Fieety V9/Ultra10 Vacuum Cleaner Replacement Battery User Manual

1. Bubuka

This manual provides essential instructions for the safe and effective use, installation, charging, and maintenance of your Fieety V9/Ultra10 replacement battery. Please read this manual thoroughly before using the product and retain it for future reference.

2. Parentah Kasalametan

Observe the following safety precautions to prevent damage to the battery or personal injury:

• Ulah ngabongkar, ngarobih, atanapi nyobian ngalereskeun batréna.
• Keep the battery away from water, heat sources, and direct sunlight.
• Use only the charger specified for your Fieety V9/Ultra10 vacuum cleaner.
• Ulah pondok-circuit terminal batré.
• Simpen batréna di tempat anu tiis sareng garing upami henteu dianggo.
• Buang batré anu dipaké nurutkeun peraturan lokal.

3. Pamasangan batré

Follow these steps to install the replacement battery into your Fieety V9 or Ultra10 vacuum cleaner:

1. Ensure the vacuum cleaner is turned off and disconnected from any power source.
2. Locate the existing battery compartment on your vacuum cleaner. This is typically on the main body of the handheld unit.
3. Press any release buttons or slide latches to open the battery compartment or release the old battery.
4. Taliti nyabut batré heubeul.
5. Align the new Fieety replacement battery with the connectors in the compartment.
6. Gently push the new battery into place until it clicks securely. Ensure it is firmly seated.
7. Close the battery compartment cover if applicable.

Image: The Fieety V9/Ultra10 replacement battery module.

4. Ngecas Batré

To ensure optimal performance and longevity, charge the battery fully before first use and whenever the battery level is low.

1. Connect the vacuum cleaner's charger to a power outlet.
2. Colokkeun carjer kana port ngecas dina vacuum cleaner.
3. The battery indicator lights on the vacuum cleaner will typically show the charging status. Refer to your vacuum cleaner's main manual for specific indicator patterns.
4. Charging usually takes several hours. Disconnect the charger once the battery is fully charged.

Catetan: The battery can often be charged independently of the vacuum cleaner if your model supports it, allowing for continuous use with a spare battery.

5. Operating with the New Battery

Once installed and charged, your Fieety V9/Ultra10 vacuum cleaner is ready for use with the new battery. The replacement battery is designed to provide consistent power for effective cleaning.

• Runtime: The battery is designed to provide an extended runtime, typically up to 65 minutes, depending on the power mode and attachments used.
• Modeu kakuatan: Utilize the different power modes of your vacuum cleaner as needed. Higher power modes will consume battery faster.
• Indikator batré: Monitor the battery level indicator on your vacuum cleaner to know when recharging is necessary.

Image: A Fieety vacuum cleaner in operation, illustrating the potential 65-minute runtime.

6. Pangropéa

Proper maintenance extends the life of your battery and ensures consistent performance.

• Ngabersihan Kontak: Periodically inspect and clean the battery contacts on both the battery and the vacuum cleaner with a dry cloth to ensure good electrical connection.
• Panyimpenan: If storing the battery for an extended period, charge it to approximately 50-60% and store it in a cool, dry place. Avoid storing fully charged or completely depleted batteries for long durations.
• Suhu: Ulah ngantepkeun batréna kakeunaan suhu anu ekstrim, boh panas boh tiis, sabab ieu tiasa ngirangan kinerja sareng umur batréna.

7. Cara ngungkulan

If you encounter issues with your replacement battery, consider the following common solutions:

• Batré Teu Ngecas:
  • Ensure the charger is properly connected to both the power outlet and the vacuum cleaner.
  • Pariksa naha stop kontak listrik fungsina.
  • Verify that the battery is correctly installed and seated in the vacuum cleaner.
  • Ngabersihan kontak batréna.
• Runtime pondok:
  • Pastikeun batre tos dicas pinuh sateuacan dianggo.
  • Check for blockages in the vacuum cleaner's filters or brush roll, which can increase power consumption.
  • Operating in high power modes will naturally reduce runtime.
• Vakum henteu hurung:
  • Pastikeun batréna geus dicas pinuh.
  • Reinstall the battery to ensure a secure connection.
  • Check the vacuum cleaner's main power switch.

Lamun masalah persist, kontak rojongan customer.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and customer support, please refer to the documentation provided with your original Fieety vacuum cleaner or visit the official Fieety websitus. Anjeun ogé tiasa ngahubungi penjual langsung ngalangkungan platform pameseran anjeun pikeun kéngingkeun bantosan.

Dukungan Online: Visit the Fieety Store on Amazon