Manual Instruksi Saklar Rocker Triple Decorator ELEGRP Modél 72611-BL

1. Bubuka

Thank you for choosing the ELEGRP Decorator Triple Rocker Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new switch. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Émbaran Kasalametan penting

• PERHATOSAN: RISIKO KEUNGGULAN LISTRIK. Always turn off power at the circuit breaker or fuse box before installation, servicing, or removing the switch.
• Install in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
• Paké ngan ku kawat tambaga atawa tambaga-clad.
• Entong dianggo di lokasi anu baseuh.
• Pastikeun sadaya sambungan kabel aman.

2. Fitur Produk

The ELEGRP Decorator Triple Rocker Switch is designed for reliable performance and ease of use, offering control for three separate lighting loads from a single gang box.

• Rational Design: Features three smooth ON and OFF paddles with tactile feedback to prevent accidental operation.
• Konstruksi kualitas luhur: Made from impact-resistant polycarbonate thermoplastic and solid steel for extended durability.
• Grounding diri: Includes a self-grounding clip for automatic connection in properly grounded metal wall boxes.
• Pamasangan Gampang: Supports both back wiring and side wiring. Features break-off plaster ears for flush alignment and a shallow body design to fit standard junction boxes.
• UL & CUL Listed: Strictly tested to UL Standards for safety and quality assurance.

Figure 1: Key features of the ELEGRP Triple Rocker Switch, highlighting its durable construction and safety certifications.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan dipasang:

• 1 x ELEGRP Decorator Triple Rocker Switch (Model 72611-BL)
• 1 x Matching Wall Plate (Screw Wall Plate, Glossy Black)
• Pamasangan screws

4. Setup jeung Instalasi

Follow these steps carefully to install your ELEGRP Triple Rocker Switch.

Léngkah Pra-Pasang

1. Pareuman Daya: Locate the circuit breaker or fuse that controls the switch location and turn off the power. Verify power is off using a voltage panguji.
2. Hapus Switch Old: Cabut pelat témbok sareng saklar anu tos aya kalayan ati-ati tina kotak témbok. Cabut kabel tina saklar anu lami.
3. Pariksa Wiring: Identify the hot (line), neutral, ground, and load wires. If you are unsure, consult a qualified electrician.

Parentah Wiring

The ELEGRP Triple Rocker Switch offers two wiring options: side wiring and back wiring.

Figure 2: Wiring options for the switch, illustrating connections for hot, neutral, and ground wires.

1. Kawat taneuh: Connect the green or bare copper ground wire from the wall box to the green grounding screw on the switch.
2. Kawat (Jalur) Panas: Connect the incoming hot (line) wire to the black screw terminal. This switch uses a common feed for all three loads.
3. Kawat beban: Connect the three load wires (one for each light/fixture) to the three brass screw terminals.
4. Kawat nétral: The neutral wire typically bypasses the switch and connects directly to the loads. Ensure proper neutral connections for your fixtures.

Pamasangan Switch

1. Tilepkeun kawat-kawatna kalayan ati-ati kana kotak témbok, nyésakeun rohangan anu cekap pikeun saklarna.
2. Insert the switch into the wall box and secure it with the provided mounting screws. Use the break-off plaster ears for flush alignment if needed.
3. Attach the included wall plate over the switch and secure it with the smaller screws.
4. Mulangkeun Daya: Hurungkeun kakuatan deui dina circuit breaker atawa kotak sekering.
5. Operasi tés: Test each rocker paddle to ensure proper ON/OFF functionality for its respective load.

Figure 3: Compact design and dimensions of the switch, ensuring compatibility with standard wall boxes.

5. Parentah Operasi

The ELEGRP Decorator Triple Rocker Switch provides simple control for three independent lighting or appliance loads.

• Each of the three paddles operates independently.
• To turn a connected load ON, press the upper part of the corresponding paddle.
• To turn a connected load OFF, press the lower part of the corresponding paddle.

Figure 4: The triple rocker switch allows control of three separate loads from a single wall box, optimizing space.

6. Pangropéa

The ELEGRP Triple Rocker Switch requires minimal maintenance.

• beberesih: To clean the switch and wall plate, wipe with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur, sabab ieu bisa ngaruksak finish.
• Pamariksaan: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them promptly.

7. Cara ngungkulan

If you experience issues with your ELEGRP Triple Rocker Switch, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact ELEGRP customer support or a qualified electrician.

8. Spésifikasi

9. Émbaran jaminan

ELEGRP products are manufactured to high-quality standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELEGRP websitus.

10. Rojongan

For technical assistance, product inquiries, or warranty claims, please contact ELEGRP customer support through the following channels:

• Online: Nganjang ka resmi ELEGRP Brand Store on Amazon.
• Surélék: Refer to your product packaging or the brand store for specific contact email.