TWIG 2024072304

TWIG Farmhouse Chandelier 6-Light Installation and User Manual

Modél: 2024072304

1. Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of your TWIG Farmhouse Chandelier 6-Light fixture. Designed for dining rooms and kitchen islands, this fixture combines vintage solid wood, matte black metal, and clear cylinder glass shades to create a warm and elegant lighting atmosphere. Please read this manual thoroughly before beginning installation or use.

TWIG Farmhouse Chandelier 6-Light installed over a dining table

Image 1.1: The TWIG Farmhouse Chandelier 6-Light fixture installed above a dining table, showcasing its rustic design with wood accents and clear glass shades.

2. Émbaran Kasalametan

3. Eusi Paket

Carefully unpack all components and inspect for any damage. Retain all packaging materials until you are satisfied with the product. The fixture is 95% pre-assembled for ease of installation.

4. Spésifikasi

merekTWIG
Nomer modél2024072304
Dimensions (L x W x Max H)42 "L x 5" W x 46" H
Rentang Jangkungna adjustableMinimum 23", Maximum 45.7" (as per diagram)
BahanKaca, Logam, Kayu
WarnaMatte Black (Metal), Clear (Glass), Wood (Antique Painted)
Jumlah Lampu6
Dasar BulbE26
Max Wattage per Bohlam60W (40W recommended)
Voltage120 volt
Tipe PamasanganSemi siram Gunung
Pamakéan jero rohangan / outdoorjero rohangan
Diagram showing dimensions of the TWIG Farmhouse Chandelier 6-Light, including length, width, height, and adjustable rod lengths.

Image 4.1: Detailed dimensions of the chandelier and its adjustable suspension rods, indicating a maximum height of 45.7 inches and a minimum of 23 inches.

5. Setup jeung Instalasi

The fixture is 95% assembled. Only a simple assembly and electrical installation are required.

  1. Lengkah 1: Nyiapkeun pikeun Instalasi
    • Pareuman kakuatan dina pemutus sirkuit atanapi kotak sekering.
    • Ensure the mounting surface is structurally sound to support the fixture's weight.
  2. Lengkah 2: Gantelkeun Bracket Pemasangan
    • Secure the mounting bracket to the junction box in the ceiling using the provided screws.
  3. Step 3: Adjust Suspension Rods
    • Determine the desired hanging height. The fixture's height can be adjusted from 23 inches to 45.7 inches using the provided rods.
    • Attach the appropriate length of suspension rods to the chandelier body and the ceiling canopy.
  4. Lengkah 4: Sambungan Listrik
    • Connect the fixture's wires to the house wiring:
      • Sambungkeun kabel hideung (anu nyambung) tina stop kontak ka kabel hideung tina kotak sambungan.
      • Sambungkeun kabel bodas (nétral) tina fixture ka kabel bodas tina kotak sambungan.
      • Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting bracket).
    • Secure connections with wire connectors.
  5. Hambalan 5: Pasang fixture
    • Carefully lift the chandelier and attach the ceiling canopy to the mounting bracket, securing it with the decorative nuts.
  6. Lengkah 6: Pasang Bulbs
    • Screw E26 base bulbs (not included) into each socket. Do not exceed 60W per bulb; 40W is recommended.
Diagram illustrating the 5-step installation process for the chandelier, showing mounting bracket, wiring, and final assembly.

Image 5.1: Installation diagram for the TWIG Farmhouse Chandelier, detailing steps from preparing the electrical box to mounting the fixture.

6. Parentah Operasi

Once installed and bulbs are in place, restore power at the circuit breaker. The chandelier operates via a standard wall switch (toggle switch type). If connected to a dimmer switch, ensure the bulbs are compatible with dimming functionality.

7. Pangropéa

8. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Lampu henteu hurung.
  • Daya pareum dina pemutus sirkuit.
  • Sambungan kawat leupas.
  • Bohlam nu rusak.
  • Saklar témbok pareum.
  • Check circuit breaker and restore power.
  • Turn off power, check and secure all wire connections.
  • Replace bulb(s) with new ones.
  • Ensure wall switch is in the "ON" position.
Kedip-kedip lampu.
  • Bohlam leupas.
  • Saklar dimmer atanapi bohlam anu teu cocog.
  • Sambungan kawat leupas.
  • Tighten bulb securely.
  • Pastikeun dimmer sareng bohlam cocog.
  • Turn off power, check and secure wire connections.
Fixture smells after installation.
  • New product odor from protective coatings.
  • Ensure adequate ventilation in the room. The odor should dissipate over time.

9. Rojongan Palanggan

For any questions, concerns, or assistance with your TWIG Farmhouse Chandelier, please contact our customer support team. We are committed to providing timely responses and solutions.

Dokumén Patali - 2024072304

Praview TWIG Embody: Wearable Personal Safety Alarm
TWIG Embody is a versatile wearable personal safety alarm device designed for lone worker safety and personal security. It offers advanced features like ManDown++, SOS alerts, two-way voice communication, and precise location tracking, with various wearable options for different risk situations.
Praview TWIG Eon D: The Connected Safety Watch for Lone Workers | Datasheet
Detailed information on the TWIG Eon D, a connected safety watch designed for lone workers, featuring SOS alerts, real-time location tracking, long battery life, and advanced communication capabilities.
Praview TWIG Neo Ex: Compact ATEX Lone Worker Alarm | Technical Specifications
Discover the TWIG Neo Ex, a compact and wearable ATEX/IECEx certified lone worker alarm for hazardous environments. Features include man-down detection, emergency alerts, hybrid indoor/outdoor location, and remote management.
Praview TWIG One Ex / TWIG Neo Ex Safety Instructions and Precautions
Comprehensive safety instructions, precautions, and maintenance guidelines for the TWIG One Ex and TWIG Neo Ex intrinsically safe personal alarm devices, designed for industrial use in explosive atmospheres. Covers operational safety, fault handling, and regulatory compliance.
Praview Nelson TWIG-V PLUS / SE: Solar-Powered Wireless Irrigation Valve Controller
Komprehensif leuwihview of the Nelson TWIG-V PLUS and TWIG-V PLUS SE, solar-powered radio (RTU) controllers with integrated solenoids for wireless irrigation valve management. Features include LoRa and Bluetooth connectivity, long battery life, and quick response times.