1. Bubuka
The xTool F1 Lite is a portable and high-speed laser engraving machine designed for precision and versatility. It features a 10W diode laser, enabling rapid engraving and cutting on a wide range of materials. Its compact design and user-friendly interface make it suitable for both beginners and experienced users.
The xTool F1 Lite Laser Engraver in operation, demonstrating its ability to engrave on cylindrical objects like tumblers.
An infographic detailing the xTool F1 Lite's key features, including its 4000mm/s speed, Ultra HD detail, portability, and support for over 300 materials.
2. Setup jeung pamakéan munggaran
The xTool F1 Lite is designed for quick and easy setup. It comes pre-assembled, allowing you to begin creating almost immediately after unboxing. Follow these general steps for initial setup:
- Unboxing: Sacara saksama miceun sadaya komponén tina bungkusan.
- panempatan: Place the engraver on a stable, flat surface in a well-ventilated area.
- Sambungan Daya: Sambungkeun adaptor kakuatan ka engraver lajeng ka stop kontak kakuatan.
- Pamasangan parangkat lunak: Download and install the XCS software on your computer or mobile device. The software is intuitive and widely used.
- Penempatan Bahan: Place your desired material on the engraving platform.
- Auto-Focus & Live Preview: Utilize the auto-focus feature and live preview in the XCS software to ensure precise positioning and optimal engraving results, minimizing material waste.
The simplified customization process: Design patterns on a mobile device, preview the position on the engraver, and achieve the final engraved result.
3. Parentah Operasi
The xTool F1 Lite offers lightning-fast engraving speeds of 4000mm/s, allowing for quick completion of projects. Its Ultra Galvo system ensures high precision, capturing intricate details with accuracy.
Supported Materials and Engraving Capabilities
The 10W diode laser of the F1 Lite is capable of engraving and cutting a wide variety of materials. Note that the F1 Lite features a 10W diode laser only and does not support direct engraving on all metals or rubber, unlike models with an infrared laser.
- Ukiran: Wood, Leather, Acrylic, Glass, Rock (Slate), Paper, Cork, Stainless Steel, Coated Metals.
- motong: Up to 8mm Basswood (multiple cuts), Up to 6mm dark opaque Acrylic (multiple cuts), Paper, Leather.
The xTool F1 Lite demonstrating its capability to engrave on over 300 different materials, including paper, wood, leather, and more.
A lengkep view of an engraved image, showcasing the high-definition resolution and precision achievable with the xTool F1 Lite.
Video Produk Resmi
This video demonstrates how quickly the xTool F1 Lite can engrave a unique design onto a cup, highlighting its speed and efficiency for personalized items.
Watch this video to see the xTool F1 Lite in action, creating a special gift box with custom engravings, showcasing its precision for detailed projects.
4. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your xTool F1 Lite. Always power off and unplug the device before performing any maintenance.
- Ngabersihan lensa: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
- Cleaning the Engraving Platform: Remove debris and dust from the engraving platform after each use to prevent buildup that could affect material placement or engraving results.
- Sistem ventilasi: Ensure the built-in fan and ventilation openings are clear of obstructions to maintain proper airflow and smoke extraction.
- beberesih umum: Lap bagian luar mesin ku kaén nu garing atawa rada garingamp lawon. Hindarkeun ngagunakeun bahan kimia anu kasar.
The xTool F1 Lite features a fully enclosed design for enhanced safety, including laser light-proof housing and a smoke-free built-in fan.
5. Cara ngungkulan
If you encounter issues with your xTool F1 Lite, refer to the following common troubleshooting tips. For more complex problems, please contact customer support.
- Engraver Not Powering On: Check the power cable connection to both the engraver and the power outlet. Ensure the power switch is in the 'On' position.
- Masalah Sambungan Parangkat Lunak: Verify that the engraver is properly connected to your computer or mobile device via USB or Bluetooth. Restart the XCS software and the engraver.
- Kualitas ukiran goréng: Ensure the material is correctly focused. Clean the laser lens. Adjust engraving parameters (power, speed, passes) in the XCS software according to the material type.
- Laser Teu Tembak: Check if the safety cover is properly closed. Ensure the emergency stop button is not pressed.
- Sora anu teu biasa: Power off the machine immediately and inspect for any obstructions or loose parts. Do not operate if unusual noises persist.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | xPakakas |
| Nomer modél | MXF-K001-B10 |
| Jenis laser | 10W dioda laser |
| Laju ukiran | 4000 mm/s |
| Motion Precision | 0.00199 mm |
| ulang Precision | 0.000248 |
| Item Beurat | 17.01 pon (kira-kira 7.7 kg) |
| Ukuran Paket | 16 x 16 x 12.5 inci |
| Negara asal | Cina |
| Produsén | Makeblock Co.,Ltd |
| Tanggal Sadia munggaran | Pébruari 9, 2025 |
7. Émbaran jaminan
The xTool F1 Lite Laser Engraver comes with a 1-Taun jaminan kawates from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official xTool websitus atanapi ngahubungan rojongan customer.
8. Rojongan Palanggan
For any questions, technical assistance, or support needs, xTool provides multi-channel service options:
- Rojongan Email: Reach out via email for detailed inquiries.
- Live Chat: Access live chat support for immediate assistance.
- Rojongan Telepon: Contact our technical service team by phone.
- Grup Facebook: Join the official xTool Facebook group for community support, tips, and discussions.
Our technical service team is dedicated to providing prompt and helpful responses to ensure a smooth experience with your xTool F1 Lite.
