KATOOL AM120SD 12000lbs Two-Post Car Lift Instruction Manual

1. Bubuka jeung Leuwihview

This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your KATOOL AM120SD 12000lbs Two-Post Car Lift. Designed for professional automotive environments, this heavy-duty lift features a 4.0HP motor and a single-point locking system for enhanced safety and productivity. Please read this manual thoroughly before installation or operation to ensure proper usage and to prevent injury or damage.

2. Émbaran Kasalametan

Always prioritize safety when operating heavy machinery. Failure to follow safety instructions can result in serious injury or death. Ensure all personnel are trained and aware of potential hazards.

• Baca Manual: Paham sadaya prosedur operasi sareng peringatan kaamanan sateuacan dianggo.
• Personil anu mumpuni: Only trained and authorized individuals should operate this equipment.
• Pamasangan anu leres: Ensure the lift is installed on a level, solid concrete foundation capable of supporting the lift's weight and maximum load.
• Kapasitas beban: Never exceed the maximum rated lifting capacity of 12,000 lbs.
• Penempatan kendaraan: Center the vehicle properly on the lift arms and ensure all four lift pads are securely positioned under the vehicle's designated lifting points.
• Mékanisme ngonci: Always engage the safety locking mechanisms before working under the vehicle.
• Hapus Area: Keep the area around the lift clear of obstructions and unauthorized personnel during operation.
• Inspeksi rutin: Perform daily and weekly checks as outlined in the Maintenance section.

3. Fitur Produk

• Superior 12,000-lb Heavy-Duty Lifting Capacity: Built for demanding professional environments, this 2-post lift offers an exceptional 12,000-lb lifting capacity, making it a robust solution for auto repair shops, fleet maintenance centers, and dealerships.
• High-Efficiency 4.0HP Electric Motor System: Equipped with a powerful 4.0HP motor, this lift provides faster rise times, smoother operation, and consistent performance under heavy loads, ensuring quick and efficient lifting.
• Advanced Single-Point Locking System: The innovative Single Point Lock mechanism enhances safety by securely locking the lift at various height positions, providing peace of mind during extended operations.
• Maximum Working Height of 70.87 Inches: With an industry-leading maximum lifting height of 70.87 inches, this model offers outstanding overhead clearance for technicians to perform repairs, maintenance, and inspections with ease.
• Ultra-Low 4.25-Inch Minimum Height: Featuring an ultra-low minimum lifting height of just 4.25 inches, this lift easily accommodates vehicles with extremely low ground clearance, including sports cars and lowered sedans, without requiring additional adapters or ramps.

4. Spésifikasi

5. Setup jeung Instalasi

Proper installation is crucial for the safety and functionality of your KATOOL AM120SD lift. It is highly recommended that installation be performed by qualified professionals. Refer to the detailed installation video below for visual guidance.

Léngkah-léngkah Instalasiview:

1. Ngabongkar sareng Inspeksi: Carefully unbox all components. Check for any damage or missing parts.
2. Persiapan Situs: Ensure the installation site has a level concrete floor of sufficient thickness and strength to support the lift and its maximum load.
3. Column Placement: Position the two main columns according to the provided dimensions, ensuring proper spacing and alignment.
4. Jangkar: Securely anchor the columns to the concrete floor using the provided expansion bolts.
5. Setelan Sistem Hidrolik: Connect the hydraulic hoses and power unit. Fill the reservoir with the recommended hydraulic oil.
6. Routing kabel: Route the equalization cables and safety tripwires through the columns and pulleys as instructed.
7. Pamasangan Arm: Install the lifting arms, ensuring the correct two-stage and three-stage arms are placed at the front and rear respectively.
8. Sambungan listrik: Connect the 220V power supply to the motor, ensuring proper grounding.
9. Uji Coba Awal: Perform a test run without a vehicle to check for smooth operation, proper synchronization, and engagement of safety locks.

6. Parentah Operasi

Follow these steps for safe and effective operation of your KATOOL AM120SD Two-Post Car Lift.

Lifting a Vehicle:

1. Posisi Kandaraan: Arahkeun kendaraan kana lift, pastikeun kendaraan aya di tengah-tengah antara kolom-kolom.
2. Saluyukeun leungeun: Swing the lift arms into position under the vehicle's designated lifting points. Ensure the two-stage arms are at the rear and three-stage arms are at the front.
3. Adjust Lift Pads: Adjust the height of the lift pads to make firm contact with the vehicle's frame. Use height adjustment pads as needed for vehicles with varying chassis heights.
4. Angkat Awal: Press the 'UP' button on the power unit to slowly raise the vehicle a few inches off the ground.
5. Pariksa stabilitas: Carefully check that the vehicle is stable and securely supported on all four pads.
6. Full Lift: Continue pressing the 'UP' button to raise the vehicle to the desired working height.
7. Pasangkeun konci kaamanan: Once at the desired height, lower the lift slightly until the safety locks engage with an audible 'click'. This transfers the load from the hydraulic system to the mechanical locks.

Lowering a Vehicle:

1. Angkat sakedik: Press the 'UP' button briefly to lift the vehicle off the safety locks.
2. Disengage Locks: Pull the single-point lock release handle to disengage the safety locks.
3. Kandaraan handap: Press the 'DOWN' lever on the power unit to slowly lower the vehicle. Ensure the area below is clear.
4. Retract Arms: Once the vehicle is fully on the ground, swing the lift arms clear before driving the vehicle off the lift.

7. Pitunjuk Pangropéa sareng Perawatan

Regular maintenance is essential to ensure the longevity and safe operation of your KATOOL AM120SD lift.

Pamakéan sapopoé:

• Safety Device Check: Check if the safety device can lock into place and if the linkage is functioning properly. Repair or replace any potential hazards promptly.

Inspeksi Mingguan:

• Steel Wire Inspection: Inspect the steel wire for looseness or broken strands.
• Sliding Blocks: Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.

Pamariksaan Dua Mingguan:

• Hydraulic Hose Connections: Pariksa sadaya sambungan selang hidrolik pikeun ayana bocor atanapi pecah, teras perbaiki atanapi gentos upami diperyogikeun.

Pangropéa Bulanan:

• Pariksa Fastener: Pariksa naha sadaya sekrup sareng mur parantos kenceng kalayan leres. Saatos uji coba, kencengkeun deui sadaya sekrup sareng mur.

8. Cara ngungkulan

This section provides solutions to common issues you might encounter with your KATOOL AM120SD lift.

9. Naon dina Box

The KATOOL AM120SD 12000lbs Two-Post Car Lift package includes the following components:

• Two-Post Car Lift (Main Assembly)
• Power Unit (4.0HP, 220V)
• Selang hidrolik
• Lifting Arms (Two-stage and Three-stage)
• Lift Pads and Height Adapters
• Equalization Cables and Pulleys
• Safety Locking Mechanisms and Release Handle
• Mounting Hardware (Expansion Bolts, Nuts, Washers)
• Instruksi Manual

10. Garansi jeung Rojongan

KATOOL is committed to providing high-quality products and customer satisfaction. For any questions, technical assistance, or warranty claims, please contact KATOOL Customer Support.

• Rojongan Palanggan: For assistance, please refer to the contact information provided with your purchase or visit the official KATOOL websitus.
• Rencana panyalindungan: Rencana panyalindungan anu langkung lami tiasa sayogi kanggo dipésér pikeun nutupan investasi anjeun saluareun garansi standar.
• Wangsul: This product is eligible for 30-day easy returns. Please refer to the seller's return policy for details.