be quiet! Pure Power 12 1000W Power Supply User Manual

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of your be quiet! Pure Power 12 1000W Power Supply. This power supply unit (PSU) is designed to deliver stable and efficient power to your computer system, featuring 80 Plus Gold efficiency, ATX 3.1 compliance, and support for PCIe 5.1 GPUs.

Please read this manual thoroughly before installing and operating the power supply to ensure safe and correct usage.

Image 1.1: The be quiet! Pure Power 12 1000W Power Supply, showcasing its sleek black design and fan grill.

2. Parentah Kasalametan

Always observe the following safety instructions to prevent injury or damage to the product and connected components:

• Ulah muka unit catu daya. Tinggi voltages are present inside, which can cause electric shock. The warranty will be void if the unit is opened.
• Ngan tanaga mumpuni kedah ngalakukeun perbaikan.
• Ensure the power supply is disconnected from the mains power before installation or maintenance.
• Do not operate the power supply in high humidity or wet conditions.
• Pastikeun ventilasi ditangtoskeun sabudeureun catu daya pikeun nyegah overheating.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• be quiet! Pure Power 12 1000W Power Supply Unit
• kabel kakuatan utama
• Modular cable set (including ATX 3.1 12V-2x6 connector)
• Pamasangan screws
• Ikatan kabel
• Buku pituduh

Image 3.1: The be quiet! Pure Power 12 1000W Power Supply shown with its accompanying cables, including the main power cable and various modular connectors.

4. Instalasi jeung Setup

Turutan léngkah-léngkah ieu pikeun masang catu daya anjeun:

1. Nyiapkeun sistem anjeun: Pastikeun komputer anjeun pareum sareng dicabut tina stop kontak témbok.
2. Remove old PSU (if applicable): Disconnect all cables from your old power supply and remove it from the PC case.
3. Mount the new PSU: Place the be quiet! Pure Power 12 1000W into the designated PSU bay in your PC case. Secure it with the provided mounting screws.
4. Connect essential cables:
   • Connect the 24-pin ATX motherboard power cable.
   • Connect the 8-pin (4+4) CPU power cable to your motherboard.
   • For modern graphics cards, connect the ATX 3.1 PCIe 5.1 12V-2x6 connector. This connector supports up to 600W for compatible GPUs.
   • Connect other necessary cables for your components (SATA for storage drives, PCIe for additional graphics cards or expansion cards).
5. Manajemén Kabel: Route cables neatly to improve airflow and aesthetics. Use the provided cable ties.
6. Cék ahir: Ganda-pariksa sadaya sambungan pikeun mastikeun aranjeunna aman.

Gambar 4.1: Deukeut view of the ATX 3.1 PCIe 5.1 12V-2x6 connector, designed for high-power graphics cards.

Gambar 4.2: Hiji example of the power supply unit installed within a computer case, demonstrating cable routing.

5. Operasi

After successful installation, connect the main power cable to the PSU and a wall outlet. Flip the power switch on the back of the PSU to the 'ON' position. You can then power on your computer system as usual.

The be quiet! Pure Power 12 features a silence-optimized 120mm fan, ensuring quiet operation even under load. The fan speed is automatically regulated based on the power supply's temperature to maintain optimal cooling and low noise levels.

Gambar 5.1: A view of the silence-optimized 120mm fan integrated into the power supply, designed for efficient and quiet cooling.

6. Pangropéa

To ensure the longevity and optimal performance of your power supply, periodic maintenance is recommended:

• beberesih: Regularly clean the exterior of the power supply and the fan grill using a soft, dry cloth. For dust accumulation inside the unit, use compressed air, ensuring the fan blades are held stationary to prevent damage.
• Ventilasi: Ensure that the air intake and exhaust vents of the power supply are not obstructed.
• Komponén internal: Do not attempt to clean or service internal components. Refer to Section 2 for safety warnings regarding opening the unit.

7. Cara ngungkulan

Upami anjeun ngalaman masalah sareng catu daya anjeun, pertimbangkeun léngkah-léngkah ngungkulan ieu:

• Henteu aya kakuatan:
  • Check if the main power cable is securely connected to both the PSU and the wall outlet.
  • Pastikeun saklar kakuatan dina tonggong PSU dina posisi 'ON'.
  • Pariksa yén stop kontak témbok fungsina ku cara nyolok kana alat anu sanés.
  • Confirm all internal power cables (24-pin ATX, CPU, GPU) are correctly seated.
• Instabilitas Sistem / Kacilakaan:
  • Pastikeun syarat kakuatan sistem anjeun henteu ngaleuwihan kapasitas 1000W PSU.
  • Pariksa sambungan kabel leupas.
  • Ngawas suhu sistem pikeun nyegah overheating komponén séjén.
• Noise anu teu biasa:
  • Ensure no cables are obstructing the PSU fan.
  • If the noise persists and is not related to fan operation, contact customer support.

If these steps do not resolve the issue, please contact be quiet! customer support for further assistance.

8. Spésifikasi

Key technical specifications for the be quiet! Pure Power 12 1000W Power Supply:

Image 8.1: The product label detailing electrical specifications and compliance information for the Pure Power 12 series.

9. Garansi jeung Rojongan

Your be quiet! Pure Power 12 1000W Power Supply is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official be quiet! websitus pikeun istilah jeung kaayaan jaminan lengkep.

For technical support, product inquiries, or warranty claims, please visit the official be quiet! support page or contact their customer service department. Contact information can typically be found on the be quiet! websitus atanapi dina bungkusan produk.