1. Produk Langkungview
The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.
Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.
1.1 Naon dina Box
Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.
- 1 x VTOMAN V3 Pro Car Jump Starter
- 1 x Kabel Jumper Smart
- 1 x Kabel Ngecas USB Tipe-C
- 1 x Mawa Kantong
- 1 x Manual Pamaké
1.2 Diagram Produk
Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.
- Saklar kakuatan: Activates and deactivates the unit.
- Indikator Listrik: Némbongkeun tingkat muatan batré ayeuna.
- 12V Jumper Cable Interface: Port pikeun nyambungkeun kabel jumper pinter.
- Senter LED: Nyayogikeun katerangan kalayan sababaraha modeu.
- 5V/2A Type-C Input Port: Pikeun ngecas unit jump starter.
- 5V/2.1A USB Output Port: Pikeun ngecas alat éksternal.
- Integrated Compass: Pikeun bantuan navigasi.
2. Émbaran Kasalametan
Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
2.1 Pancegahan Kasalametan Umum
- Entong ngalaan produk kana kaayaan hujan atanapi baseuh.
- Do not operate the product if it has been damaged.
- Jauhkeun tina jangkauan barudak.
- Pastikeun ventilasi anu leres nalika dianggo sareng ngecas.
- Do not short-circuit the jumper clamps.
- Salawasna sambungkeun positif (+) clamp to the positive (+) terminal and the negative (-) clamp ka terminal négatip (-).
- Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.
2.2 Intelligent Safety Protections
The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:
Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.
- Anti-Spark Protection: Nyegah percikan api nalika nyambungkeun.
- Reverse Charging Protection: Protects against current flowing back into the jump starter.
- Perlindungan arus leuwih: Safeguards ngalawan aliran arus kaleuleuwihan.
- Protéksi ngecas kaleuleuwihi: Prevents battery damage from overcharging.
- Perlindungan Polaritas Terbalik: Alerts and protects against incorrect clamp sambungan.
- Perlindungan Suhu Tinggi: Pareum upami suhu internal ngaleuwihan wates anu aman.
- Perlindungan Suhu Rendah: Mastikeun operasi anu aman dina kaayaan tiis.
- Perlindungan sirkuit pondok: Nyegah karuksakan tina sirkuit pondok.
- Overvoltage panyalindungan: Ngajaga tina voltase anu kaleuleuwihitage.
- Perlindungan Overload: Nyegah karusakan tina ngagunakeun kakuatan anu kaleuleuwihi.
If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.
3. Setup jeung Ngecas
3.1 Ngecas Awal
Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).
Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.
- Connect the Type-C cable to the input port on the jump starter.
- Sambungkeun tungtung kabel anu sanés ka sumber kakuatan USB.
- The electricity indicator lights will illuminate to show the charging progress.
- Ngeusi batre pinuh butuh kurang leuwih 2.6 jam.
4. Parentah Operasi
4.1 Jump Starting a Vehicle (Standard Mode)
The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.
Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.
- Pastikeun jump starter dicas kalayan cekap.
- Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
- Nyambungkeun beureum (+) clamp to the vehicle's terminal batré positip (+).
- Nyambungkeun hideung (-) clamp to the vehicle's negative (-) battery terminal.
- Once connected, the smart cable indicator light should be héjo padet, indicating a correct connection and readiness to jump start. If it's red, check connections.
- Mimitian kendaraan anjeun.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.2 Jump Starting a Completely Dead Battery (Boost Mode)
If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.
Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.
- Follow steps 1-4 from Section 4.1.
- If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
- The indicator light should turn solid green.
- Hurungkeun kandaraan anjeun dina 30 detik.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.3 Ngagunakeun salaku Power Bank
The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.
Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.
- Connect your device's USB charging cable to the USB output port on the jump starter.
- Jump starter bakal otomatis mimiti ngecas alat anjeun.
4.4 Using the LED Emergency Light
The integrated LED flashlight has three modes for various situations.
Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.
- Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
- Pencét tombol daya sakali pikeun pindah ka modeu Strobe.
- Pencét tombol daya deui pikeun pindah ka modeu SOS.
- Press the power button once more to turn off the light.
4.5 Fungsi Kompas
The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.
5. Pangropéa sareng Panyimpenan
Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.
Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.
- Ngecas: Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
- beberesih: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasives.
- Panyimpenan: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
- Suhu: Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).
6. Cara ngungkulan
If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kandaraan teu ngamimitian. | Low charge on jump starter, incorrect cable connection, vehicle battery completely dead. | Ensure jump starter is fully charged. Check cable connections (red to positive, black to negative). If battery is completely dead, use Boost Mode (Section 4.2). |
| Smart cable indicator is red. | Reverse polarity, short circuit, or other safety issue. | Geura pegatkeun sambungan clamps. Recheck connections for correct polarity. Ensure clamps are not touching each other or other metal parts. |
| Jump starter teu ngecas. | Faulty Type-C cable or USB adapter, unit malfunction. | Try a different Type-C cable and USB wall adapter. Ensure connections are secure. If issue persists, contact customer support. |
| Lampu LED teu jalan. | Unit off, low battery. | Ensure the unit is powered on. Check battery level and recharge if necessary. |
7. Spésifikasi
Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.
| Fitur | Spésifikasi |
|---|---|
| Modél | V3 Pro |
| Puncak Arus | 2000 Amps |
| Kasaluyuan engine | Up to 6L Gasoline / 4L Diesel Engines |
| Jenis Batré | Polimer Litium (2 batré kaasup) |
| Input (Tipe-C) | 5V / 2A |
| Kaluaran (USB) | 5V / 2.1A |
| Waktu Ngecas | Approx. 2.6 hours (0-100%) |
| Waktu sayaga | Nepi ka 24 bulan |
| Suhu Operasi | -4°F nepi ka 140°F (-20°C nepi ka 60°C) |
| Dimensi produk | 5.95 "D x 3.15" W x 1.15" H |
| Item Beurat | 0.61 Pon (kira-kira 9.8 ons) |
8. Garansi jeung Rojongan
VTOMAN provides comprehensive support for its products.
- Garansi: Garansi 18 bulan ti tanggal pameseran.
- Bantosan Téknis: Pangrojong téknis hirupna sayogi.
- Kontak: For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN websitus pikeun detil kontak.
