Buku Panduan Pangguna Lampu Taktis Klarus GL2

1. Bubuka

Hatur nuhun pikeun meuliasing the Klarus GL2 Tactical Light. This compact and powerful rail-mounted pistol light is designed for optimal performance and reliability. Featuring 1000 lumens of bright LED illumination and a green laser, it is compatible with both Glock and 1913 Picatinny rails, making it a versatile accessory for various firearms. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Eusi pakét

• Klarus GL2 Tactical Light
• Kabel Ngecas USB
• Diwangun-di Batré Rechargeable
• Manual pamaké

Figure 1: The Klarus GL2 Tactical Light, showcasing its compact design, integrated green laser, and powerful LED light output. The light is shown emitting both a bright white beam and a distinct green laser dot.

2. Parentah Kasalametan

Salawasna merhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:

• Kasalametan laser: Do not stare directly into the laser beam or point it at people or animals. The laser is a Class 3R laser product.
• Kasalametan cahaya: Do not shine the LED light directly into eyes. The high lumen output can cause temporary vision impairment.
• Panas: The light may become warm during prolonged use at high output levels. This is normal.
• Batré: Use only the integrated rechargeable battery. Do not attempt to replace or modify the battery.
• Tahan cai: While the GL2 is water-resistant, it is not designed for submersion. Avoid prolonged exposure to water.
• Barudak: Jauhkeun tina jangkauan barudak.

3. Setélan

3.1 Ngecas Batré

The Klarus GL2 features a built-in rechargeable battery. Before first use, fully charge the device.

1. Locate the USB charging port on the side of the GL2.
2. Open the protective rubber cover of the USB port.
3. Connect the provided USB charging cable to the GL2 and a standard USB power source (e.g., computer, wall adapter).
4. The charging indicator light will illuminate during charging. It will change color or turn off when charging is complete.
5. Sakali dicas pinuh, pegatkeun sambungan kabel jeung aman nutup panutup karét pikeun ngajaga lalawanan cai.

3.2 Pemasangan Rel

The GL2 is designed for quick and secure attachment to Glock and 1913 Picatinny rails.

1. Pastikeun senjata api teu dimuat sareng aman sateuacan dianggo.
2. Leupaskeun rel clamp screw on the GL2 until the clamp opens sufficiently.
3. Align the GL2's rail clamp with the accessory rail on your firearm.
4. Slide the GL2 onto the rail until it seats firmly against the recoil lug.
5. Kencangkeun rel clamp screw securely by hand. Do not overtighten.
6. Verify that the GL2 is firmly attached and does not wobble.

4. Parentah Operasi

The Klarus GL2 features ambidextrous switches for easy operation.

4.1 Pungsi Pindah

• Sakedap Hurung: Pencét terus tahan salah sahiji saklar. Lepaskeun pikeun mareuman.
• Konstan On: Single click either switch to turn on. Single click again to turn off.
• Modeu Strobe: Double-click either switch rapidly to activate strobe. Single click to turn off.

4.2 Mode Selection (Light Only, Laser Only, Light + Laser)

The GL2 allows you to select between light only, laser only, or light and laser combined modes.

1. With the device off, press and hold duanana switches simultaneously for approximately 3 seconds.
2. The GL2 will cycle through the modes: Light Only → Laser Only → Light + Laser.
3. Release both switches when the desired mode is active. The device will remember the last selected mode.

4.3 adjustment laser

The laser can be adjusted for windage and elevation using the provided adjustment tool (not included, typically a small hex key).

• Locate the small adjustment screws on the side and bottom of the laser module.
• Use a suitable hex key to turn the screws for fine adjustments.
• Penyesuaian Windage: Turn the side screw to move the laser left or right.
• Penyesuaian élévasi: Turn the bottom screw to move the laser up or down.
• Perform adjustments in a safe environment, following proper firearm safety procedures.

5. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Klarus GL2.

• beberesih: Wipe the body of the light with a soft, damp lawon. Ulah make bahan kimia kasar atawa abrasives.
• Perawatan lensa: Clean the LED lens and laser aperture with a lens cleaning cloth or cotton swab. Avoid scratching the surfaces.
• Port ngecas: Keep the USB charging port clean and free of debris. Ensure the rubber cover is securely closed when not charging.
• Panyimpenan: Store the GL2 in a cool, dry place away from direct sunlight and extreme temperatures.

6. Cara ngungkulan

7. Spésifikasi

8. Garansi jeung Rojongan

Klarus products are manufactured with high-quality materials and craftsmanship. For warranty information and customer support, please refer to the official Klarus websitus atanapi hubungi dealer resmi anjeun.

Official Klarus Websitus: www.klaruslight.com

For technical assistance or service inquiries, please have your product model and purchase date available.