1. Bubuka
The Sygonix SY-6421352 RFID Code Keypad is a robust and secure access control solution designed for various environments, including corporate buildings, leisure facilities, and smart homes. It offers flexible access methods via PIN, RFID card, or a combination of both. With an IP66 weather-resistant die-cast zinc housing and illuminated keys, it ensures reliable operation even in challenging conditions.
2. Émbaran Kasalametan
- Baca sagala parentah taliti saméméh instalasi tur pamakéan.
- Ensure proper power supply (12V DC/AC, 24V DC/AC) to avoid damage.
- Pamasangan kedah dilakukeun ku jalmi anu mumpuni pikeun nyegah bahaya listrik.
- Do not expose the device to extreme temperatures or corrosive substances.
- Regularly check for signs of wear or damage. Disconnect power before any maintenance.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- Sygonix SY-6421352 RFID Code Keypad
- Pasang stiker
- 4x obeng
- 4x Colokkeun témbok
- Sekrup sirah héksagonal
- konci
- Wiring abah
- 2 x dioda
- 2x Piezo resistors
- Manual pamaké
4. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Métode Aksés | PIN / Card / PIN + Card |
| Kapasitas pamaké | Nepi ka 1010 pamaké |
| Kaluaran Relay | 2 |
| Frékuénsi RFID | EM125 kHz |
| Bahan | Die-cast Séng |
| Protéksi Ingress (IP) Peunteun | IP66 (tahan cuaca) |
| Tipe tampilan | LED |
| Papan tombol | Dicaangan |
| Voltage | 12V DC/AC, 24V DC/AC |
| Beurat | 400 gram |
5. Pamasangan
5.1 Unpacking and Component Overview
Carefully remove the keypad and all accessories from the packaging. Familiarize yourself with the keypad's front and back, noting the wiring harness connection point.
5.2 Diagram Wiring
The following video provides a detailed overview of the wiring connections for the access control system, including the keypad, lock, power supply, exit button, proximity card reader, and doorbell. Ensure all connections are secure and follow local electrical codes.
6. Parentah Operasi
6.1 Muka konci Panto
The keypad supports various unlocking methods: card only, PIN only, or a combination of card and PIN. The following video illustrates these methods.
6.2 Adding User Settings
To grant access, you need to add user cards or PINs to the system. The video below explains the process for adding new users.
6.3 Deleting User Settings
If a user's access needs to be revoked, their card or PIN can be removed from the system. The following video details the steps for deleting user settings.
7. Pangropéa
- beberesih: Ngagunakeun lemes, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents.
- Pamariksaan: Periodically check the wiring for any signs of damage or loose connections.
- Firmware: Pariksa produsén urang websitus pikeun sagala apdet firmware sadia.
- Perlindungan Lingkungan: The IP66 rating ensures protection against dust and strong jets of water. However, avoid prolonged submersion or exposure to extreme weather conditions beyond its rating.
8. Cara ngungkulan
- Keypad teu ngaréspon: Check power supply connections. Ensure the unit is receiving adequate power.
- Card not recognized: Ensure the RFID card is correctly presented to the reader. Verify the card is properly registered in the system.
- PIN not working: Double-check the entered PIN. Ensure the PIN is correctly registered and the user mode allows PIN access.
- Panto teu muka konci: Verify the lock mechanism is functioning correctly. Check wiring between the keypad, power supply, and lock. Ensure the correct access method (card/PIN) is being used.
- System beeps continuously: Refer to the specific beep codes in the full manual for diagnostic information. This may indicate an error or an open circuit.
9. Garansi jeung Rojongan
This Sygonix SY-6421352 RFID Code Keypad comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
