1. Produk Langkungview
The Pretul SOIN-313MBP is a lightweight, compact, and highly efficient bi-voltage mini inverter welder designed for Shielded Metal Arc Welding (SMAW) processes. It offers a higher duty cycle and lower power consumption compared to conventional welders, making it ideal for various welding tasks.
This welder features a current adjustment knob and a digital display for precise control. It is compatible with both 127 V and 220 V power supplies, providing flexibility for different work environments.
Figure 1: Pretul SOIN-313MBP Mini Inverter Welder with electrode holder cable, ground clamp cable, protective mask, wire brush, and strap.
2. Komponén Kaasup
The Pretul SOIN-313MBP Mini Inverter Welder package includes the following components:
- 1x Protective Mask
- 1 x Sikat Kawat
- 1 x Tali
- 1x Cl taneuhamp Cable (1.9 m / 6.2 ft, #5 AWG / 16 mm²)
- 1x Electrode Holder Cable (1.8 m / 5.9 ft, #5 AWG / 16 mm²)
- 1x Power Supply Cable with Plug (2 m / 6.5 ft)
Gambar 2: Detil view of the accessories included with the welder.
3. Setup jeung Sambungan
Before operating the welder, ensure all connections are secure and the work area is safe and well-ventilated. The welder supports bi-voltage input, automatically adapting to 127 V or 220 V power supplies.
- Sambungan Daya: Connect the power supply cable to a suitable 127 V or 220 V AC outlet. The welder automatically detects the voltage.
- Taneuh Clamp Sambungan: Ngagantelkeun taneuh clamp cable to the negative (-) terminal of the welder using the quick-change 3/8" borne. Secure the ground clamp to the workpiece or welding table.
- Sambungan Panyekel Éléktroda: Connect the electrode holder cable to the positive (+) terminal of the welder using the quick-change 3/8" borne. Insert the appropriate electrode into the holder.
- Protective Mask: Always wear the protective mask and other personal protective equipment (PPE) before turning on the welder.
Figure 3: Front panel with digital display and current adjustment knob, and rear panel showing the cooling system and power switch.
4. Parentah Operasi
The Pretul SOIN-313MBP is designed for SMAW (Shielded Metal Arc Welding) processes. Follow these steps for operation:
- Daya Hurung: Flip the power switch located on the rear panel to the 'ON' position. The digital display will illuminate.
- Penyesuaian ayeuna: Use the yellow knob on the front panel to adjust the welding current. The digital display will show the selected amperage.
- 1 Phase (127 V): Current range 20 A - 100 A
- 2 Phases (220 V): Current range 20 A - 130 A
- Pilihan éléktroda: This welder is suitable for coated electrodes such as 6013, 6011 (up to 5/32" diameter), and 7018 (up to 3/32" diameter). Select the appropriate electrode for your welding task.
- Prosés las: Begin welding, maintaining proper arc length and travel speed. Always ensure good ventilation and wear appropriate safety gear.
- Siklus tugas: The welder has a duty cycle of 6 minutes of work followed by 4 minutes of rest. Adhering to the duty cycle prevents overheating and prolongs the life of the machine.
Figure 4: Key features of the welder, including its suitability for SMAW, portability, and duty cycle information.
5. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your Pretul SOIN-313MBP welder.
- beberesih: Periodically clean the exterior of the welder with a dry cloth. Ensure the cooling vents (located on the rear panel) are free from dust and debris to maintain proper airflow.
- Pamariksaan kabel: Pariksa sacara rutin sadaya kabel (listrik, wadah éléktroda, ground clamp) for any signs of damage, fraying, or exposed wires. Replace damaged cables immediately.
- Pariksa Terminal: Ensure the quick-change terminals are clean and free of corrosion. A clean connection ensures efficient current transfer.
- Panyimpenan: When not in use, store the welder in a dry, clean environment, away from direct sunlight and extreme temperatures.
6. Cara ngungkulan
This section provides solutions to common issues you might encounter with your welder. For problems not listed here, contact customer support.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Mesin las teu bisa dihurungkeun. | No power supply; power switch off; faulty cable. | Check power outlet and cable connection. Ensure power switch is ON. |
| Teu aya lengkungan atanapi lengkungan anu lemah. | Poor ground connection; incorrect current setting; damp éléktroda. | Pastikeun taneuh clamp is securely attached. Adjust current. Use dry electrodes. |
| Welder overheats and shuts off. | Exceeded duty cycle; blocked cooling vents. | Allow welder to cool down. Clear any obstructions from cooling vents. Adhere to duty cycle. |
7. Spésifikasi
Detailed technical specifications for the Pretul SOIN-313MBP Mini Inverter Welder:
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | SOIN-313MBP (29019) |
| Produsén | Truper |
| Warna | Konéng |
| Sumber Daya | Electric (AC Powered) |
| Masukan Voltage (1 fase) | 127 V AC / 32 A / 50-60 Hz |
| Masukan Voltage (2 Phases) | 220 V AC / 22 A / 50-60 Hz |
| Current Range (1 Phase) | 20 A - 100 A |
| Current Range (2 Phases) | 20 A - 130 A |
| Arus maksimum | 130 A DC |
| Kakuatan | 3.5 kVA (1 Phase • 2 Phases) |
| Buka Circuit Voltage | 75 V DC (1 Phase) • 62 V DC (2 Phases) |
| Terminal | 3/8" Quick-Change |
| Siklus tugas | 6 minutes work / 4 minutes rest |
| Ukuran (L x W x H) | 26 cm (Depth) x 11 cm (Base) x 17 cm (Height) |
| Beurat | 4.32 kg |
Figure 5: Dimensions and key electrical characteristics of the welder.
8. Garansi jeung Rojongan
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Pretul website. For technical support, service, or spare parts, please contact your authorized dealer or the manufacturer's customer service department.
Punten tahan bukti pameseran anjeun pikeun klaim garansi.
