Einhell TE-CD 18/44 Li-i Cordless Hammer Drill User Manual

1. Bubuka

Thank you for choosing the Einhell TE-CD 18/44 Li-i Cordless Hammer Drill. This powerful and versatile tool is designed for a wide range of drilling and screwdriving tasks, including hammer drilling into masonry. As part of the Einhell Power X-Change family, it offers exceptional flexibility with interchangeable batteries and chargers across the entire system. Please read this manual carefully before operating the tool to ensure safe and efficient use. Keep this manual for future reference.

Figure 1: Einhell TE-CD 18/44 Li-i Cordless Hammer Drill with 2.5 Ah Battery and Charger

2. Parentah Kasalametan

Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Familiarize yourself with the controls and proper use of the tool before operation.

• Anggo alat pelindung pribadi (PPE) anu cocog sapertos kacamata kaamanan, panyalindungan dédéngéan, sareng sarung tangan.
• Jaga wewengkon gawé anjeun beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngocorkeun kacilakaan.
• Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Ensure the battery pack is fully charged and properly inserted before use.
• Ngamankeun workpiece nu. Paké clamps atawa vise pikeun nahan workpiece pageuh.
• Hindarkeun ngamimitian anu teu dihaja. Pastikeun saklar dina posisi pareum samemeh nyambung ka pak batré, nyokot atawa mawa alat.
• Jaga alat-alat kalayan ati-ati. Tetep motong alat anu seukeut sareng bersih.
• Pegatkeun sambungan pak batré tina alat saméméh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen parabot kakuatan.

3. Eusi Paket

Saatos ngabongkar bungkusan, mangga pariksa yén sadaya barang anu didaptarkeun di handap aya sareng henteu ruksak:

• 1 x Einhell TE-CD 18/44 Li-i Cordless Hammer Drill
• 1 x Power X-Change 2.5 Ah Battery
• 1 x Rapid Charger

If any components are missing or damaged, please contact your retailer or Einhell customer service.

4. Fitur Produk

The Einhell TE-CD 18/44 Li-i Cordless Hammer Drill is engineered with several key features for optimal performance and user convenience:

• Sistem Power X-Change: This drill is part of the Power X-Change family, allowing batteries and chargers to be freely interchanged with other tools in the series.
• Powerful 2-Speed Gearbox: Equipped with a robust two-speed transmission, the tool delivers 44 Nm of torque and 21 torque settings for efficient drilling and screwdriving.
• 13 mm Metal Keyless Chuck: The sturdy single-sleeve metal keyless chuck allows for quick and easy accessory changes.
• Kontrol Speed ​​éléktronik: The integrated electronic speed control enables optimal adaptation to various materials and applications, ensuring precise results.
• Lampu LED terpadu: An integrated LED light provides optimal visibility in dark work areas, enhancing precision during drilling and screwdriving.
• Desain ergonomis: The ergonomic design and soft-grip surfaces ensure a firm and comfortable hold, even during extended use.
• Klip sabuk: A practical belt clip allows for quick and secure attachment of the tool to your belt.

Figure 2: Key Features of the Einhell TE-CD 18/44 Li-i

Figure 3: Einhell Power X-Change Family Compatibility

Figure 4: Internal Structure of a Power X-Change Battery

5. Setélan

5.1. Ngecas Batré

Before first use, fully charge the 2.5 Ah Power X-Change battery. Connect the charger to a suitable power outlet and insert the battery pack. The charger's indicator lights will show the charging status. A full charge typically takes approximately 50 minutes.

5.2. Nyelapkeun/Nyabut Pakét Batré

• nyelapkeun: Slide the charged battery pack into the base of the drill handle until it clicks securely into place.
• Ngahapus: Press the release button on the battery pack and slide it out of the drill handle.

Gambar 5: Batré jeung carjer

5.3. Attaching/Removing Drill Bits or Screwdriver Bits

The drill features a 13 mm metal keyless chuck for easy bit changes.

• ngalampirkeun: Rotate the chuck collar counter-clockwise until the jaws are open wide enough to insert the bit. Insert the bit fully into the chuck. Rotate the chuck collar clockwise to tighten the jaws firmly around the bit.
• Ngahapus: Rotate the chuck collar counter-clockwise to loosen the jaws and remove the bit.

Figure 6: 13mm Metal Keyless Chuck

6. Parentah Operasi

6.1. Milih Modeu Operasi

The drill offers three operating modes: screwdriving, drilling, and hammer drilling. Rotate the mode selector ring located behind the chuck to choose the desired function:

• Screwdriving (○): For driving and removing screws. Use the torque setting ring for appropriate torque.
• Drilling (△): For drilling into wood, plastic, and metal.
• Hammer Drilling (□): Pikeun pangeboran kana masonry jeung beton.

Figure 7: Function Selector Ring

6.2. Nyetel torsi jeung Speed

• Ring Setélan Torsi: For screwdriving, adjust the torque setting ring (1-21) to prevent over-tightening or stripping screws. Higher numbers indicate higher torque.
• Switch Pamilih Speed: Use the 2-speed selector switch on top of the drill to choose between low speed (1) for high torque applications (e.g., screwdriving, large diameter drilling) and high speed (2) for faster drilling.
• Variabel Speed ​​pemicu: The trigger switch provides variable speed control. Pressing the trigger further increases the speed.

6.3. Maju / Mundur Rotasi

The forward/reverse switch, located above the trigger, controls the direction of rotation. Push it to the left for forward (clockwise) rotation and to the right for reverse (counter-clockwise) rotation. Set it to the center position to lock the trigger and prevent accidental starting.

6.4. Ngagunakeun Lampu Gawé LED

The integrated LED light automatically illuminates the work area when the trigger is pressed, providing improved visibility in dimly lit conditions.

Figure 8: LED Work Light in Operation

Figure 9: Drill in Use

7. Pangropéa

7.1. beberesih

• Salawasna cabut pak batré saméméh beberesih.
• Tetep liang ventilasi bersih pikeun nyegah overheating.
• Ngusap perumahan alat ku lemes, damp lawon. Ulah make agén beberesih kasar atawa pangleyur.
• Bersihkeun rahang chuck sacara rutin pikeun mastikeun mata borna tiasa dicekel kalayan leres.

7.2. Kaperawatan batré

• Simpen batré di tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Do not store fully discharged batteries for extended periods. Recharge them periodically.
• Avoid exposing batteries to water or moisture.

Figure 10: Battery Performance Chart (Max. 6x45mm screws in soft wood per charge)

8. Cara ngungkulan

If you encounter issues with your Einhell TE-CD 18/44 Li-i, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Einhell customer support.

9. Spésifikasi

10. Garansi jeung Rojongan

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, or visit the official Einhell websitus kanggo inpormasi garansi lengkep.

For technical support, spare parts, or service inquiries, please contact Einhell customer service or visit the official Einhell store online:

Einhell Official Store: https://www.amazon.it/stores/EinhellItalia/page/1AEA0A4B-E15F-4792-8467-DE7EDB8D45C2