Buku Panduan Pangguna Pedal Kompresor SONICAKE Source Comp

Bubuka

Thank you for choosing the SONICAKE Source Comp Compressor Pedal. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new effects pedal. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

Produk Leuwihview

The SONICAKE Source Comp is a mini analog compressor pedal designed for electric guitar and bass. It features a full-analog circuit for classic compression characteristics and offers extensive control over your sound dynamics with six adjustable knobs. The pedal is equipped with a buffer bypass to maintain signal integrity when disengaged and includes an LED indicator for real-time dynamic feedback.

Image: The SONICAKE Source Comp Compressor Pedal, showcasing desain kompak na perenah kontrol.

Fitur konci:

• Desain Sirkuit Analog Pinuh: Provides a classic compressor sound.
• Rich Parameter Knobs: Offers comprehensive control for dynamic accommodation.
• Dynamic LED Feedback: Multi-color LED indicates gain reduction in real-time.
• Panyangga Bypass: Preserves signal strength and quality when the pedal is off.
• Kompak sareng awét: Full metal shell, sturdy and suitable for crowded pedalboards.

Image: Diagram illustrating the full-analog circuit design of the Source Comp pedal, emphasizing its classic compressor sound.

Image: Illustration showing the LED indicator changing color based on signal input, providing dynamic feedback.

Kontrol jeung Fungsi

The SONICAKE Source Comp pedal features six control knobs, a footswitch, and an LED indicator. Refer to the diagram below for component identification.

Image: A numbered diagram of the SONICAKE Source Comp pedal, highlighting its various controls and input/output jacks.

1. Input Daya DC 9-18V: Connect a 9-18V DC center-negative power supply (not included).
2. IN (Input) Knob: Adjusts the input level of your signal. Higher settings increase the amount of compression.
3. OUT (Output) Knob: Controls the overall output volume of the pedal. Use to match levels when the pedal is engaged or disengaged.
4. kenop garing: Blends the dry (uncompressed) signal with the compressed signal. Allows for parallel compression.
5. Kenop RATIO: Sets the compression ratio, determining how much the signal is compressed once it exceeds the threshold.
6. Kenop Serangan (ATK): Adjusts how quickly the compressor reacts to the initial transient of a note.
7. Kenop REL (Pelepasan): Controls how quickly the compressor returns to its uncompressed state after the signal drops below the threshold.
8. Jack Input: Connect your instrument (guitar or bass) here.
9. Jack kaluaran: Nyambung ka anjeun amplifier atawa pedal salajengna dina ranté sinyal anjeun.
10. Saklar suku: Engages or disengages the compression effect.

Disetél

Follow these steps to set up your SONICAKE Source Comp pedal:

1. Sambungan Daya: Connect a 9-18V DC center-negative power supply to the DC input jack (1). Ensure the power supply meets the specified voltage sareng sarat polaritasna.


Image: Diagram illustrating the correct DC 9-18V center-negative power connection for the pedal.

2. Sambungan Instrumen: Connect your electric guitar or bass to the Input Jack (8) using a standard 1/4-inch instrument cable.
3. AmpSambungan Lifier: Connect the Output Jack (9) to your amplifier's input or to the input of the next pedal in your effects chain using a standard 1/4-inch instrument cable.
4. Setélan Awal: For a starting point, set all knobs (IN, OUT, DRY, RATIO, ATK, REL) to the middle (12 o'clock) position.

Parentah Operasi

Once the pedal is set up, you can begin to explore its compression capabilities:

1. Lebetkeun pedal: Press the Footswitch (10) to activate the compression effect. The LED indicator will illuminate.
2. Adjust Input (IN): Slowly increase the IN knob. As you increase the input, the LED will change color (e.g., from green to orange/red) indicating gain reduction, meaning compression is occurring. Higher IN settings result in more compression.
3. Set Ratio: Adjust the RATIO knob to control the intensity of the compression. Lower ratios provide subtle leveling, while higher ratios create a more squashed, sustained sound.
4. Control Attack (ATK): The ATK knob determines how quickly the compressor engages. A fast attack (lower setting) will compress the initial transient of a note, while a slow attack (higher setting) allows the initial pick attack to pass through uncompressed before the compression kicks in.
5. Control Release (REL): The REL knob sets how long the compression effect lasts after the signal drops. A fast release (lower setting) can make the sound pump, while a slow release (higher setting) provides a smoother, more sustained effect.
6. Blend Dry Signal (DRY): Use the DRY knob to mix your original, uncompressed signal with the compressed signal. This parallel compression technique can help retain the natural dynamics and punch of your playing while still benefiting from compression.
7. Adjust Output (OUT): After setting your desired compression, use the OUT knob to adjust the overall volume of the pedal. Ensure the volume matches your bypassed signal or provides a slight boost if desired.

Experiment with different knob combinations to find the compression settings that best suit your playing style and musical context. The LED indicator provides visual feedback on the amount of gain reduction applied.

Pangropéa

• beberesih: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Panyimpenan: Simpen pedal dina lingkungan anu garing, jauh tina suhu anu ekstrim sareng sinar panonpoé langsung. Cabut catu daya upami henteu dianggo kanggo waktos anu lami.
• Sasayogian tanaga: Always use a regulated 9-18V DC center-negative power supply. Using an incorrect power supply can damage the unit and void the warranty.

Pamérésan masalah

• Henteu aya sora:
  • Pariksa sadaya sambungan kabel (instrumen, amppanguat, kakuatan).
  • Pastikeun catu daya disambungkeun kalayan leres sareng tiasa dianggo.
  • Pariksa yén alat anjeun sareng amplifier berpungsi leres.
• Sora/Dengung Kaleuleuwihi:
  • Ensure you are using a high-quality, isolated power supply. Daisy-chaining power with other noisy pedals can introduce hum.
  • Lower the IN knob setting. High compression levels inherently raise the noise floor.
  • Pariksa aya puteran taneuh dina ranté sinyal anjeun.
  • Test the pedal in a different electrical outlet or location to rule out external interference.
• Pangaruhna Henteu Ngahibur:
  • Press the footswitch firmly.
  • Check if the LED indicator illuminates when the footswitch is pressed. If not, verify power supply.

spésifikasi

Garansi sareng Rojongan

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official SONICAKE websitus. Anjeun oge bisa ngahubungan pangecér Anjeun pikeun pitulung.

Pabrikan: Changsha Hotone Audio Co., Ltd.
Alamat: Unit 1, 2, 6, 7, 2nd Floor, East Block, Hunan University Science Park, No.186, Guyuan Road, Yue Lu District, Changsha City, Hunan Province, P.R. China

UPC: 0843037102640