VEVOR Pressure Washer Pump QXB-3 User Manual

Bubuka

This manual provides essential instructions for the safe installation, operation, and maintenance of your VEVOR Pressure Washer Pump, Model QXB-3. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

The VEVOR QXB-3 is a replacement vertical shaft pressure washer pump designed for engines with a 7/8-inch shaft, delivering up to 3300 PSI and 3.0 GPM. It is compatible with various pressure washer brands including RYOBI, Honda, and Briggs and Stratton, provided they match the specified shaft size and engine orientation.

Émbaran Kasalametan

PERHATOSAN: Upami teu nuturkeun pitunjuk ieu tiasa nyababkeun tatu parah atanapi karusakan harta benda.

• Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when installing or operating the pressure washer pump.
• Ensure the pressure washer engine is turned off and cooled down before attempting any installation, maintenance, or repair.
• Pegatkeun sambungan kabel busi pikeun nyegah ngamimitian teu kahaja.
• Relieve all pressure in the system before disconnecting hoses or performing maintenance.
• Do not operate the pump without water supply. Dry running can cause severe damage.
• Verify compatibility of the pump with your pressure washer engine (shaft size, engine orientation, and horsepower) before installation.
• Jauhkeun barudak jeung piaraan ti wewengkon gawé.

Produk Leuwihview

Fitur konci

• High-Efficiency Cleaning Power: Delivers up to 3300 PSI and 3.0 GPM for various cleaning tasks. Recommended working pressure is 2600 PSI for extended lifespan.
• Kasaluyuan kuat: Designed for 7/8-inch vertical shaft rear-outlet engines, fitting most 196-230cc 6HP-8HP engines with a standard SAE bolt pattern.
• Desain Bebas Pangropéa: Features a maintenance-free crankcase, eliminating the need for oil changes.
• Konstruksi awét: Made from cast aluminum for corrosion resistance and durability, ensuring reliable performance for up to 150 hours of continuous operation.
• Pencegahan bocor: Equipped with a high-hardness plunger and metal sleeve design to reduce leak risk and resist deformation under high pressure.
• Saringan Terpadu: High-density filter protects the pressure washer pump.

Eusi pakét

The VEVOR Pressure Washer Pump kit includes the following items:

• 1 x Pressure Washer Pump (Model QXB-3)
• 5 x Spray Nozzles (various degrees)
• 1 x Nozzle beberesih Pin
• 1 x Siphon Tube with Filter
• 2 x Konci Poros
• 3 x M8 Washers Datar
• 3 sets of M8 Hex Bolts & Nuts

Image: VEVOR Pressure Washer Pump QXB-3 and its complete set of accessories.

Image: Key components and features of the VEVOR Pressure Washer Pump QXB-3.

Setup sareng Instalasi

Cék kasaluyuan

Before installation, ensure your pressure washer engine meets the following criteria:

• Engine Orientation: Vertical shaft engine. This pump is not compatible with horizontal engines.
• Diaméter aci: 7/8 inch (22.2mm) shaft.
• Daya Mesin: 6-8 HP (196-230cc).
• Water Inlet Direction: Rear water inlet. This pump is designed for rear-outlet engines.
• Pola Pemasangan: Standard SAE bolt pattern.

Image: Confirming the correct rear water inlet direction for pump compatibility.

Image: Standard SAE bolt pattern and shaft dimensions for proper fitment.

Léngkah-léngkah Instalasi

1. Persiapan: Ensure the pressure washer engine is off, cooled, and the spark plug wire is disconnected. Gather the pump head, fixing screws, and shaft keys.
2. Adjust Spindle: Adjust the power spindle on the engine so that the keyway faces upwards.
3. Insert Flat Key: Carefully insert the flat key into the keyway on the engine's power spindle.
4. Align and Mount Pump: Align the crankshaft of the pump head with the keyway facing upwards, matching the key and keyway positions. Gently push the pump head onto the engine shaft until it is fully seated.
5. Pompa Aman: Insert the three M8 hex bolts through the pump's mounting arms and into the engine's bolt holes. Tighten the three screws in sequence, ensuring even pressure. Do not overtighten.
6. Sambungkeun hoses: Connect your garden hose to the 3/4" NH inlet and your pressure washer hose to the M22 x 1.5-14mm outlet.

Parentah Operasi

Pamilihan Nozzle

The included 5 nozzles provide versatility for various cleaning tasks:

• Beureum (0°): Concentrated, high-pressure stream for tough stains and hard-to-reach areas. Use with extreme caution.
• Konéng (15°): Narrow fan spray for intense cleaning of small areas, stripping paint, or removing heavy grime.
• Héjo (25°): Medium fan spray for general cleaning of most surfaces, such as decks, patios, and driveways.
• Bodas (40°): Wide fan spray for gentle cleaning of delicate surfaces, vehicles, or rinsing.
• Hideung (Nozzle Sabun): Low-pressure wide spray for applying detergents and cleaning solutions.

Image: Multiple spraying nozzles and their applications.

Operasi Umum

1. Nyambungkeun suplai cai: Attach a garden hose to the pump's water inlet. Ensure the water supply is fully open before starting the engine.
2. Sambungkeun Selang Tekanan Tinggi: Attach the high-pressure hose to the pump's outlet and to your spray gun.
3. Pilih Nozzle: Choose the appropriate nozzle for your task and attach it to the spray gun.
4. Mimitian Engine: Follow your pressure washer engine's starting procedure.
5. Mimitian beberesih: Squeeze the spray gun trigger to start the water flow. Always start spraying away from the surface to be cleaned to avoid damage.
6. Pareuman: Release the spray gun trigger, turn off the engine, and then turn off the water supply. Squeeze the trigger again to relieve any remaining pressure in the system.

Pangropéa

• Maintenance-Free Crankcase: The VEVOR QXB-3 pump features a maintenance-free crankcase, meaning no oil changes are required for the pump itself.
• Nozzle beberesih: Use the included nozzle cleaning pin to clear any blockages from the spray nozzles.
• Saringan Inlet: Regularly inspect and clean the inlet filter to prevent debris from entering the pump.
• Panyimpenan: Before storing for extended periods, especially in freezing temperatures, ensure all water is drained from the pump and hoses. Consider using a pump protector or antifreeze solution.
• Pamariksaan: Periodically check all connections for leaks and ensure bolts are securely tightened.

Pamérésan masalah

spésifikasi

Image: Dimensions and detailed specifications of the pump.

Garansi sareng Rojongan

Kanggo inpormasi garansi atanapi dukungan téknis, mangga tingal VEVOR resmi website or contact VEVOR customer service directly. Keep your purchase receipt and product model number (QXB-3) handy for faster service.

You can typically find contact information on the VEVOR official websitus atawa ngaliwatan pangecér mana produk ieu dibeuli.