Baseus Super Energy Pro+ Jump Starter Powerbank User Manual

1. Bubuka

The Baseus Super Energy Pro+ Jump Starter Powerbank is a versatile device designed to jump-start 12V vehicles and serve as a portable power bank for electronic devices. It features a 12,000mAh battery capacity and a peak current of 1200A, suitable for various vehicle types.

Image 1.1: Baseus Super Energy Pro+ Jump Starter Powerbank shown with different vehicle types, illustrating its broad compatibility.

2. Produk Langkungview jeung Fitur

This device combines the functionality of a car jump starter and a power bank. Key features include:

• Arus Puncak Tinggi: Provides up to 1200A peak current for effective vehicle starting.
• Kapasitas batré: 12,000mAh / 44.4Wh for multiple uses.
• Multi-fungsi: Serves as both a jump starter and a portable power bank.
• Digital tampilan: Nunjukkeun tingkat ngeusi batre.
• Lampu LED Darurat: Features multiple lighting modes for safety.
• Perlindungan Polaritas Terbalik: Integrated safety mechanism to prevent damage from incorrect connections.
• Kasaluyuan lega: Suitable for 12V vehicles with engines up to 8L (diesel) or 3.5L (gasoline).

Image 2.1: The jump starter displaying its digital battery percentage and highlighting its 1200A peak current capability.

Image 2.2: Visual representation of the 1200A high current output, powered by a 3-battery system.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• 1x Baseus Super Energy Pro+ Jump Starter Powerbank
• 1x Power Cable (USB-C)
• 1x Car Cable (EC5/Clamps)

4. Getting Started: Charging the Device

Before initial use, fully charge the jump starter. It is recommended to keep the device charged above 50% for optimal performance.

1. Connect the provided USB-C power cable to the jump starter's input port.
2. Sambungkeun tungtung kabel USB-C anu sanésna kana adaptor daya USB anu cocog (henteu kalebet).
3. The digital display will show the charging progress. Charge until the display indicates 100%.

Gambar 4.1: Sisi view of the jump starter, illustrating the various ports for charging and output.

5. Parentah Operasi

5.1. Jump Starting Your Vehicle

Ensure the jump starter is sufficiently charged before attempting to start a vehicle.

1. Connect the Smart Ignition Terminals: Insert the smart ignition terminals (EC5 connector) into the jump starter's EC5 interface. The indicator lights on the terminals will flash red and green, indicating readiness.
2. Pasangkeun kana Batré Mobil: Open the car's hood. Connect the red clamp ka positif (+) terminal batré mobil jeung cl hideungamp ka terminal négatip (-).
3. Mimitian Mobil: Return to the vehicle and start the engine.
4. Pegatkeun sambungan: Once the car starts, immediately disconnect the jump starter from the car battery. First remove the clamps from the battery terminals, then disconnect the smart ignition terminals from the jump starter.

Image 5.1: A user connecting the jump starter clamps to a car battery, demonstrating the correct procedure.

5.2. Ngagunakeun salaku Power Bank

The jump starter can charge mobile phones, tablets, and other USB-powered devices.

• Connect your device's charging cable to one of the USB-A output ports on the jump starter.
• Jump starter bakal otomatis mimiti ngecas alat anjeun.

5.3. Using the Emergency LED Light

The built-in LED light offers multiple modes for various situations.

• Press and hold the power button to turn on the emergency lighting mode.
• Press the power button again to cycle through SOS mode and Strobing mode.
• Press and hold the power button again to turn off the light.

Image 5.2: The jump starter's emergency LED light illuminating an engine bay, showing its utility in low-light conditions.

6. Pancegahan Kasalametan

• Do not short-circuit the jump starter.
• Ulah kakeunaan alat ieu kana suhu anu ekstrim (di luhur 60°C atanapi di handap -20°C).
• Jauhkeun tina jangkauan barudak.
• Ulah ngabongkar atawa ngaropéa alat.
• Ensure correct polarity when connecting to a car battery. The smart clamps feature reverse polarity protection, which will trigger an alarm if connected incorrectly.
• Disconnect the jump starter immediately after the vehicle starts.

Image 6.1: Close-up of the smart clamps, emphasizing the built-in reverse polarity protection feature.

7. Pangropéa sareng Panyimpenan

• Simpen luncat starter dina tiis, tempat garing jauh ti sinar panonpoé langsung.
• Charge the device every 3-6 months if not in regular use to maintain battery health.
• Bersihkeun alat ku kaen anu lemes sareng garing. Ulah make bahan kimia kasar atawa bahan abrasive.

8. Cara ngungkulan

• Alat teu hurung: Ensure the device is charged. If the battery level is very low, it may require a few minutes of charging before it can power on.
• Kendaraan teu bisa dihurungkeun: Pariksa yén clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge. The vehicle's battery may be severely discharged or damaged, requiring professional assistance.
• Reverse polarity alarm: Upami kelas pinteramps emit a buzzing sound, disconnect them immediately and re-attach them to the correct battery terminals.
• Ngecas laun atanapi henteu ngecas pisan: Ensure the charging cable and adapter are functioning correctly.

9. Spésifikasi Téknis

Image 9.1: Display of various international certifications for the product, ensuring compliance and safety standards.

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the official Baseus websitus atanapi hubungi pangecér lokal anjeun. Simpen resi pameseran anjeun kanggo klaim garansi.