade wheels.
- Release blade tension: Use the tension knob (usually located at the top) to loosen the blade.
- Remove old blade: Carefully remove the old blade from the wheels and blade guides.
- Install new blade: Place the new blade onto the wheels, ensuring the teeth are pointing downwards towards the table. Guide the blade through the upper and lower blade guides.
- Tension blade: Adjust the tension knob until the blade is properly tensioned. Refer to the markings or a tension gauge if available.
- Adjust blade tracking: Rotate the upper wheel by hand to check blade tracking. Adjust the tracking knob (if present) until the blade runs centrally on the wheels.
- Close access doors: Securely close both access doors. The machine will not operate if these doors are not fully closed due to integrated safety switches.
3.3 Adjusting the Saw Table and Fence
Image 3.2: Illustration of the saw table tilting mechanism, indicating its adjustable range for miter cuts.
- Tilting Saw Table: Loosen the locking knob beneath the table to adjust the tilt angle. Use the angle scale for precise settings. Tighten the knob firmly once the desired angle is set.
- Angled Fence: The fence can be adjusted along the table for parallel cuts. Loosen its locking mechanism, slide it to the desired position, and secure it. The fence can also be angled for specific cuts.
Gambar 3.3: Deukeut view of the adjustable angled fence, showing its positioning and locking mechanism.
4. Operasi
4.1 Mimitian jeung Ngeureunkeun
- Ensure all safety guards are in place and access doors are closed.
- Sambungkeun mesin ka stop kontak anu cocog.
- Press the green 'ON' button to start the bandsaw.
- Press the red 'OFF' button to stop the bandsaw.
4.2 Prosedur Motong
Image 4.1: A user demonstrating the proper technique for cutting a wooden workpiece on the bandsaw.
- Nyiapkeun workpiece: Mark your cut line clearly on the material.
- Saluyukeun Pituduh Bilah: Position the upper blade guide assembly so it is approximately 3-6 mm (1/8-1/4 inch) above the workpiece.
- Mimitian Mesin: Turn on the bandsaw and allow the blade to reach full speed before beginning the cut.
- Bahan Pakan: Gently feed the workpiece into the blade, following your marked line. Use the push bar for smaller pieces or when hands are close to the blade. Maintain a steady, even pressure.
- Ngagunakeun Lampu LED: The integrated LED light can be switched on to improve visibility of the cutting line.
Image 4.2: The integrated LED light providing illumination to the cutting area for enhanced precision.
5. Pangropéa
Regular maintenance ensures the longevity and safe operation of your bandsaw.
5.1 beberesih
- Pegatkeun kakuatan: Salawasna cabut colokan mesin saméméh beberesih.
- ékstraksi lebu: The bandsaw is equipped with a dust extraction port. Connect a suitable dust extractor or shop vacuum to this port during operation to minimize sawdust accumulation.
Image 5.1: Demonstrating the connection of a vacuum hose to the bandsaw's dust extraction port for efficient chip removal.
- beberesih umum: Use a brush or compressed air to remove sawdust and debris from the table, blade guides, and motor vents. Do not use solvents that could damage plastic parts.
5.2 Inspection agul jeung ngagantian
- Regularly inspect the blade for sharpness, cracks, or missing teeth. A dull or damaged blade can lead to poor cuts and increased risk of kickback.
- Replace worn or damaged blades promptly following the instructions in Section 3.2.
6. Cara ngungkulan
This section addresses common issues you might encounter with your bandsaw.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin teu ngamimitian | Power cord not plugged in; Safety access doors not closed; Faulty power switch. | Check power connection; Ensure all access doors are securely closed; Contact service if switch is faulty. |
| Mata pisauna ngarayap atawa motongna teu akurat | Dull blade; Incorrect blade tension; Improperly adjusted blade guides; Incorrect blade tracking. | Replace blade; Adjust blade tension; Adjust blade guides; Adjust blade tracking. |
| Geter atawa noise kaleuleuwihan | Loose components; Damaged blade; Unbalanced wheels. | Check all fasteners; Replace damaged blade; Contact service for wheel balancing. |
If you encounter problems not listed here or if solutions do not resolve the issue, contact Einhell customer support.
7. Spésifikasi
Technical data for the Einhell TC-SB 245 L Bandsaw (Model 4308036).
| Fitur | Rincian |
|---|---|
| Nomer modél | 4308036 |
| Produsén | Einhell |
| Item Beurat | 24.6 kg |
| Dimensi produk | 53.5 x 42 x 83.5 cm |
| Sumber Daya | Kabel Listrik |
| Bahan cecekelan | alumunium |
| Bahan Sabeulah | Carbon Steel (Kohlenstoffstahl) |
| Fitur husus | Brushless (Bürstenlos) |
| Komponén Kaasup | Alat bulistir |
8. Garansi jeung Rojongan
For warranty information, please refer to the warranty card included with your product or visit the official Einhell websitus. Simpen resi pameseran anjeun salaku bukti pameseran.
For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Contact details can typically be found on the Einhell websitus atanapi dina dokuméntasi produk Anjeun.
