1. Bubuka
Hatur nuhun pikeun meuliasing the Soundavo PSB-1000DSP (Version 2) Subwoofer Amppangagung. Ieu amplifier is designed to deliver powerful and precise bass for your home theater and audio systems. Featuring a Class D circuit design, built-in DSP settings, and versatile connectivity options, it provides an exceptional audio experience. This manual will guide you through the setup, operation, and maintenance of your new amppangagung.
2. Émbaran Kasalametan
Please read all safety instructions carefully before operating the amppangéling-ngéling. Simpen manual ieu kanggo rujukan ka hareup.
- Sumber Daya: Nyambungkeun ampngan ukur kana voltase catu daya anu ditangtukeuntage as indicated on the unit. Ensure the AC voltage selector is set correctly for your region (110-120V or 220-240V).
- Ventilasi: Ulah ngahalangan liang ventilasi naon waé. Pastikeun aliran hawa anu cekap di sakitar unit pikeun nyegah panas teuing.
- Cai sareng Uap: Ulah ngalaan amplifier to rain, moisture, or excessive humidity. Do not place objects filled with liquids, such as vases, on the unit.
- Panas: Tetep dina amplifier away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Palayanan: Entong nyobian ngalayanan produk ieu nyalira. Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni.
- beberesih: Cabut colokan unit tina stop kontak sateuacan dibersihkeun. Anggo lawon garing pikeun ngabersihkeun. Entong nganggo pembersih cair atanapi pembersih aerosol.
3. Produk Langkungview
The Soundavo PSB-1000DSP (Version 2) is a high-performance Class D subwoofer amplifier designed for robust bass delivery in home theater environments. It features a 2U rack-mountable design and provides 1000W RMS at 4 Ohms. The integrated Digital Signal Processing (DSP) allows for precise control over audio parameters, ensuring optimal performance with various subwoofer sizes and room acoustics.
Gambar 3.1: Hareupeun view of the PSB-1000DSP amplifier with its remote control, showcasing the LCD display and control knob.
Fitur konci:
- Wat luhurtage Power Output: Delivers 1 x 1000W RMS @ 4 Ohms (or 2 x 500W RMS @ 8 Ohms minimum load).
- Konektipitas serbaguna: Stereo/mono line level audio input (RCA), LFE input, stereo speaker level input/outputs.
- RS-232 Control Ports: For integration with control systems, allowing master volume and muting control.
- Pangolahan Sinyal Digital (DSP): Built-in DSP for adjusting Crossover Frequency, Crossover Slopes, Phase, Low Cut, and storing up to 3 presets.
- Flexible Power Management: Audio On/Off Detects, RS-232, and 12VDC Trigger for automatic power control.
- Antarmuka anu ramah-pamaké: LCD display on the front panel for easy navigation and settings adjustment.
- Fitur panyalindungan: Short circuit and thermal protection built-in.
4. Eusi Paket
Upon unpacking your Soundavo PSB-1000DSP (Version 2) amplifier, please ensure all items are present and in good condition:
- Soundavo PSB-1000DSP (Version 2) Subwoofer Amppangagung
- IR Jauh Control
- Kabel Daya AC
- Manual pangguna (dokumén ieu)
If any items are missing or damaged, please contact your retailer or Soundavo customer support immediately.
5. Setup jeung Sambungan
Proper setup is crucial for optimal performance. Follow these steps to connect your amppangagung.
5.1 Panel Rear Leuwihview
Figure 5.1: Rear panel of the PSB-1000DSP amplifier, detailing the various input, output, and control ports.
5.2 AC Voltage Pamilih
Before connecting the power cord, ensure the AC VOLTAGE SELECTOR switch on the rear panel is set to the correct voltage for your region (110-120V or 220-240V). Incorrect voltagPilihan e tiasa ngaruksak unit.
Figure 5.2: Detail of the AC Voltage Selector switch on the rear panel.
5.3 Panyambung Audio
The PSB-1000DSP offers multiple ways to connect to your audio system:
- Input Tingkat Jalur (RCA): Connect your receiver's LFE (Subwoofer Out) or stereo pre-out to the LINE IN (LFE/MONO or L/R) RCA jacks. If using a single LFE output, connect to the LFE/MONO input.
- Input Tingkat Speaker: For receivers without line-level outputs, connect the speaker outputs of your receiver to the SPEAKER LEVEL IN terminals. Use the SPEAKER LEVEL OUT terminals to pass the signal through to your main speakers if needed.
- Kaluaran Subwoofer: Connect your passive subwoofer(s) to the SUB OUTPUT binding posts. The amplifier supports 1 x 1000W RMS @ 4 Ohms or 2 x 500W RMS @ 8 Ohms. Ensure your subwoofer's impedance matches the ampkamampuhan kaluaran lifier urang.
Figure 5.3: Detail of the subwoofer output terminals, indicating connection options for 4 Ohm and 8 Ohm loads.
5.4 Sambungan kontrol
- 12V Pemicu: Connect a 12V trigger cable from your receiver or control system to the 12V TRIGGER IN jack. This allows the amplifier to power on/off automatically with your main system.
- RS-232: Use the RS-232 port for advanced control integration with home automation systems. Refer to the RS-232 command set documentation for detailed protocols.
- SERVICE USB: This port is for firmware updates and service purposes only. Do not connect consumer devices to this port.
6. Operasi anu Amppangagung
The PSB-1000DSP (Version 2) can be operated via its front panel controls or the included IR remote control.
6.1 Kadali Panel hareup
The front panel features an LCD display and a multi-function knob (Value-Push to Enter).
Figure 6.1: Close-up of the LCD display, showing volume and other DSP settings.
- Layar LCD: Shows current settings, menu options, and volume level.
- Knob multi-fungsi: Rotate to navigate menu options or adjust values. Push to select an option or confirm a setting.
6.2 Fungsi Remote Control
The IR remote control provides convenient access to all ampfungsi liifier.
Figure 6.2: The included IR remote control for the PSB-1000DSP amppangagung.
- Daya ON/OFF: Ngahurungkeun amplifier atawa mareuman.
- Bisu: Ngajempékeun atanapi nganonaktipkeun kaluaran audio.
- UP/VOL+, DOWN/VOL-: Saluyukeun tingkat polumeu.
- LEFT, RIGHT: Navigates menu options horizontally.
- MENU/Asupkeun: Enters the menu or confirms a selection.
- KALUAR: Exits the current menu or setting.
- STORE 1/2/3: Saves current DSP settings to one of three memory presets.
- RECALL 1/2/3: Recalls one of the three saved DSP presets.
- datar: Resets DSP settings to a flat frequency response.
- PEUTING ON / OFF: Activates or deactivates Night Mode, which typically reduces dynamic range for late-night listening.
6.3 DSP Settings
The built-in DSP allows for fine-tuning of your subwoofer's performance. Access the DSP menu via the front panel knob or remote control.
- Master Volume Level: Nyaluyukeun volume kaluaran sakabéhna subwoofer.
- Frékuénsi Crossover: Sets the upper frequency limit for the subwoofer. Adjustable to blend seamlessly with your main speakers.
- Lereng Crossover: Select from 4 different slopes (e.g., 12dB, 24dB, 36dB, 48dB per octave) to control the steepness of the crossover filter.
- Fase: Adjusts the phase (0° or 180°) to ensure the subwoofer's output is in phase with your main speakers, preventing cancellation at the crossover point.
- Potongan rendah: Sets a high-pass filter to remove extremely low frequencies that may not be reproducible by your subwoofer or could cause distortion.
- Prasetél: Store up to 3 customized DSP settings optimized for different content (e.g., music, movies, late-night listening) or subwoofer sizes (e.g., 8", 10", 12" subs).
6.4 Power Management Modes
The three-way switch on the rear panel allows you to select the amplifier's power-on mode:
- 12V Trigger Mode: The amplifier powers on/off when a 12V trigger signal is detected.
- Auto On/Off (Music Signal Detect): The amplifier automatically turns on when an audio signal is detected and enters standby after a period of no signal. The auto-off delay can be set from 5-30 minutes in 5-minute increments via the DSP menu.
- Modeu Salawasna Aktif: The amplifier remains powered on continuously.
7. Pangropéa
To ensure the longevity and optimal performance of your Soundavo PSB-1000DSP ampLifier, turutan tungtunan pangropéa ieu:
- beberesih: Regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as they may damage the finish.
- Ventilasi: Ensure that the ventilation grilles are free from dust and obstructions. Periodically use a soft brush or vacuum cleaner to remove any accumulated dust.
- Sambungan: Pariksa sadaya sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
- Panyimpenan: Lamun nyimpen éta amplifier for an extended period, disconnect it from the power supply and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Cara ngungkulan
Upami anjeun mendakan masalah sareng anjeun ampLifier, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Henteu aya kakuatan / Unit henteu hurung. | Power cord not securely connected; AC voltage selector incorrect; Power outlet faulty. | Ensure power cord is fully inserted. Verify AC voltage selector matches your region's voltage. Test power outlet with another device. |
| Taya sora tina subwoofer. | Input cables loose or incorrect; Subwoofer cables loose or incorrect; Amplifier muted; Incorrect input selected; DSP settings (e.g., Low Cut too high). | Check all RCA/speaker level input and subwoofer output connections. Ensure amplifier is not muted. Verify correct input source is selected on your receiver/preamp. Review Setélan DSP. |
| Amplifier pareum kaduga. | Overheating; Auto On/Off mode engaged with no signal; Short circuit in speaker wiring. | Ensure adequate ventilation. Check power management mode (12V Trigger, Auto On/Off, Always On). Inspect speaker wiring for shorts. Allow unit to cool if overheated. |
| Kualitas sora anu distorsi atanapi goréng. | Incorrect DSP settings; Overdriving the amplifier/subwoofer; Loose connections. | Adjust DSP settings (Crossover, Phase, Volume). Reduce input level from source. Check all audio connections. |
| Kadali jauh teu jalan. | Batteries dead or inserted incorrectly; Obstruction between remote and ampliifier; Sénsor jauh diblokir. | Replace batteries. Ensure clear line of sight to the ampsénsor IR lifier. |
| Difficult menu navigation. | User unfamiliarity with sequential menu access. | Familiarize yourself with the menu structure. Use the remote control for easier navigation. Note that some settings require sequential scrolling. |
9. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | PSB-1000DSP(Version 2) |
| Daya Kaluaran | 1000 Watts RMS @ 4 Ohms (1 x 1000W) or 500 Watts RMS @ 8 Ohms (2 x 500W) |
| Amplifier Kelas | Kelas D |
| Téhnologi konektipitas | RCA |
| Tipe Controller | Foot Control (referring to the knob, not a literal foot pedal) |
| Fitur husus | Subwoofer AmpLifier kalawan DSP |
| Alat nu cocog | Amplifier, Receivers, Pre-amps |
| Mode Kaluaran Audio | Sakuriling |
| Konfigurasi Saluran Sakuliling Sora | 5.1 (typical system integration) |
| Warna | Hideung |
| Item Beurat | 17.69 pon |
| Ukuran Paket | 22.36 x 17.63 x 9.29 inci |
| Produsén | Soundavo |
10. Garansi jeung Rojongan
Soundavo products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Soundavo websitus pikeun istilah jeung kaayaan jaminan lengkep.
For technical support, troubleshooting assistance, or warranty claims, please contact Soundavo customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (PSB-1000DSP Version 2) and purchase details ready.
Kanggo inpo nu leuwih lengkep, buka di Soundavo Store on Amazon.
