Best Choice Products 36-inch Galvanized Blade 2-Wheel Snow Pusher Hand Plow Instruction Manual

Bubuka

This manual provides essential information for the safe assembly, operation, and maintenance of your Best Choice Products 36-inch Galvanized Blade 2-Wheel Snow Pusher Hand Plow. Please read all instructions carefully before use to ensure proper function and longevity of the product.

Émbaran Kasalametan penting

PERHATOSAN: Upami teu nuturkeun pitunjuk kaamanan ieu tiasa nyababkeun tatu atanapi karusakan harta benda.

• For safe use, always wear appropriate protective gear, including eye protection.
• Be aware of your surroundings and avoid contact with underground utilities.
• Use the snow plow in well-lit conditions or ensure visibility with the included reflective tape during low-light conditions.
• Always follow the assembly instructions and use the tool as intended.
• Pikeun pamakéan padumukan wungkul.
• Jauhkeun barudak jeung piaraan ti wewengkon gawé.
• Do not attempt to clear snow deeper than recommended (typically 3-8 inches for heavy snow) to prevent strain and damage to the unit.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian assembly. Lamun bagian mana wae nu leungit atawa ruksak, ulah lumangsungna assembly sarta kontak rojongan customer.

• Galvanized Steel Blade (36-inch)
• Main Handle Assembly (Adjustable)
• Wheel Assembly (2 wheels)
• Blade Angle Adjustment Mechanism
• Pita Reflektif
• Hardware Pack (bolts, nuts, pins, washers)
• Instruksi Manual

Parentah Majelis

Follow these steps to assemble your snow pusher. It is recommended to have a wrench and hex key available for assembly.

Step 1: Attach Wheels to Frame

Secure the two wheels to the main frame using the provided axle and hardware. Ensure wheels are firmly attached and rotate freely.

Step 2: Assemble the Handle

Connect the handle sections. The handle is designed to be height-adjustable. Insert the pins to secure the desired height. Apply the reflective tape to the handle for enhanced visibility.

Step 3: Attach Blade to Frame

Attach the galvanized steel blade to the main frame using the provided bolts and nuts. Ensure the blade is securely fastened but allows for angle adjustment.

Step 4: Connect Blade Angle Mechanism

Connect the blade angle adjustment mechanism to the blade and frame. This mechanism allows you to change the blade's direction for efficient snow displacement.

Assembly Video Reference

For a visual guide on assembly and features, please refer to the following video:

Disetél

Nyaluyukeun Jangkungna Nanganan

The handle height can be adjusted to suit your stature for maximum control and comfort. Locate the adjustment pins on the handle shafts. Pull out the pins, slide the upper handle section to the desired height, and re-insert the pins to lock it in place. Ensure both sides are adjusted evenly.

Nyaluyukeun Sudut agul

The blade angle can be adjusted to direct snow to the left or right. Locate the blade angle adjustment mechanism near the base of the blade. Slide and secure the guide rail to lock the blade into the ideal position. The blade can be adjusted up to 30 degrees in either direction.

Parentah Operasi

To effectively clear snow with your 2-wheel snow pusher, follow these guidelines:

• Pushing Technique: Push the snow pusher forward in a steady motion. The wheels will assist in gliding the blade across the surface.
• Snow Depth: This snow pusher is most effective for clearing light to moderate snowfall (up to 8 inches). For very deep or heavy, wet snow, it may be necessary to clear in multiple passes or smaller sections.
• Sudut sabeulah: Adjust the blade angle to push snow to the side of your path, preventing it from accumulating directly in front of you.
• Tipe permukaan: Works best on solid surfaces like driveways, walkways, and sidewalks.
• Visibilitas: Always ensure good visibility, especially during early morning or low-light conditions, utilizing the reflective tape on the handle.

Pangropéa

• beberesih: After each use, clear any snow, ice, or debris from the blade and wheels. Wipe down metal parts to prevent rust.
• Panyimpenan: When not in use, store the snow pusher in a dry, covered area to protect it from the elements. The handle can be locked upright for compact storage in narrow spaces.
• Pamariksaan: Periodically check all bolts, nuts, and pins to ensure they are tight. Tighten as necessary. Inspect the blade for any signs of wear or damage.

Pamérésan masalah

• Kasusah Ngadorong:
  • Check if the snow depth is too high. Try clearing in smaller sections.
  • Ensure the blade angle is set correctly to direct snow efficiently.
  • Verify wheels are free of debris and rotating smoothly.
• Blade Not Clearing Evenly:
  • Inspect the blade for any damage or uneven wear.
  • Ensure all blade attachment bolts are securely tightened.
• Loose Handle/Components:
  • Check and tighten all bolts, nuts, and pins on the handle and frame.

spésifikasi

Garansi sareng Rojongan

For warranty information or customer support, please refer to the product packaging or contact Best Choice Products directly through their official websitus atanapi saluran layanan palanggan. Simpen resi pameseran anjeun kanggo klaim garansi.