Daitsu ACD36KDBS Ducted Air Conditioner User Manual

1. Bubuka

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Daitsu ACD36KDBS Ducted Air Conditioner. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

2. Émbaran Kasalametan penting

Salawasna turutan pancegahan kaamanan dasar nalika nganggo alat-alat listrik pikeun ngirangan résiko kahuruan, kejutan listrik, sareng tatu pikeun jalma.

• Pamasangan kedah dilakukeun ku tanaga anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
• Pastikeun catu daya cocog sareng spésifikasi anu didaptarkeun dina pelat nami unit.
• Ulah ngoperasikeun alat ieu nganggo leungeun baseuh atanapi nalika nangtung dina permukaan anu baseuh.
• Ulah ngasupkeun ramo atawa objék kana inlet / outlet hawa.
• Upami kabel listrik ruksak, éta kedah digentos ku produsén, agén jasa, atanapi jalma anu mumpuni anu sami pikeun nyegah bahaya.
• This appliance uses R32 refrigerant. Refer to local regulations for handling and disposal.

3. Produk Langkungview

The Daitsu ACD36KDBS is a high-efficiency ducted air conditioning system designed for centralized climate control. It consists of an indoor ducted unit, an outdoor condenser unit, and a remote control for convenient operation.

This image displays the complete Daitsu ACD36KDBS ducted air conditioning system. At the top, the indoor ducted unit is shown, designed to be concealed within ceilings or walls, distributing conditioned air through ducts. Below it, the outdoor condenser unit is visible, featuring a large fan grille on its front. This unit is responsible for heat exchange with the outside air. To the right of the outdoor unit, the wireless remote control is depicted, showing its digital display and various function buttons for controlling the system.

3.1. komponén

• Unit Saluran Indoor: Installed within the ceiling or wall space, connected to ductwork for air distribution.
• Unit Kondensor Luar Ruangan: Placed outside, responsible for heat rejection or absorption.
• Kadali Jauh Nirkabel: Used to adjust settings, modes, and fan speed.

4. Setup jeung Instalasi

Installation of the Daitsu ACD36KDBS ducted air conditioner requires professional expertise. It is highly recommended that a certified HVAC technician performs the installation to ensure proper functioning, safety, and compliance with all relevant regulations.

4.1. Cék Pra-Pamasangan

• Verify that the installation site meets the required clearances and structural support for both indoor and outdoor units.
• Ensure adequate power supply is available and correctly rated for the unit's electrical requirements.
• Confirm that all necessary tools, materials, and safety equipment are on hand.

4.2. Instalasi Unit jero rohangan

1. Mount the indoor unit securely in the designated ceiling or wall cavity, ensuring it is level.
2. Connect the refrigerant piping, condensate drain line, and electrical wiring according to the wiring diagram provided with the unit.
3. Install the ductwork system, ensuring proper sealing and insulation to prevent air leakage and energy loss.

4.3. Instalasi Unit Luar

1. Place the outdoor unit on a stable, level surface, ensuring sufficient clearance for airflow around the unit.
2. Connect the refrigerant piping and electrical wiring between the indoor and outdoor units.
3. Perform a vacuum evacuation of the refrigerant lines to remove air and moisture.
4. Charge the system with the correct amount of R32 refrigerant as specified by the manufacturer.

4.4. Sambungan listrik

All electrical connections must comply with local and national electrical codes. Ensure proper grounding and circuit breaker protection. Refer to the unit's wiring diagram for specific connection points and voltage requirements (2.3E+2 Volts AC).

5. Parentah Operasi

Your Daitsu ACD36KDBS air conditioner can be controlled using the provided wireless remote control.

5.1. Fungsi Jauh Jauh

• Tombol Daya: Hurungkeun unit HIRUP / OFF.
• Tombol Mode: Bisa dipindah-pindah mode operasi: Otomatis, Tiis, Garing, Kipas, Panas.
• Tombol Pangaturan Suhu (+/-): Ngaronjatkeun atawa nurunkeun suhu set.
• Tombol Laju Kipas: Saluyukeun laju kipas (Otomatis, Lemah, Sedeng, Luhur).
• Tombol ayun: Activates/deactivates the automatic air swing function.
• Tombol Timer: Nyetél ON / OFF timers pikeun operasi dijadwalkeun.
• Function/Enter Button: Accesses additional functions or confirms settings.

5.2. Modeu Operasi

• Mode tiis: Pikeun niiskeun rohangan. Setel suhu anu dipikahoyong.
• Modeu Panas: For heating the room (if applicable, this model has an inverter compressor, suggesting heating capability). Set desired temperature.
• Mode garing: Ngurangan kalembaban di rohangan.
• Modeu kipas: Sirkulasi hawa tanpa pemanasan atawa cooling.
• Modeu Otomatis: The unit automatically selects the appropriate mode (Cool/Heat/Fan) based on the room temperature and set temperature.

6. Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur AC anjeun.

6.1. Filter hawa beberesih

The Daitsu ACD36KDBS uses a standard air filter. Clean the air filter every two weeks or more frequently depending on usage and air quality.

1. Turn off the unit and disconnect power before cleaning.
2. Locate and remove the air filter from the indoor unit.
3. Clean the filter using a vacuum cleaner or wash it with lukewarm water and mild detergent.
4. Rinse thoroughly and allow the filter to dry completely in a shaded area before reinserting.

6.2. Pabersihan Unit Luar Ruangan

Periodically clean the outdoor unit's coil and fan blades to remove dirt, leaves, and debris. Ensure the power is off before cleaning.

6.3. Palayanan profésional

Disarankeun pikeun ngalayanan AC anjeun sacara profésional sahenteuna sataun sakali ku teknisi anu mumpuni. Ieu kalebet mariksa tingkat refrigeran, sambungan listrik, sareng kinerja sistem sacara umum.

7. Cara ngungkulan

Sateuacan ngahubungi layanan palanggan, mangga tingal masalah umum di handap ieu sareng solusina.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your Daitsu dealer. The product is typically covered by a manufacturer's warranty against defects in materials and workmanship.

For technical support, spare parts, or service inquiries, please contact your authorized Daitsu service center or the retailer from whom you purchased the unit. Please have your model number (ACD36KDBS / S0449768) and purchase date ready when contacting support.

Inpormasi ngeunaan kasadiaan suku cadang ayeuna teu sayogi.