Manual Pangguna Sistem Pompa Panas Inverter Sentral ACiQ 2.5 Ton 17 SEER2

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of your ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System. This system is designed to provide efficient heating and cooling for residential and light commercial applications. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.

2. Émbaran Kasalametan

Always prioritize safety. Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Consult a qualified installer, service agency, or the gas supplier for information or assistance. The information contained in this manual is intended for use by qualified service personnel only.

• Kasalametan listrik: Ensure the power supply is disconnected before performing any service or maintenance. All electrical wiring must comply with local and national electrical codes.
• Penanganan Refrigerant: This system uses R-454B refrigerant. Only certified technicians should handle refrigerants.
• Pamasangan: Pamasangan kedah dilakukeun ku ahli HVAC anu gaduh lisénsi.
• Alat Pelindung Pribadi: Always wear appropriate personal protective equipment (PPE) such as gloves and safety glasses during installation and maintenance.

3. Fitur konci

• Téknologi Inverter: Provides precise temperature control, reduced energy consumption, and quieter operation.
• Efisiensi Tinggi: 18.8 SEER2 and 9.7 HSPF2 ratings for energy savings.
• Lega Rentang Operasi: Reliable performance from -13°F to 122°F.
• Operasi sepi: Indoor noise levels as low as 44 dBA, outdoor unit at 60 dBA.
• Komponén awét: Rotary compressor, aluminum coil, and fiberglass-free insulation.
• Refrigerant Eco-Friendly: Utilizes R-454B refrigerant.
• Instalasi fléksibel: Supports horizontal and vertical air handler installation.
• Kadali pinter: Compatible with wired controllers, WiFi, and third-party thermostats.
• Integrated Back-up Heat: Includes a 10kW back-up heat kit for supplemental heating.

4. komponén Leuwihview

The ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System includes the following main components:

• Outdoor Condensing Unit (Heat Pump)
• Unit Pangolah Udara Jero Ruangan
• 10kW Back-up Heat Kit
• 30' Line Set
• Gauge Electrical Whip
• 60A Non-Fused Disconnect Switch
• Termostat WiFi
• Pelindung Operasi
• Adaptor Ngecas CPS
• Tembok leungeun baju

Gambar 1: Leuwihview of the ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System, showing the outdoor unit, indoor air handler, 10kW back-up heat kit, thermostat, line set, and various installation accessories.

5. Setup jeung Instalasi

Installation of this ACiQ heat pump system requires specialized knowledge and tools. It must be performed by a qualified and licensed HVAC technician to ensure safety, compliance with local codes, and optimal performance. Refer to the detailed installation manual provided with the product for specific instructions.

5.1 Cék Pra-Pamasangan

• Verify that the electrical supply matches the unit's requirements (Indoor: 115/208/230V, 60Hz, 1Ph; Outdoor: 208/230V, 60Hz, 1Ph).
• Pastikeun rohangan anu cekap pikeun unit indoor sareng outdoor, supados aliran hawa sareng aksés pangropéa tiasa lancar.
• Confirm that the maximum piping length (164 ft / 50m) and height difference (82 ft / 25m) are not exceeded.

5.2 Air Handler Installation

The indoor air handler unit is designed for flexible installation, supporting upflow, downflow, and horizontal configurations to suit various space requirements.

Gambar 2: Diagram illustrating the multi-positional capabilities of the indoor air handler unit, showing options for upflow, downflow, and horizontal installation.

5.3 Penempatan Unit Luar Ruangan

Consider the outdoor unit's dimensions and required clearances for optimal performance and maintenance. The unit features a compact design compared to traditional systems.

Gambar 3: Graphic comparing the smaller footprint of the ACiQ outdoor unit (20 inches clearance) versus a traditional unit (36 inches clearance), highlighting its high efficiency and self-cleaning features.

6. Parentah Operasi

Your ACiQ heat pump system offers advanced control options for comfortable and efficient operation.

6.1 Modeu Operasi Dasar

• Modeu tiis: Provides cooling with a capacity of 31,000 BTU/hr. Operates efficiently from -13°F to 122°F ambient temperatures.
• Mode pemanasan: Provides heating with a capacity of 30,000 BTU/hr at 47°F. Reliable warmth down to -13°F. The 10kW back-up heat kit provides supplemental heat when needed.
• Modeu kipas: Sirkulasi hawa tanpa pemanasan atawa cooling.
• Modeu Otomatis: Otomatis pindah antara pemanasan sareng pendinginan pikeun ngajaga suhu anu disetel.

Gambar 4: The ACiQ outdoor unit installed on a patio, demonstrating its ability to operate effectively in extreme heat conditions, up to 122°F.

Gambar 5: The ACiQ outdoor unit partially covered in snow, illustrating its capability to operate in extreme cold temperatures, down to -13°F.

6.2 Kontrol Pinter

The system can be controlled via the included wired thermostat, WiFi-enabled app, or compatible third-party thermostats. The WiFi app allows for remote control and monitoring of your system.

Gambar 6: Image showing the ACiQ Smart Home mobile application interface on a smartphone alongside a wired thermostat, demonstrating the system's smart control capabilities for climate management.

7. Pangropéa

Regular maintenance ensures the longevity and efficiency of your ACiQ heat pump system. Always disconnect power before performing any maintenance.

• Ngaganti Saringan Udara: Check and replace air filters in the indoor air handler every 1-3 months, or more frequently if needed. Dirty filters restrict airflow and reduce efficiency.
• Ngabersihan Unit Luar: Keep the outdoor unit free from debris, leaves, and dirt. Periodically clean the coils with a soft brush or water hose (ensure power is off).
• Sistim drainase: Ensure the condensate drain line is clear and free of blockages to prevent water overflow.
• Pamariksaan profésional: Schedule annual inspections and maintenance by a qualified HVAC technician.

8. Cara ngungkulan

This section provides solutions for common issues. For complex problems, contact a qualified HVAC technician.

• Henteu aya kakuatan: Check circuit breakers and ensure the disconnect switch is in the ON position.
• Insufficient Heating/Cooling: Verify thermostat settings, check air filters for blockage, and ensure outdoor unit is not obstructed.
• Sora anu teu biasa: Minor operational noises are normal. Loud or unusual noises may indicate a problem requiring professional inspection.
• bocor cai: Check condensate drain line for blockages.

9. Spésifikasi

Gambar 7: Image displaying the dimensions of both the indoor air handler unit (49.02" H x 21.02" W x 21.02" D) and the outdoor condensing unit (35.04" H x 37.24" W x 16.14" D).

Gambar 8: Chart detailing the cooling capacity of the ACiQ system at various outdoor temperatures: 86°F (118% capacity), 95°F (113% capacity), 110°F (99% capacity), and 122°F (48% capacity).

Gambar 9: Chart detailing the heating capacity of the ACiQ system at various outdoor temperatures: -22°F (N/A), -13°F (41% capacity), 0°F (57% capacity), 17°F (70% capacity), and 32°F (73% capacity).

10. Garansi jeung Rojongan

ACiQ offers a comprehensive warranty for this heat pump system:

• Garansi Bagian: 7 taun
• Garansi Compressor: 12 taun

These warranty terms are valid when the system is installed by a certified technician and registered online with the manufacturer. For technical support, service inquiries, or warranty claims, please refer to the contact information provided in your product packaging or visit the official ACiQ websitus.